Jump to content
SAU Community

Recommended Posts

Does an rb30 bottom end with rb30 crank bolt straight onto an rb25 head?

Im thinkink of strengthening my bootom end as i am about to put a larger turbo in my car.

Does anyone have some feedback on doing this and also is a ihi apexi rx6 turbo a good upgrade for a gts. I can get a brand new one pretty cheap!!

Link to comment
https://www.sau.com.au/forums/topic/7267-rb30-bottom-end/
Share on other sites

confak,

I'm pretty sure that it does bolt straight on, but that the oil and water galleries need to be moved. I'm sure someone out there knows for sure. The RB30 won't strenthen the bottom end just by putting it on, you'll have to look at doing things to the crank, pistons and conrods to make it tough. The extra 1/2 litre will make a larger turbo more responsive though.

Remember the RB30 was only put into shit cars, VL Turbo etc, so I can't believe that the bottom end will be too stronger, but I haven't tried it.

See'ya

:burnout:

Link to comment
https://www.sau.com.au/forums/topic/7267-rb30-bottom-end/#findComment-107052
Share on other sites

Originally posted by GTS-t VSPEC

Remember the RB30 was only put into shit cars, VL Turbo etc, so I can't believe that the bottom end will be too stronger, but I haven't tried it.

[cough] say what ?!? - the RB30 is used in Oz spec R31 Skylines and Nissan MQ Patrol's. Holden bought the RB30 to put in the VL when they realised the 202 (read: boat anchor) couldn't cut it with unleaded fuel. The bottom end of the RB30 is as strong as any of the RB series.

As for the RB25 head, the non-VCT head bolts straight to the RB30 block without mods, but the VCT head requires oil gallery mods.

Link to comment
https://www.sau.com.au/forums/topic/7267-rb30-bottom-end/#findComment-107174
Share on other sites

only put into shit cars eh. do i detect someone thats been chopped by VL turbos?

R31 = shit car apparently.

SteveL is correct about the non VCT head. This head is found on R32 RB25DE engines (possibly other engines but I dont know)

RB30 bottom end strength: from what i've read the standard bottom end is used regularly in larger hp applications.

Link to comment
https://www.sau.com.au/forums/topic/7267-rb30-bottom-end/#findComment-107207
Share on other sites

As well as bolting the head on, you need to modify the cambelt idler / tensioner, and you need to modify the ignition system (RB25 runs coil packs). And you need a R33 ECU to run the coil packs.

email the boys at Zoom! ([email protected]) and ask them which issue covered this conversion.

Link to comment
https://www.sau.com.au/forums/topic/7267-rb30-bottom-end/#findComment-107328
Share on other sites

Now we've started a stupid argument...

Anybody done 400,000km in their RB25 yet ? Hmmmm...when u do let me know, but there are still plenty of R31's driving around that have done that many km using an RB30 engine.

There is a guy on the www.r31skylineclub.com who has a 323kw/rw RB30 turbo (its actually being sold now for 13k - see http://nissanking.cjb.net/).

You might want to check out the r31forums there for some advice, as there are plenty of people who've put Turbo top ends on their RB30's

Link to comment
https://www.sau.com.au/forums/topic/7267-rb30-bottom-end/#findComment-108715
Share on other sites

ok from the research Ihave done.

unless your going for mega power forget the rb 25/30 unless you can do all the work your self.

the rb26 crank and rods fit in the rb25 and get some forged pistons if you want to run serious boost or just use forgies on the stock bottom end.

con b4 you do any thing fit the rx6 turbo but make sure its suitable for the rb25 and yes they are very good turbos.

get a power fc z32 afm and bigger injectors merli is making 280 rwkw on a stock bottom end rb25 so you can and when it blows then fix it strong but it could last for ages. If tuned welkl and looked after

meggala

Link to comment
https://www.sau.com.au/forums/topic/7267-rb30-bottom-end/#findComment-108745
Share on other sites

  • 1 month later...

ricknismo,

http://www.r31skylineclub.com/content/articles

Has a artical on a twincam conversion!

http://home.iprimus.com.au/cobra30/twincam.htm

Is another site detailing the conversion! Costs is also included in this one and it goes into much better explanation on using the non VCT head!

MEGA

Link to comment
https://www.sau.com.au/forums/topic/7267-rb30-bottom-end/#findComment-147590
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...