Jump to content
SAU Community

Recommended Posts

That is right, you heard it first from the transport authority!!!

A little help required for a proper translation, but the jist of it is, I (I being hot J-girl) don't want to ride in a modified car!!!

That's right, Japan's approch to tackling the young male modified car poseur is to hit him where it hurts!

It says "I don't want to drive a car like that" on the right and "illegal modification is a menace/annoyance for everyone" on the left. Its a campaign to get rid of em entirely? hah... good luck.

so basically any non official recognition cars are being targetted? is this for modifications like rollcages and facelifts etc, or the really obvious ones like engine swaps which you need certification for anyways?

It'll be interesting the type of cars people sell when it comes to shakken time.

that is the main problem in japan as well as in australia.

its hard to distinguish d!ckheads with loud exhaust who hoons/bog laps/donuts and cause ruckus as opposed to car enthusiasts because to an outsider car is a car and loud exhaust is annoying...

each enthusiast needs to be extra careful not to piss the general public off to give ourselves the better image...

  • 2 weeks later...
correct me if im wrong, but you guys dont get defect over there for your cars appearance and noise that it produces yet we cop a spanking here.

you do have cops in japan that test your exhaust DB and CO output and ride height and issue you with a fine. They only do it if you're being an idiot though generally.

Yeah they could implement the '2 year Shaken' style roadworthyness schedule in Australia and tell the Police to concentrate on other (more important) things rather than defecting high and low... but would that be a preferrable situation?

You've got the 'in 2 years I will have to return my car to almost standard to get it past the RTA' senario (like Japan) or;

you've got the 'I'll drive my illegally modded car for as long as possible without attracting Police attention - and never have to comply to ADRs whatever if I'm lucky'...

Which is better? The Japanese senario has so many wide ranging ramifications such as loewering used car values, but at the same time creating a whole new industry where garages focus on periodic roadworthy certification. Which is good? Maybe not for the end user...

I remember a hooror story I was told years ago by one of my old students. She bought an EG Honda Civic for 100,000 yen off her uncle as a first car, but it only had 6 month or so to go on the shaken. The day came where she had to get her roadworthy check done and at the end of the day it cost her 150,000 yen in repairs. It's likely that she (as a woman) got ripped off badly by the garage doing the work, but even then the cost of shaken was the same as the total value of the car. It was a good EG Civic too. She couldn't sell it without shaken... well she could, but she'd get maybe half her money back, and then be without a car... lose/lose situation that she wished she never got involved in. Factor in car tax, parking fees, insurance etc and she's out of pocket big time.

Maybe the Aussie situation is better for the time being...

i agree, i think we have it ok.

Justin, a sort of related question is does anyone know what the big red line through a number plate means? I've seen this a couple of times on modified cars in japan and i am wondering if there is a connection? like it's a defect or similar?

Justin, a sort of related question is does anyone know what the big red line through a number plate means? I've seen this a couple of times on modified cars in japan and i am wondering if there is a connection? like it's a defect or similar?

That is just a trade plate for a workshop, just as in Australia they are abused to allow workshop staff to take unreg cars for a spin.

Where's the pic? ;)

Looks like the pic didn't survive the forum migration so here it is again.

post-662-1125100598.jpg

i agree, i think we have it ok.

Justin, a sort of related question is does anyone know what the big red line through a number plate means? I've seen this a couple of times on modified cars in japan and i am wondering if there is a connection? like it's a defect or similar?

Well there 2 types, one 'workshop' or 'trade' plates for dealers to use (different conditions of use) like g0jira said, and theres the usual '5 -day drive it to x location and nowhere else thank you very much ;)' plates like I've got on my Silvia when you de-register it:

post-4816-1125107555.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...