Jump to content
SAU Community

Recommended Posts

Hi All,

There was quite an interesting dicussion of oil filters in the maintenance section awhile ago.

In a similar vein, I have search for some discussion of fuel filters but drawn a blank. They get mentioned an awful lot, but usually its 'replace your fuel filter'. Soooo, is there anything to choose between the various fuel filters one can buy? Should I just grab the genuine article from Nissan, or will any supercheap yum-cha brand do?

Thoughts and suggestions are welcome :(

Lucien.

Link to comment
https://www.sau.com.au/forums/topic/71633-fuel-filters/
Share on other sites

genuine nissan is (always has been) the go for me.

I wouldn't bother with aftermarket ones in this case. unless of course you had a 10000hp fuel pump and 1000cc injectors and the stock filter was a restriction.

Link to comment
https://www.sau.com.au/forums/topic/71633-fuel-filters/#findComment-1320812
Share on other sites

As mmmgtir mentioned the OEM fuel filter is still pretty good & quite efficient.

When I first bought my car I was experiencing a pressure drop of around 2.4+psi, the car had a cheap fuel filter. I had it replaced with a Nissan item. Now, although Im only running just under 200rwkw, Im told theres only a pressure drop of under .8psi.

Basically, you would only want to upgrade to a performance one if you want to decrease the pressure drop across & near the filter. Performance filters normally have a pressure drop of <.3psi & filter down to the 10-30 microns range (not sure what the OEM is rated at).

Link to comment
https://www.sau.com.au/forums/topic/71633-fuel-filters/#findComment-1320944
Share on other sites

Interesting. I just spoke to Crows Nest Nissan to try and order the OEM fuel filter. The part number they have comes up as no longer being produced, and there is no updated number attached.

Does anyone have the part number -- one they have actually used, not just ripped from FAST because Crows Nest Nissan is using FAST -- for the R32 GT-R fuel filter ?

LW.

Link to comment
https://www.sau.com.au/forums/topic/71633-fuel-filters/#findComment-1321079
Share on other sites

Can that part also be used on a 2001 R34 GTT??

With the proviso that's it's better to have the VIN of your car (from the Nissan ID plate on the firewall), according to FAST the PN for the fuel filter on your car is:

16400-41B05

Suggests the filter is different to the R32 type.

Link to comment
https://www.sau.com.au/forums/topic/71633-fuel-filters/#findComment-1321681
Share on other sites

With the proviso that's it's better to have the VIN of your car (from the Nissan ID plate on the firewall), according to FAST the PN for the fuel filter on your car is:

16400-41B05

Suggests the filter is different to the R32 type.

SteveL PM SENT.

Link to comment
https://www.sau.com.au/forums/topic/71633-fuel-filters/#findComment-1322076
Share on other sites

The OEM R32 GTR fuel filter PN is:

16400-72L00

but this was superceded by PN:

16400-72L05

and that was further superceded by PN:

16400-53J10

I will run those past Troy and see what turns up.

someonestolecc: Make sure you ask for Troy. Apparently they do COD; personally I just go and pick it up. Your best to do your research before hand and have part numbers handy as they are obviously not import specialist: they are just willing to help so cut them a little slack ;)

(B1) MR_fanny: I had a look at the Ryco part numbers and its not the same as the GTS-t. They run Z200/201/202 (or something) but the GT-R is listed as completely different. Sorry for not being specific, I CBF'ed finding the Ryco listing :(

pkblade: Given the Ryco part numbers are different, are you sure about that?

LW.

Link to comment
https://www.sau.com.au/forums/topic/71633-fuel-filters/#findComment-1322395
Share on other sites

Given the Ryco part numbers are different, are you sure about that?
Im 100% sure.

According to the Ryco listing Cubes provided :) the 16400-53J10 is the equivalent to the z387, which also, can be used on all RB20's, RB25's (no mention of the Neo), & RB26's.

Link to comment
https://www.sau.com.au/forums/topic/71633-fuel-filters/#findComment-1322849
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bummer...yeah i "need" something to "ease" up the work and for my driving it would be enough.    Iam counting the tune "without" turbo. I do not mean "cheap" like something from Temu around 200 USD, "Cheap" is something around 1000 USD? 
    • Starter motors used to use the weight of metal (magnets) to provide torque. Now they use (more) current instead. This. It's completely normal.
    • So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
    • OK, few more things sorted and it is ready for a shakedown on 10-Oct, with one weird thing. Changed the run in oil and filter for the good stuff. 8l came out, about 8.5 went in with filter so that looks all good. Changed the starter (again), this time for a brand new one, works good. Interesting that the Taaaarks one is shorter than factory but spins harder, I guess electronics have moved on a little in the last 30 years. Will be nice to have a bit of extra space under there. Put the timing cover back on, and noted where the cam gears were set as a record.  Will need to double check the timing but it is pretty close. Also put the coil pack cover and intake snorkel back on. Exhaust Inlet Changed the water out for coolant, bled up nicely. Removed the rear brake pads (well worn factory sumitomo ones!), gave the hardware a good clean and reassembled. I've put bendix XP on the back again because the price is excellent at $150 a set and they worked well on the V37. Front pads have plenty so no issue there
×
×
  • Create New...