Jump to content
SAU Community

Recommended Posts

my autos only screwed cause i drive the crap out of it, id always intended on getting the conversion but what most of you manual guys are sayin about autos is just rediculas.

i reakon for every three clutches yous would go through id go through a box so stop whaling on autos

mines done 115000kms i think that that is a pretty good effort

  • Replies 99
  • Created
  • Last Reply

Top Posters In This Topic

I can tell that most of the people that are saying manuals are better have never driven a proper auto. I have a R32 GTST that has a worked auto and can tell you that the control of the car around the twisties is at least equal to a manual. In a straight line nothing comes close. If autos are so easy to drive you have another thing coming put some power through them and youll find out what i mean.

looking at it from a mechanical point of view, an automatic gearbox due to the complexity of its synchro's and gearing shouldn't be able to support powerful applications, let alone violent driving with such power.

Just wanna know how much power the guys claiming auto boxes are gods gift to boy racers are making, and lap times/quarter mile times if you guys have any for comparison with their manual equivalents. Street racing dosen't count for shit btw just like G-tech quarter mile times.

looking at it from a mechanical point of view, an automatic gearbox due to the complexity of its synchro's and gearing shouldn't be able to support powerful applications, let alone violent driving with such power.

.

Then why do most (all??) BIG BIG horse powered drag cars (read funny cars, top fule) run a modified auto. I cant think of a more violent application than the type of launch they are put through. (they dont use dog boxes with quick shifters)

My auto works fine with 200rwkw. MV automatics claim it should be good for close to 300 before it needs to be modified. From what I gather that puts the auto box on par with a manual.

I cant post 1/4 mile times yet, but I hope to have the car down the drags latter this summer. (no use attempting a run with tein HA's on the car). Someone on these forums has posted a mid to high 12 second in an auto with a little over 200rwkw.

hey 4door hows the box going with powerfc?

are u running powerfc byitself ie standard ecu isnt there?

ive been in an auto with pfc and everyone who has tried, all said the same thing.. its annoying to drive unless at full throttle

Limited in what way?

limited as in less options for aftermarket engine management . no powerfc , no wolf , virtually no plug in ecus will run the auto exactly the same as the stock ecu from what I have been able to accertain .

but if you know anymore information on the subject please share cause I have an auto r33 sedan

theres a rather large thread floating around a few weeks back on auto engine management and that was the general consensus of it also

Someone want to tell Michael Schumacher (Sp??) that he is a crap driver because he drives an auto in F1

I love it when people fall back on this kind of stuff..

Sorry to tell you but your Auto and an Auto in a F1 is so different it's not even funny..

If your car had an electrohydraulic gear system that was worth 10x the price of the car.. then yes, maybe I would like to drive that auto.

We are talking about the difference between a factory auto and a factory manual that "Skylines" came out with. As this is SDU..

This does not include a "modified auto" for drag also, as once again.. this is nothing like your stock Nissan auto.. that is going to last 5 minutes with 300rwkw.

Most of us that are discussing this have our cars as daily drivers, do some track work etc. And most of us are using stock Nissan parts..

For all round performance, that lasts and performs.. the manual is best.

Well firstly let me point out that i'm not taking sides here, i have owned both autos and manuals and both have their good points but i have to point out a lot of the complete crap that has been written here. It was mentioned briefly on the first page but wasn't brought up again.

I am assuming there are no engineers posting in this thread, because if there were they would tell you that some energy (and therefore power) is lost at EVERY linkage. Therefore seeing as the auto has more components and therefore more linkages it MUST make less power than a manual with similar mods.

There is no point arguing 'my auto skyline feels faster than my mates manual', you cannot argue with science. It has been proven over hundreds of years.

An auto skyline against a manual skyline with EXACTLY the same mods, the manual will win EVERY time, no arguments, assuming the manual driver can drive. Not wanting to open a can of worms, just pointing out some scientific facts. The reports i've seen estimate the drivetrain losses to be about 20-25% greater in an auto than a manual.

Cheers

Arkon I'm running a Link in my car and it works a treat... Gears are smooth 1st to 2nd and on all the down changes, you couldn't even tell it was an aftermarket ECU.

However, an ECU is only as good as the tuner, so I’m not sure if there’s anyone in WA that is awesome at it. I had mine fitted at AVO here in Victoria. They recommended them cause that’s what they feel most comfortable tuning, so that’s what i went with.

You say wolf 3d V4 won’t support the auto?? I thought I read somewhere SST was tuning them??

looking at it from a mechanical point of view, an automatic gearbox due to the complexity of its synchro's and gearing shouldn't be able to support powerful applications, let alone violent driving with such power.

Just wanna know how much power the guys claiming auto boxes are gods gift to boy racers are making, and lap times/quarter mile times if you guys have any for comparison with their manual equivalents. Street racing dosen't count for shit btw just like G-tech quarter mile times.

189.4 rwkw

13.8 qm

1:15.52 wakefield park

both on shitty tyres.

An auto can be quicker because at lower revs the torque converter actually increases the torque, ie more than the engine is putting out.

I found at the drags that up to at least 3/4 track I was in front of far more powerful cars but they stormed home past me for a quicker ET. I put it down partially to the power lost through an auto being at the top end of the spectrum (my opinion only) and also the rev drop between 2nd and 3rd gears being too much.

Arkon I'm running a Link in my car and it works a treat... Gears are smooth 1st to 2nd and on all the down changes, you couldn't even tell it was an aftermarket ECU.  

However, an ECU is only as good as the tuner, so I’m not sure if there’s anyone in WA that is awesome at it. I had mine fitted at AVO here in Victoria. They recommended them cause that’s what they feel most comfortable tuning, so that’s what i went with.

You say wolf 3d V4 won’t support the auto?? I thought I read somewhere SST was tuning them??

is your link a wired in or a plug in ? if its plug in its the first 1 I have seen that works . As its a board that goes inside your ecu it might possibly work .

if its wired in then yes it seems they can work , as my post refered to plug in ecus . Essentially it seems that the auto trans needs some inputs from the factory sensors and as long as those are still given to the auto when you wire in your new ecu you may be alright . There have been a few autos running autronics in wa sucessfully .

As for the wolf plug in steve claimed it did work , then when I asked if it operated exactly like the factory ecu he admited it did operate differently. This is what he said :

"Aftermarket ECUs all effect autos but we have had no real problems.

Sensor benders also effect autos if you need to make large changes as the load values etc are substantially altered and do alter the Autos performance.

Worst case we have had is like a mild shift kits been fitted."

heres some threads

http://www.skylinesaustralia.com/forums/sh...uto+aftermarket

http://www.skylinesaustralia.com/forums/sh...uto+aftermarket

hey 4door hows the box going with powerfc?  

are u running powerfc byitself ie standard ecu isnt there?

The car runs great (well it was until I blew the turbo, hope to pick it up tonight with the new GCG turbo installed and tuned)

As you indicated, but for the benefit of others, my car runs on a PFC (without a std ECU) The improvement in mid range power with the PFC is excellent, and the removal of boost and speed limiters was definitely needed.

The best my car has made to date was just under 200rwkw, but that was a safe tune for day-to-day driving (didn’t want to push it too far). With the new turbo I hope to get around 230, but I am really looking for the improvement across the whole power curve rather than just chase top end power.

For those with Autos I would seriously recommend getting a shift kit installed from MV Automatics in Adelaide. The skyline auto isn’t really a slush box when compared with what Ford or Holden offer, but the improvement with the kit is worth every dollar ($300 installed).

From memory they had to wire the TPS to the auto ECU. The Link also uses a MAP sensor so that had to be wired in, so there was a bit of extra work.

The added bonus thou is as it doesn’t say Apexi on the box it probably works out the same $$ to have one wired in and tuned.

The car runs great (well it was until I blew the turbo, hope to pick it up tonight with the new GCG turbo installed and tuned)

As you indicated, but for the benefit of others, my car runs on a PFC (without a std ECU) The improvement in mid range power with the PFC is excellent, and the removal of boost and speed limiters was definitely needed.

The best my car has made to date was just under 200rwkw, but that was a safe tune for day-to-day driving (didn’t want to push it too far). With the new turbo I hope to get around 230, but I am really looking for the improvement across the whole power curve rather than just chase top end power.

For those with Autos I would seriously recommend getting a shift kit installed from MV Automatics in Adelaide. The skyline auto isn’t really a slush box when compared with what Ford or Holden offer, but the improvement with the kit is worth every dollar ($300 installed).

so how come your power fc works perfectly when others struggle with harsh shifts and incorrect gears and kickdowns ? did they do anything when installing ? send anything to the auto ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...