Jump to content
SAU Community

Ipod Fm Transmitter Help

DR.ZOIDBERG

By DR.ZOIDBERG,
in Car Audio & Electrical

 Share

Recommended Posts

DR.ZOIDBERG Proficient

DR.ZOIDBERG

Posted
Posted

Hey

Im thinking of getting a Ipod and a fm transmitter to broadcast the ipod through my car speakers.

I have been looking at Roadtrip and Transpod which are the ones the transmit and charge ur ipod at the same time as well as hold it.

Could anyone tell me how good these are? or if there is a better way of playing the music through my car speakers with out a big hassel.

My factory head unit alredy has a line out for the factory cd stacker which I dont have (2 RCA cords and 1 stacker cord)

I anyone can let me know about these transmitters, clearness and quality etc or another way I would be greatful

Thanks

CHASP

Link to comment
https://www.sau.com.au/forums/topic/69840-ipod-fm-transmitter-help/
Share on other sites
Gerardrh34 Enthusiast

Gerardrh34

Posted
Posted

Im not too sure about the Roadtrip and the Transpond.

I have a Griffen Itrip which only transmits so it doesnt charge but when i use to use it i thought it was pretty good sound quality.

Just takes a bit of trial and error where to set the transmitter and where to actually have it placed in the car.

Kaido_RR Grand Master

Kaido_RR

Posted
Posted
They are crap. Connect it to your deck or if you can't, get a better deck...

i agree ;)

i bought a Griffin itrip for my ipod mini, i took it back after a day, the sound qaulity was shithouse, it sounded shit on both my car deck and on my very $$$ sony sound system in my house.

My tip say away from them untill apple mades one :D

matress Apprentice

matress

Posted
Posted

you can get belkin ones from jb hi-fi and the like that you can tune in to any station you like for about $70.

big w sell fm transmitters for $40 but they are locked to 4 stations, which it will swap from one to the other if it interferes with another station.

dont know what the quality is like of either one, but i plan on getting one for my Hi-MD

Guest Emperor

Guest Emperor

Posted
Posted
Yeah the signal is not very strong.  I'd get an RCA to 2.5mm stereo jack cord and hang it out the back into the passenger footwell.  Connect your ipod there.  You can just tuck the cord up behind the dash when not in use.

hey abo bob, this sounds like a good idea, do most aftermarket deck allow you to plug the RCA plug in (warning i am audio newbie), My friend has a similar setup in his car and the quality is very good (but his is connect to some cheap mp3 player :))

Thanks Emperor

Beer Baron Grand Master

Beer Baron

Posted
Posted

no, the input on your amp is supposed be to connected to the output on your deck. the output on your amp goes to the speakers.

what you need is what is known as an "auxilary input". don't bother pulling your deck out. you can check this by simply hitting the 'source' button. it should go through 'CD', 'Tuner' and (if you have one) 'Aux' if you get that option you will no doubt have an RCA input on the back of your deck.

siksII Grand Master

siksII

Posted
Posted

the belkin fm transmitters are crap i bought one and returned it after one day..

the signal was not strong enough for the cd player to get more than about 30 seconds before fuzzing out and in again.

it would probably be better if you did not live in a cbd area..

  • 3 weeks later...
Silver-Arrowz Grand Master

Silver-Arrowz

Posted
Posted

I got a griffen fm transmitter and it's only ok. Maybe because of all the radio stations in Sydney but it's mission impossible trying to find the right band. And even still it's only ok. When I get my next car I'm gonna get an Alpine deck which can connect directly to my ipod.

raz0r$harP.UK Grand Master

raz0r$harP.UK

Posted
Posted
no, the input on your amp is supposed be to connected to the output on your deck. the output on your amp goes to the speakers.

what you need is what is known as an "auxilary input". don't bother pulling your deck out. you can check this by simply hitting the 'source' button. it should go through 'CD', 'Tuner' and (if you have one) 'Aux' if you get that option you will no doubt have an RCA input on the back of your deck.

my pioneer deck will only bring up the AUX if there is something connected to it.. same with the cd changer....

paulr33 Grand Master

paulr33

Posted
Posted

the new alpines have a direct line into the ipod and will show the id3 tags and stuff direct from the ipod unit, its some form of firewire link or something, someething alpine and apple worked on together

mikep Community Regular

mikep

Posted
Posted
my pioneer deck will only bring up the AUX if there is something connected to it.. same with the cd changer....

Pioneer have finally released an Ipod interface. It plugs into the cd stacker interface and gives you complete control over the Ipod using the controls on the head unit which also displays the tag info. I'd imagine JB Hifi and similar stores would have 'em in stock by now.

mike

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • funkymonkey
      Jacks that fit under GTR lips that can reach the subframe?

      By funkymonkey · Posted

      I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...