Jump to content
SAU Community

Recommended Posts

That is right, you heard it first from the transport authority!!!

A little help required for a proper translation, but the jist of it is, I (I being hot J-girl) don't want to ride in a modified car!!!

That's right, Japan's approch to tackling the young male modified car poseur is to hit him where it hurts!

It says "I don't want to drive a car like that" on the right and "illegal modification is a menace/annoyance for everyone" on the left. Its a campaign to get rid of em entirely? hah... good luck.

so basically any non official recognition cars are being targetted? is this for modifications like rollcages and facelifts etc, or the really obvious ones like engine swaps which you need certification for anyways?

It'll be interesting the type of cars people sell when it comes to shakken time.

that is the main problem in japan as well as in australia.

its hard to distinguish d!ckheads with loud exhaust who hoons/bog laps/donuts and cause ruckus as opposed to car enthusiasts because to an outsider car is a car and loud exhaust is annoying...

each enthusiast needs to be extra careful not to piss the general public off to give ourselves the better image...

  • 2 weeks later...
correct me if im wrong, but you guys dont get defect over there for your cars appearance and noise that it produces yet we cop a spanking here.

you do have cops in japan that test your exhaust DB and CO output and ride height and issue you with a fine. They only do it if you're being an idiot though generally.

Yeah they could implement the '2 year Shaken' style roadworthyness schedule in Australia and tell the Police to concentrate on other (more important) things rather than defecting high and low... but would that be a preferrable situation?

You've got the 'in 2 years I will have to return my car to almost standard to get it past the RTA' senario (like Japan) or;

you've got the 'I'll drive my illegally modded car for as long as possible without attracting Police attention - and never have to comply to ADRs whatever if I'm lucky'...

Which is better? The Japanese senario has so many wide ranging ramifications such as loewering used car values, but at the same time creating a whole new industry where garages focus on periodic roadworthy certification. Which is good? Maybe not for the end user...

I remember a hooror story I was told years ago by one of my old students. She bought an EG Honda Civic for 100,000 yen off her uncle as a first car, but it only had 6 month or so to go on the shaken. The day came where she had to get her roadworthy check done and at the end of the day it cost her 150,000 yen in repairs. It's likely that she (as a woman) got ripped off badly by the garage doing the work, but even then the cost of shaken was the same as the total value of the car. It was a good EG Civic too. She couldn't sell it without shaken... well she could, but she'd get maybe half her money back, and then be without a car... lose/lose situation that she wished she never got involved in. Factor in car tax, parking fees, insurance etc and she's out of pocket big time.

Maybe the Aussie situation is better for the time being...

i agree, i think we have it ok.

Justin, a sort of related question is does anyone know what the big red line through a number plate means? I've seen this a couple of times on modified cars in japan and i am wondering if there is a connection? like it's a defect or similar?

Justin, a sort of related question is does anyone know what the big red line through a number plate means? I've seen this a couple of times on modified cars in japan and i am wondering if there is a connection? like it's a defect or similar?

That is just a trade plate for a workshop, just as in Australia they are abused to allow workshop staff to take unreg cars for a spin.

Where's the pic? ;)

Looks like the pic didn't survive the forum migration so here it is again.

post-662-1125100598.jpg

i agree, i think we have it ok.

Justin, a sort of related question is does anyone know what the big red line through a number plate means? I've seen this a couple of times on modified cars in japan and i am wondering if there is a connection? like it's a defect or similar?

Well there 2 types, one 'workshop' or 'trade' plates for dealers to use (different conditions of use) like g0jira said, and theres the usual '5 -day drive it to x location and nowhere else thank you very much ;)' plates like I've got on my Silvia when you de-register it:

post-4816-1125107555.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...