Jump to content
SAU Community

Recommended Posts

  • Replies 142
  • Created
  • Last Reply

Top Posters In This Topic

Rotomotion is the go for Microtech.

Chris mills does not own the workshop anymore he now runs the shop out the front.

They do a lot of Asian cars there now and tuned many of the Fast friday cars last week both Trev and asian.With the equipment in Chris mills performance service and Dyno center

there is not much that cant be done there inc full engine building inc in house machine shop

etc.

AJ is and has long been a respected Tuner.

With SST now closed I don't know of realy decent place that respects you as a client.

Thats what it is!

It's the owners that set the standards of the shop and take time to get to know you and your car. Most people around town are only concerned with money and having a drink at the end of the day.

With  SST now closed I don't know of realy decent place that respects you as a client.  

Thats what it is!  

It's the owners that set the standards of the shop and take time to get to know you and your car. Most people around town are only concerned with money and having a drink at the end of the day.

Harsh

Not much has been spoken of AJ's tuning at Speedworks. Has anybody on here had their car tuned at Speedworks? Also, does AJ tune PFC?

hey gtst89, my friends car was tune by speedworks and he is more than happy with the results i have been in the car and what can i say the car is making over 400rwhp with a rom-tune ecu without 1 problem :P many people have said speedworks to be slow etc but my friend said if ur paying customor it isnt slow :D

also banned on here had his r32 gtr built/tune by them and he was happy 2 :D

who would be best to get my R33 GTS-T with a microtech LT-12 tuned by?

This will sound lame after all the wondrous advice previously given but we can tune your microtech.

Failing that , Mick at Ovaboost is very good and has some quick Nissans on the product. :D

Cheers

Ken

With  SST now closed I don't know of realy decent place that respects you as a client.  

Thats what it is!  

It's the owners that set the standards of the shop and take time to get to know you and your car. Most people around town are only concerned with money and having a drink at the end of the day.

Actually sexzilla, upon reflection, I take offence to that post...

I don't often arc up but that is such a broad sweeping statement it requires an answer.

If you are saying that SST is the only shop that provides service, then why have they closed??

And PSI, Hyperdrive, X Speed, Speedworks, Barry dyno, Cypher Industries, Ovaboost, CMP, Wheelspin,Supertec, EvoR and a few I can't remember/don't know are all useless and only chasing the money or beer.

So you have been to them all and made a value judgement as to there capability/drink worthiness??

Pull your ****in head in...

Ken

ill throw my 2 cents in.

the best service i ever recieved was at hyperdrive. every single thing they did was done with a standard second to none.... whether that be answering a phone call or running my car on the dyno

close seconds... speedworks and xpseed ... both very very good.

as for al's comments, i doubt there is anyone out there who will better Ken and Lumpy for taking time to get to know you as a person 1, and as a customer 2.

i will also throw in my 2cents,

everyone knows im not the smartest person when it comes to cars and i ask about 100 question which are all the same just different words. But both ken and lumpy have looked after me 100% whether it be showing me how to install the fmic piping, or fixing my car after i almost killed it when it blew an oil line (just rock up and they fix it)

both take the time to listen and answer my question, i once had a 30/40mins talk with ken just about my skyline good upgrade and everything else related to cars :D

Not much has been spoken of AJ's tuning at Speedworks. Has anybody on here had their car tuned at Speedworks? Also, does AJ tune PFC?

Getting the new R tuned there on Friday, flying down for it too, will post results in another thread once I get them.

I don't know what people are whinging about, there is no one and I mean no one up here that is even competent to provide a service, every time I ahve let my car out to anywhere up here it has come back with some form of mal service done to it.. I had to get service on my 180 due to warranty, no warranty on the R32 this time.. A little run down if I may:

TNT smashed the car upon taking it off of the truck for delivery..

The smash repairer left 6 bolts only half in after fixing abovementioned damage.

First service the dump was removed to fit EGT probe, snapped a bolt in turbo (this happens is cool) but when they put the turbo back on, they only put one nut on it, resulting story blown gasket, lots of squeaking, found it my self.

Next service, threaded sum plug and must have only done up finger tight, resultant effect 2 litres of oil on driveway and a repair job for me while I was at it.

Next service, vehicle is seen doing close to warp speed (in town I might add) by one of my good friends..

Next Service, threaded sump plug thread on ym nice new Trust Sump, (car was smashed only a weke after this so the sump came off and now has a heli coil in it, in a mates car)

I just wanted my car to be released to a workshop/mechanic/repairer without it coming back in worse condition than it went in..

The nearest tuner, is Port Hedland, 250km/h away, they don't do 'imports' (they also classified a VL Turbo and import), and won't let cars on their dyno if the owner is present, you have to leave it with them and come back the next day... hrrmmm, not too sure on that one.. I also heard a rumour that they have let a car go on their dyno too, which would not be pretty I would say..

Yorik, nice avatar..hmmm..love those tits.

Anyway, AJ is a competent tuner on Power FC but so are we. We have the datalogit software ( mostly) to tune it and do a few cars for the Karratha mob on behalf of D Konig.

We have a reasonable reputation on them and PNBlight will attest to the HP we attained for him out of his.

Cheers

Ken

[bANNED] cant remember his sau nick but they are his car plates

Boosted_RB26 i believe?

anywayz, Sexzilla i think ure post isnt fair at all to any of the workshops in Perth... u might wanna take it back..

i must say, ive used Cypher and Zack is a champ... havent used Hyperdrive but ive known Ken since before he opened Hyperdrive and he's a great peoples person.. I havent done much at SST except a few repairs but I get along well with Steve and he's given me heaps of advice not neccesarily car related.. at the end of the day, these guys are just regular people and if u treat them well, walk in with a good attitude instead of being stuck up then i believe they will treat you in the same way.. not every workshop is for you, naturally each person would have their preffered workshop.. the best is to stick to the one you feel is best for you and BE LOYAL! lots of ppl jump workshops for the sake of saving 20-30 bucks.. yeah i know its money but in the long run, being loyal to a workshop saves you heaps of cash too..

sorry for the long post

Cliffs = choose workshop, stick to it, dont bag others, kthxbai

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...