Jump to content
SAU Community

Recommended Posts

Hey im bored and got money so i have decided to sell my 32 n1's turbos for a nre b/b set of either 34 n1's or something else prob is what is something else im looking for something that will bolt on the factory ppostion but if i dont go for the 34 n1's something that will make more power, not to worried about lag so i was considering maybe 2540,s with a set of cams would this be wise...

and question how much are 32 n1's worth these days..

A/r 60 steel wheels

Link to comment
https://www.sau.com.au/forums/topic/77419-32-gtr-turbo-selection/
Share on other sites

I'm doing something different......mainly due to a few people getting pinged for import duty on Turbos thru Nengun and the like atm.

Anywho I'm getting my standard turbos rebuilt using Steel T28 Wheels, and having the Housing Machined, costs just over $1000ea to perform....should see 600fwHP which is probably 100hp more than i'll ever use :)

Did the same thing to my old 'VLT T3' was good for almost 400rwHP, and is still going strong after 2+years.

I will post results when complete

I got my GTSS through nengun! and a whole stack of parts... no duty or GST!

I wouldn't go running around advertising that fact. Regardless, you have to at least budget for the possibility when buying from Japan (US is a different story post free trade agreement).

I wouldn't choose the GT-SS's if your after more power than the N1s. I would choose at least the 2530s. 2540s = a mismatched turbo, so avoid (do a search for more info).

Lucien.

Is it possible to see a modified version of that graph with rpm instead of speed ?  I'm interested in the response of the 2530's but I'm not sure about the GTR gearing.

Dyno's charts are done in either 3rd or4th gear which is 21.9km/h per 1000rpm & 28.5 km/h per 1000rpm respectively.

The larger 0.6 AR front N1's are good for more top end power. I have the plain bearing group A's and at only 13.8 psi they can make around 400hp at the treads easy with cams (I have detuned my engine for a safe 370rwhp). If you wack the boost up to 20 psi with a better intercooler you could see as much as 500+rwhp. At those levels your engine needs to be made stronger and even before that an oil cooler is nice to have.

I'm running 700cc sard injectors, cams are tomei 260's and standard airflow meters. The Standard airflow meters run out of resolution over 400rwhp and it's easier to tune with something bigger like the Rb20/25's and they are a straight plug in. If you are shooting for more than 500 then Z32's are the shot. If you have the 0.6AR front N1's you should be able to get more out of it with bigger cams.

i'm running the gt2560r garret 320hp (r34n1) they have 0.60ar compressor and 0.64ar turbine housing and with pfc ,z32afm ,700cc sard injectors and poncams i make 529.4rwhp at 20psi .The gt2560r are very similar to 2530hks with the same turbine but has a differnet compressor ( i my opinion an awesome turbo combo for the gtr).

The 2530 hks is also an excellent unit also.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...