Jump to content
SAU Community

Recommended Posts

hello all,

seen a number of group buys on this site with copy intercoolers, prices lingering around $250 mark (give or take $50). just after peoples opinions on these things? i wouldnt have a clue really about them, but would it be better then a stock intercooler?

at the moment my r32 gtst has pod and exhaust and id be looking to get an rb25 turbo+bleed valve to 14'ish psi, and obviously am going to beed an intercooler. i wouldnt be going much further then that in the way of modding the car.. so would one of these coolers suffice?

obviously id like my moneys worth, but im not keen on spending $1k+ on a top of the range intercooler made for 400hp+ that im never going to push to its limits..

cheers!

shaun.

these intercoolers are great. I had one on my cefiro pushing 1.2 bar during drift days and intake temps never went over 35~40.

with the previous cooler i had (almost same size as the hybrid copy) it got up to 55!!

Keep in mind. those coolers are huge! you will need to mod your front bar to fit but its deff worth the while

I have a hybrid copy - 600x300x76 and have had no problems.

My car span up 200kw on the mercury dyno the other day and inlet temp was at 33 degrees, so the performance of the cooler seems fine

i got a hybird copy aka china cooler 600x300x76, had no problems with it so far, i am running 12psi without a problem. I have been reading thou that the only problem with the hybird china cooler is that the endtanks are not as good as something like a gtr cooler

they're all made in china to pretty much the same standard. As long as you don't get one with a dodgy weld (which you should be able to fix pretty easily anyways) you're good. Intercoolers have been around since 1970, its not brain science, so a dodgy copy would be 99% as good as a big brand one.

they're all made in china to pretty much the same standard. As long as you don't get one with a dodgy weld (which you should be able to fix pretty easily anyways) you're good. Intercoolers have been around since 1970, its not brain science, so a dodgy copy would be 99% as good as a big brand one.

Yep I agree.

I run chinese hybrid copy 76x300x600 as in my avatar. My temperature is never above 40 degrees usually 2-3 degrees above ambiant. Doesnt leak and flows extremely well. I wont even change it cause really its very very good and I reckon 300rwkw will be easy with it. I making 230rwkw and the cooler is not one bit stressed thermally.

DO yourself a favour and get one. I got mine for $310. Ive seen them in the 200s or the 500s lol!

All intercoolers are not the same and don't kid yourself that they are made in the same factory.

just take a TRUST core and then compare it to a Cheap Hybrid and then compare it with one of the best, an ARC job.

They are no the same.

yes they do a good job at lower power figures, up to 500hp or so.

I've got a cheap chinese one on my golf which makes 210FWKW and then we have a TRUST on on the GTR.They are both 600x300 and thats were the similarity end.

Even though I have just installed a cheap version myself.. I'd tend to agree with you 600hp. I'd like to hear some comments from people running 400hp+ and/or high boost levels and whether they still think they are that good.

My view is that it's just a way to get a cheap intercooler and keep intake temps down enough until it becomes a weakness. Then you upgrade it again, just like anything else.

the comparison here isn't between top of the range abd knock offs, its between hybrid and hybrid copies (or so I assumed). At this range of the market the differences are minimal, and the namesake isn't worth the hundred's extra.

I have a brand name larger cooler on my car, and my bro has a hybrid copy of similar size.. with similar boost and mods (before the new turbo) there didn't seem to be a lot in it.

I imagine once you start pushing big power it matters, and that slightly better design may shine or something. But I can't see how it could be $1000 better :)

Not much in it between Hybrid and the copies... but say Trust or even better Apexi coolers, then you will start to see a difference. This is obviously more noticable when running more power. A standard old r32 GTR cooler will flow better than a new Hybrid one from what ive seen!

I've seen a car with a hybrid cooler at 250kw at the wheels go to 270 at the wheels,with a cooler from Performance Manufacturing at Tarin Point.

very nice bit of gear.

same settings nothing changed at all!

Just to be sure were they both the same size coolers (as hybrids come in different sizes).

The chinese ones also come in 100x600x300. Im sure this has to flow good hp. As for big name brands vs chinese ones...havent seen a comparison. All I know is that I had a jap one on my car, changed to chinese one and made an extra 30hp at the same boost setting blah blah. Still, I think that trust and the like have to make good products...but I would love to see a comparison of the intercooler I mentioned above and all these other expensive coolers, I reckon the difference would be very very minimal under 400rwkW. Ofcourse for anything above this, I dont think you can buy chinese 6" thick coolers like trust make so cant compare here and yeah you can only conclude that for high hp only the name brands are the go. There is not enough demand for 1000hp chinese coolers so they are not made. Could be wrong. I just would love to see a back to back test for interests sake.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...