Jump to content
SAU Community

Recommended Posts

  • Replies 321
  • Created
  • Last Reply

Top Posters In This Topic

off topic: has anyone turboed or supercharged the 6liter?

i still get amazed when i see the "6 liter" thing!

steve

Not much is available in australia for the Ls2 yet. LS1 has been out for awhile so you can get a lot of mods for them and APS have twin turbo kits for the LS1.

LS2 edit is still being tested before release and is very anticipated.

Hi guys,

I currently own a 6 litre HSV and I am interested to get some opinions from the majority of skyline gtst and gtr owners. My question is, if you were stuck at a traffic light and a 6 litre HSV was about to drag you, do you think you will win? If so, by how much?

If not, what mods do you think you will need in order for the race to be close? Also how much power will the mods give you?

For those who don't know much about the 6 litre holden. Here are the specs:

* 297kw

* 1690kg

* 5.1(auto) 5.2(manual) 0-100:manufacturers time.

I would expect a few to say the following so I'll type it before they do:

1)Holdens are crap etc etc

2)Holdens are slow etc etc.

3)Why buy a holden etc etc.

4)GTR's rock and will leave anything for dead.

5)Why spend 60K+ on a car when you can buy something 1/3 of the price, mod it and have a rocket.

6)I am not a stereo typical v8 driving bogun. I do eat rice and last ride was a S15.

7)holdens look crap

8)holdens are too heavy

This thread is not an attempt to mock either skylines or holdens but to see what mods/power levels a skyline will need to have a close race with a 6litre holden. Also to see if there is in fact any respect from the majority of skyline owners for the holden.

I always was a holden man until I discoved value for money import the nissan skyline. My mate has a VX R8 clubsport beautiful great for road trips and goes pretty good cant beet that V8 sound.

Weighed my car on a weigh bridge the otherday 1380kg with nearly half a talk of fuel.

I have 195 rwkw mods are in sig. That is about 265 kw at the engine and it has a nice tourquey power curve (not the same as a 6.0 V8 would though).

Im guessing you would have arround 220rwkw (thats what I saw a 300kw vtgts make in wheels magazine).

1690 / 297 = 5.7 kg per kw

1380 /265 = 5.2 kg per kw

R33 gtsts with similar power to mine will do low 13's some will do high 12's depending on suspention tyres ect. I think id win but it would be close the weight factor really doesnt help the later model ford/holdens. But like the imports they repond well to modifications so add an exhaust ect then it may be a different story

Go to a tune and test day at the drags. It's the only way to prove it.  

Im sure the HSV could beat a gtst with 200rwkw+ at the drags if it had rock hard, low suspention, 18" wheels, and cheep rubber power is only part of the equation remember.

Just watched a Jeremony Clarkson DVD put a Pagani Zonda V12 with 555bhp against a 1992 XJ220 Jag with a 540bhp turbo V6  AND an extra 200kg.  

The Jag ate the Zonda.

Is that in a drag or arround a race race track?

Not much is available in australia for the Ls2 yet. LS1 has been out for awhile so you can get a lot of mods for them and APS have twin turbo kits for the LS1.

LS2 edit is still being tested before release and is very anticipated.

I was recently in the states and had the joy of seeing the New York Motor Show. Now the GTO (read Monaro) over there has been using the LS2 for a while.

There are a number of peformance places with exceptional knowledge to provide you with some info and parts.

Firstly, try

www.summitracing.com

Also, good to see a "car enthusiast" not bagging but appreciating. I had a run with a 300kw HSV at Willowbank some months back (yes the old LS1 oil burner) and he had me by only a bit.

I am stock except for rebuild, zorst and pod , running stock boost, so a modded one with boost, and a decent driver would make an interesing comparison.

Go to the drags and test the theory is all I can say!!! :)

I always was a holden man until I discoved value for money import the nissan skyline. My mate has a VX R8 clubsport beautiful great for road trips and goes pretty good cant beet that V8 sound.

Weighed my car on a weigh bridge the otherday 1380kg with nearly half a talk of fuel.  

I have 195 rwkw mods are in sig. That  is about 265 kw at the engine and it has a nice tourquey power curve (not the same as a 6.0 V8 would though).

Im guessing you would have arround 220rwkw (thats what I saw a 300kw vtgts make in wheels magazine).  

1690 / 297 = 5.7 kg per kw

1380 /265 = 5.2 kg per kw

R33 gtsts with similar power to mine will do low 13's some will do high 12's depending on suspention tyres ect. I think id win but it would be close the weight factor really doesnt help the later model ford/holdens. But like the imports they repond well to modifications so add an exhaust ect then it may be a different story

I dynoed my car last month and got 240rwkw. MOTOR got 229rwkw. As for the VT GTS, isn't that only 220kw at the flywheel? It's the VX GTS and later that have the 300kw calloway motor.

So is it safe to say that a gtst with >190rwkw will be a good match?

1) I think a gtst with 230-250 rwkw is a bit more than "average" for a gtst

Agreed. The "average" GTST would be under 200rwkw. The "average" GTST I think would be around 230-250 kw @ the fly.

As long as that 6L HSV can get traction it should win a lot of drags. Do some weight reduction and it's even more formiddable.

If you read motor I thought the quickest car they tested was the XR8 at 13.99????  Is the Aussie muscle car shoot out.

As for getting more power all you need to do is get the LS2 flash tuned

I have that issue of motor where it tested allt he aussie cars.

hsv got 13.65 in that test.

Yes we are waiting for the LS2 edit(flash) but it is in the testing process and has not been officially released.

I dynoed my car last month and got 240rwkw. MOTOR got 229rwkw. As for the VT GTS, isn't that only 220kw at the flywheel? It's the VX GTS and later that have the 300kw calloway motor.

So is it safe to say that a gtst with >190rwkw will be a good match?

240rwkw thats impressive. Are you able to post us the graph?

Vt gts series 2 had the 300kw callaway engine. I have the mag at home I will check it tonight it is actually up against a R34 GTR in a head to head comparision and has all the facts and figures and a dyno run on each car.

Series 1 vt gts was 220 at the fly blueprint edition was 230.

Defently a good match if a r33 gtst has under 190rwkw.

240rwkw thats impressive. Are you able to post us the graph?  

Vt gts series 2 had the 300kw callaway engine. I have the mag at home I will check it tonight it is actually up against a R34 GTR in a head to head comparision and has all the facts and figures and a dyno run on each car.  

Series 1 vt gts was 220 at the fly blueprint edition was 230.

Defently a good match if a r33 gtst has under 190rwkw.

Don't you mean 'over' 190rwkw. hehehe

Here's the graph.

ls2dyno2.jpg

I love my skyline.

But I wouldn't mind getting the R8 LS2 especiailly the upcoming one with the track pack (smaller but wider 18" wheels, track spec rubber). Why? Because, in its current form the Commodore SS beats the R8 around Eastern Creek by about 0.4 of a second. Still the R8 clocks a 1:55.96 at the creek. That's truly impressive.

I would still keep the R34 and I'll have the best of both worlds...literally

I know you don't wanna hear about GTR's, but really, if you are going to compare stock, as is fair... the stock GTR's go under 13s 1/4 and you saying the fastest HSV is 0.6 seconds slower... thats alot of distance when you are going that fast.

From the lights however, its going to come down to traction and lag. We win on traction, you win with less lag(in a big way).

at the end of the day... you DEFINATLY win on sound!!! and thats what the crowd wants. :jump:

Vuster: Did you ever track your S15? How do you find the HSV handles compared to the S15?

S15 was definitely a small fun car. Turning at the traffic lights i was able to hit full throttle and it would grip the road like a cat on carpet. I don't dare to push my current ride around corners. Last thing I want to do is wrap a 60K car around a poll. It does feel heavy.

As for straight line, my current ride will take it on easily. I got tired of always having to rev the S15 hard at the lights for it to go otherwise even a v6 would go past me without trying. That's something that I really didn't like. The fact that there was too much lag when you weren't in the mood to push the pedal hard.

The v8 is very torquey so driving it is very easy, very effortless as you just press the pedal softly and it moves. Oh and in the wet I don't need to worry about losing traction as much. The s15 would lose traction too easily so I had to drive like a granny. I just leave the traction control on in the hsv.

I only switched cars because of my lifestyle. I need to tow a boat and like to get away with a full load often.

Here's a in car footage of my car doing a 0-100km/h sprint.

http://users.tpg.com.au/mcurro/clips/5.4_seconds.WMV

Always good to see someone looking at the positives and enjoying a good discussion. The turbos can be a bit edgy in the wet with their boost response.

From last years HSV track day at PI, at which I had a ball regardless of blowing a turbo hose and torching the bumper, we found that there was a pretty close match between similarly modded 33/34 GTSt on standard road rubber and HSV's on semi comp. Just the weight was a killer for the big guys in the corners but as the road rubber went off with heat, the track rubber just got better :D (dammit)

Surprisingly I have seen auto V8 Soarers doing similar times to the HSV's with just exhaust and track rubber and a new trans controller. Now that is a sweet sounding engine and I'm just in the process of getting headers then the rest of the system as long as the missus doesn't catch me :)

Sounds like a great ride and fit for purpose towing and hauling family in comfort, but don't write off taking it to the island for a squirt.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
×
×
  • Create New...