Jump to content
SAU Community

Recommended Posts

ok really pissed atm havnt driven car since it has been choking frequently.. now that i have installed a bosch 040.. i couldnt even get out of my street it just kept jabbing itself and all this smoke was coming out of the exhaust and then idling up and down as if about to stall..

now i had this probelm already but not as bad so im thinking i installed the fuel pump wrong?.. cud that be the case?. the positive and negative terminals on the pump.. i have just put wire over the terminal and solderd it on. should that be ok?...

if it isnt my fuel pump what else could it be?. thanks

Link to comment
https://www.sau.com.au/forums/topic/78293-car-is-stuffed/
Share on other sites

yeah i tried that already. ive got a z32 afm. however i cant put it in yet cuz i dont have the commander for my power FC to change the afm option... would it still work properly if i changed my afm to the new z32 without changing the option on the FC?

Link to comment
https://www.sau.com.au/forums/topic/78293-car-is-stuffed/#findComment-1429596
Share on other sites

I noticed a few people mention air flow meter and cleaning it.......what does it mean when your car keeps leaking oil into the AFM in a GTST.......my cousins R32 GTST has this problem, it starts, but wouldn't move or rev well, AFM had oil in it.........

ANother thing i noticed, how bloody heavy are the GTST bonets!

Link to comment
https://www.sau.com.au/forums/topic/78293-car-is-stuffed/#findComment-1429756
Share on other sites

I had this problem on the last 2 PFC's i had.  I found if i went to the AFM settings and changed it to another AFM and change it back or even just go into the settings fixed the problem.

Agreed, I'd bet if you put a Commander on it, or Datalogit, you'll find it's got the wrong AFM setting. I had the PowerFC out of mine while doing some mods. On reinstalling it I found it had "defaulted" to another AFM setting... Damned odd.

Link to comment
https://www.sau.com.au/forums/topic/78293-car-is-stuffed/#findComment-1431388
Share on other sites

OK. took the car to UAS and yeah they fixed up my problem! (fuel pump install + spark plugs fouled)

anyways i still have one problem tho. now the misfire thing i had would just happen anytime the car felt like it (happned 4 times tonight) and then the next stop/slow down the idle would jus go retarded and stall. it would drop all the way to 0rpm and come back to 1000rpm then stall. going to give UAS a call tomo but i think theyre closed on sundays. so any help would be good! thanks

Link to comment
https://www.sau.com.au/forums/topic/78293-car-is-stuffed/#findComment-1443642
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...