Jump to content
SAU Community

Recommended Posts

Hey guys...

I currently own an eb falcon I6, and was looking into purchasing a r32 gtst (seeing as i cant afford a xr6turbo ba), and was reading through some posts on here and was amazed at you guys considering a gt35/40 turbo big? The stock ba xr6t runs this (please i am not mocking im jus interested), the falcon runs a 4 litre i know but an rb30 is alot more high tech then the falcon (even older falcons like mine are running lot bigger turbos with full boost at 3000ish), there shouldnt be such a problem with spooling times on these engines.... Anyways how much should i be looking at spending on a good condition r32 gtst. Im looking for mid 12second quater pass while normal street drivability, how much in mods (i want a really reliable car too) should i be looking at and more important WHAT mods would i be looking at id really like to show my mate (in the turbo falcon) how its done again.....Thanks guys

Link to comment
https://www.sau.com.au/forums/topic/80928-curious-about-a-r32-gtst/
Share on other sites

Comon guys somebody gotta know how much it'd cost to get a r32 gtst into the 12s and be reliable...

noone can give you an exact price, as prices vary everywhere you go, and vary depending on the condition of your vehicle and its weak points and strengths. It also depends on how you chose to go about your tuning and modification.

Comon guys somebody gotta know how much it'd cost to get a r32 gtst into the 12s and be reliable...

Hi 12's or lows 12's?

If you want low to mid 12's youd be up for at least 5 -10 grand on mods i think maybe more. My opinion, get rid of the RB20 and out in an RB30/25 hybrid. I think it would work out cheaper than working the tits off the RB20, your decision. There is a thread on how to do this (R33 RB30 Conversion), i am currently sourcing parts for mine now.

Comon guys somebody gotta know how much it'd cost to get a r32 gtst into the 12s and be reliable...

if times are your only consideration, buy a pre-modded R32GTSt and go from there

otherwise the cost won't be worth it

the strengths of the R32 aren't its quartermile times. take one for a drive through some corners, and give the brakes some workout... compared to your falcon (and the BA) and you will be amazed at the braking and handling...

oh, and the difference between a 2L engine and a 4L engine is that its double the size... that's double hte exhaust gas to spool up a turbo. Thus you can expect that a fair sized turbo on a 4L will be large on a 2L.

Its like getting a truck turbo off an 8L engine and bolting it to a BA XR6T... it will be laggy as a mofo. why? its half the capacity...

Warren.

Or buy my car for 22K:) Instant 12s:)

Its prtty easy to get 12s out of a GTST, but its never cheap. The following prices are isntalled prices:

- Intercooler , $1500

- Full exhaust, $1500

- Clutch and flywheel $1200

- GTR injectors, $300

- Pfc and tuning $2000

- Filter and fuel pump $500

- Rear bushes and alignment $200

- Turbo setup. $4,500

- Tyres $800

All bolted to a std Rb20 should see you supporting between 220-250rwkws and doing guaranteed 12.9s and lower. If i can do a 12.9 with a high 2.2, almost 2.3 60ft then a 12.3 is easily on the cards, especially since the car can run 115mph.

Of course if you can pick up a car with the exhaust, intercooler and susp already then you save yourself a nucket of money. And of course you can get the above gear cheaper, and install yourself to almost half the cost, but thhe above prices are more the norm for good gear

This is the fastest R32 gtst that I could see the the SAU timeslip database, and this only just cracks a 12:

http://www.skylinesaustralia.com/forums/me...ails&userid=462

And here it is for sale:

http://www.skylinesaustralia.com/forums/sh...ead.php?t=68602

IMO if you want to run that time and you want a reliable driver, then this is the sort of thing i'd be looking for. You could spend a lot more than the $20k that Roy is asking getting to this point.

EDIT: And Roy beat me to it :thumbsup:

LOL..i often wondered that drag info went to, now i know.:thumbsup:

The 60ft time wasnt as bad as i thought. The car can do consistant 13.2s all day with walking the car off the line, grabbing 2nd then getting stuck into it. Usually a 2.4 60ft:(

It shows that the 12.9 was the quickest because that was my best 60ft time, but it wasnt my best mph.

Having listened to ppls words of caution and reservations about gearboxes...im now confident that they are fine at this power level. R31_Nismoid gave a 20 box a pasting with more power then me behind an RB25 for a good while, mine is still fine. Cubes is running one behind his RB30 making 170rwkws, but typically its the torque that hurts them so if its happy behind the 3.0L:)

So before i part with the car im going to give it another go at the drags...i cant even remember if i was running 15 or 18psi...either way if i leave the line with 5,000rpm with the new RE55S and dont granny 2nd gear, then i will be amazed if i dont easily improve on the 12.9

... time to prove it :thumbsup:

LOL...this is a discussion forum..so i dont have to prove anything :Pimp2:

... i dont care about having the fastest car...i list all the dramas and info not to be making excuses, but to give others an idea of how their car would be quicker if they addressed some of the shortcomings of my car... lol does that make sense?

It will be up to the next owner to enjoy the car..if he/she cars about proving the car still has a fair bit in it then cool...otherwise it is what it is.

lol i wanna open an R32 shop, like R31 House in Japan. Once you get your head around the R32 GTST they are pretty quick cars if you know where to spend the money:)

yo roy

i'll be down at the SAU NSW drag day 31st July to see what time the r32 gtst can with a 2530 and support gear. Not making as much power as you Roy but hoping for a flat 13.....maybe abit optimistic. :P

Will good to compare numbers with your setup.

Cheers

... i dont care about having the fastest car...i list all the dramas and info not to be making excuses, but to give others an idea of how their car would be quicker if they addressed some of the shortcomings of my car... lol does that make sense?

hehe, wasn't that serious - just curious myself as to what is possible. Somebody here should be able to get a mid-12 from a stock internal RB20.. afterall buzz-box powered SR20 and CA18 powered dattos are getting mid to high 11's... and they weigh about 400-500kg lighter

lol i wanna open an R32 shop, like R31 House in Japan. Once you get your head around the R32 GTST they are pretty quick cars if you know where to spend the money

:uh-huh:

a 12 second R32 GTS-t wouldn't exactly street "driveable" off boost...the turbo lag would suck hard...RB25/26/30 transplant would be the most cost effective mod IMO.

LOL...i know im not going to convince you otherwise, but you would be amazed just how driveable they are...a few SAU guys and gals have driven my car when im under the weather and none of them have seemed to mind.

Sure its not as massivley responsive but...i dont recall who in NSW has driven it, perhaps beer_baron drove it???? Doughboy has, its very streetable off boost and has very good manners on the street!

Its no RB25 with 2530 but there is no way you can say its not streetable...that statement is way off the mark.:P

You would be surprised. R32_Bigboy didnt seem to mind too much putting around town in it and he is an RB30 groupie:)...i recall him being surprised how it drove...and he could be heard screaming "GATE IT" like a cast member of One Flew Over The Cuckoos Nest whislt he terrorised a small country town:)

So im a scratched record, if you want big torque and want to put around under 3,000rpm then go the RB30, but dont go around saying RB20s arent streetable...that is just an old wives tail...hell give me $2200 and i can show you an 11second RB20 that is streetable off boost:)

the falcon runs a 4 litre i know but an rb30 is alot more high tech then the falcon

I think you are mistaken thinking the R32 has a 3litre rb30e it infact has a 2 Litre Rb20det which indeed does make it need a smaller exhaust wheel hence smaller turbo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • also possibly backed up to my filler and shat down it! 🤣
    • Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...