Jump to content
SAU Community

Recommended Posts

umm Jamezilla, if ur in melbourne, theres no need to get one from that ebbro site. i've bought a R34 calsonic GTR for around $40 from Big W. For more variety u can get the same thing at the hobby shop on lonsdale st. costs you from $50 - $60. still cheaper than $70.

Turtle:

Thanks - will have to pop in next time I am in the city.

Was there a couple of months back looking at RC cars - keen for a gas powered one, but not sure I want a race-track only one :

I have got quite a few

you can buy die-cast 1:18 scale R34's from most hobby shops, as well as plastic kits. Diecast stuff is usually $80+ and the plastic kits can be had for about $30.

i currently have 5 group A 1:18 R32's, 2 1:18 R34's, 1 1:12 (huge) palstic 32 GTR and about 10 smaller palstic skylines, great fun, and they look good - they are also cheaper than the real thng

Best place to try is your local hobby store, or ebay

Guest GR33DyMANGO

yer as the other guys (and gals:) ) have already mentioned, going down to your local hobby shop or even target/kmart etc.. will be the best and easiest way to get model skylines.

im pretty sure you can even get a tamiya remote control r34 (more likely from a hobby shop). you can just buy the kit without the remote which would be pretty awesome, not to mention how much fun putting together a model car is, especially a remote control car.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's awesome. Fully serviced/full log book history for one of those cars is super rare from what I know. With JDM's like Skyline's, Supras, are quite hard to find one with full log book history. S15's seem to be somewhat of an exception, at least the spec s australian delivered models.
    • Hey all, It's been a bit since I have been able to update.  I pulled the fuel pump, first off it was a "universal" pump and the strainer was very clogged, and it was folded over on itself.  I replaced the fuel pump and all is well....  No more stalling.
    • That's convinced me I'll bump up the G30-660 to 770   Any idea if the difference in boost pressure? Cheers
    • When: Saturday 24th of May 2025 - All day Where: Sydney Dragway, Eastern Creek Cost: Varies - Book direct with the GTR Festival Website We will be there on the day with a stand please reach out via our interest form if you wish to help out with the stand. Limited parking will be available in the display area, first in first served with current members getting priority, please register your interest with the link above also. Please post any great photos you take on the day on this thread and we will try use some in our e-mails/website/social media
    • Hey guys so turns out this project is going to be much bigger than I thought haha but I've done some my homework and have done a few panels on my car, but one part I can just not visualise is this. If I do a spot repair and I put filler in a dent for example and sand outside of the repair with 320 grit lets say so the primer can stick as I will only put primer on that repair and the surrounding area and then repaint the whole panel. Don't I need to make sure that I don't put primer on the old clear coat? I keep seeing YouTube videos where people have new paint and primer land on the old clearcoat that isn't even dulled down, it's still shiny. I thought putting paint on clearcoat or primer on clearcoat is a bad idea because it won't stick. So in this scenario it's a bit different to mine but imagine someone doing a spot repair and only painting that small section of repair but the new paint is landing on the old clearcoat. What am I missing?
×
×
  • Create New...