Jump to content
SAU Community

Recommended Posts

OK guys, i've been given an oppurtunity to get what i think is a pretty cheap RB31DET bottom end (block).

What i'm asking is the maximum any of you guys would pay for this, here are the specs:

-VL RB30 NA Block, deck has been honed and the bores have been made 20 thou oversize for the bigger pistons (3.1Litre)

-Hypa-tech pistons brand new and 20 thou over size (makes it a 3060cc I believe) Their semi-forged and ceramic coated

-Rods are standard but have been shot peened and balanced to make them all the same weight etc.

-Crank is standard but has been ground and balanced.

-Block has been grub screwed for strength.

-Has all new Welch plugs etc and all new bearings

-All the oil and water galleries have been cleaned and the oil galleries have been modified for better use for turbo's? (not sure on that one either)

-ALL it needs is an oil pump, water pump, sump and head obviously which i already have to complete the bottom end, everything is together and has all been done by a reputable engine builder here in Adelaide.

So my question is how much would you pay and any other comments are more than welcome!

theres about $700 worth of machining in preping a new engine on a rb30, and buy the sounds of it around $700 in parts assuming they are only standard type pistons... So I wouldn't pay much more than $1200.

they will be standard cast pistons, only new. grub screws in the crank are for the rod lubricating oil journals on the big end, nissan drilled big long holes to connect them and then bashed aluminium plugs in there to plug em up so oil wouldn't leak out (duh) and lose pressure. after a lot of k's they can become loose so you drill em out, tap it and put a 1/4" grub screw in there. stake it and you're done!

it sounds exactly the same as my block, you're looking at $500-$700 of prep work by a machine shop and up to a grand again for rebuild parts (rings, bearings, pistons, seals etc) so i wouldn't pay more than $1300 for it.

thanks guys. thats what i wanted to hear. the guy has offered me it for $750 so i'm going to go pick it up Tuesday

And by the way the pistons are 'HYPER TECH'

think i've heard of them before!

There is a brand of pistons called Hypatec, they are hypereutectic pistons made by Right Way Piston Co. in Taiwan. theyre a nice piston but from what I know they dont make anything forged for the RB. There is a Hypatec liquid forged piston that is excellent but not available from what I know for an RB engine at all. They are made by pouring the liquid alloy into the die and forging it once it starts to solidify. This is the same way that Toyotas forged pistons are made and when you see some 1000hp-ish 2jz's they are awfully strong.

I've seen coated pistons for the RB30ET but not for the n/a engine. It's actually an anodising they use. Be careful if it has a slightly dished piston rather than a dome as you will have way to low compression.

It is a good buy, just depends if it fits your needs.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...