Jump to content
SAU Community

Recommended Posts

During and after general production, a handful of special models were released in small numbers. These rare cars generally featured a small variation from the normal, and seemed to be more like test models than anything. The Autech R32 is an example of this. The Autech R32 was tuned by Autech and was basically a four door R32 GTR, without the turbos, as it housed an RB26DE in its engine bay and an automatic gearbox. You can deduce from the name that the engine was a 2.6 litre DOHC EFI in-line six normally aspirated variant. Very good for pulling trailers since they have tonnes of torque, perhaps the Autech would make a race car tractor? or nice non-turbo family touring car See Autechs page for more info.

Model E-HNR32

Dimensions 4580ױ695ױ360 mm

Weight 1480kg

Engine RB26DE

Power 220PS /6800rpm

Wheel 205/55R16 88V

r32_gtb_002.jpg

r32_gtb_001.gif

rb26de.jpg

search for RB26DE for a list of all the threads covering this car and its engine. There was even a thread from about a year ago that was recently dug up about the RB26DE engine for sale at a wrecker in adelaide or somewhere.

There is an actual limited series of auto GTR's released by a tuner (can't remember the name tho). They all had "official recognition" papers, which are the jap equivalent of an engineer's certificate. But they weren't autech N/As

^^^ Shan I think they were responsible for the R32 4-Door GT-R aswell? You know the one...

Btw, there was an R32 Autech Version for sale at Yahoo JP Auctions for about 1,500,000 yen... I'd get one if I knew who could do the auto -> manual conversion here for reasonable cost.

i have some brochures for that car, only the people who understand japanese will be able to read it but theres a few pics to look at.

Half of the Autec r32 and the other half an R32 GTB-4 ( rb26dett gts-4 sedan?)

i have some brochures for that car, only the people who understand japanese will be able to read it but theres a few pics to look at.

Half of the Autec r32 and the other half an R32 GTB-4 ( rb26dett gts-4 sedan?)

i just got back from Japan and bought that mag :P

there is one moded N/A GTR, with compression rate rise to 12:5:1, with 100 shot NOS.

pull 380hp@9800rpm with a 10000rpm redline.

Then they race it with some similar hp light mod GTR, and it win for about 1 sec in a lap.

they claim the response is a lot better

there is a dude in the GTR Owners club in japan who owns an R32 GTR which has been converted to N/A!!! lol yes believe it or not he's converted the RB26 engine to an RB31 N/A engine. goes like its nutsack was being bitten by a gerbil too.

Maybe rezz or someone who's a lil more active in GTROC-JP can contact him and find out more.

Completely off topic, but I just noticed the stick under the rear-view mirror of the R32 AUTECH Skyline (in the scans posted -- see http://www.skylinesaustralia.com/forums/at...achmentid=28810 -- its a white 4 on a red background).

What is the signficane of the sticker?

LW.

oh is that off a website? hmm might have to buy the catalogue then... one of these days I'll scan em all in and then sell em... its becoming an expensive habit... datalogue collecting.

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...