Jump to content
SAU Community

Recommended Posts

Do the brake swap it takes so much hassle out of having to replace brake parts. R33 GTST Calipers all around and rotors, from what I here there is bugger all difference in going to Brembos in terms of braking performance as they are still only 4 pot and 2 pot and the piston sizes are almost equivalent to the sumitumo calipers. The major difference with Brembos is you can fit a larger disk on the fronts but if this is really an issue for you then Unique Auto Sports offer a large front disk conversioon kit for R33 GTST calipers which allows you to run a 350mm disk which is bigger than GTR brembos can run anyways. I think you can get this kit for around $700 which includes caliper brackets and new DBA rotors plus the price of calipers maybe a couple of hundred bucks from a wrecker. Anyways on a final note I have a full set of S2 Stagea Disks / calipers and pads sitting in my garage from my conversion they are still almost mint so if anyones interested then pm me.

So, ryan1600 would i be right in saying that 33 gtr and gtst calipers are the same? and if i were to buy the calipers and get some slotted rotors to suit, would they just be as easy as taking off my old rotors and calipers, then putting on new said calipers and rotors?

... i heard dba make gold slotted and dimpled rotors for 33's.... would look pretty sweet on my car :P (not to mention the braking upgrade)

So, ryan1600 would i be right in saying that 33 gtr and gtst calipers are the same? and if i were to buy the calipers and get some slotted rotors to suit, would they just be as easy as taking off my old rotors and calipers, then putting on new said calipers and rotors?

... i heard dba make gold slotted and dimpled rotors for 33's.... would look pretty sweet on my car :P (not to mention the braking upgrade)

i dont know...

s14, z32, R32 GTR and R33 GTST calipers are the same

R33 GTR calipers are Brembos

R34GTR are also Brembos

nah, Z32 front calipers are the same as R32 GTST. unsure of Z32 rears.

R32 GTR (non v-spec i believe) and R33 GTST are the same front. sumitumo calipers

R32 GTST, R32 GTR (non v-spec) and R33 GTST rears are the same.

R32 GTR V-specs are the Brembos, larger rotors.

all four spots fronts and 2 spot rears.

BKC34 have a read back a few pages. there is a few things mentioned that you need to alter to fit R33 calipers on.

Edited by QWK32

the best thing about the 32 gtr / 33 gtst brake setups are they

bolt straight on

much bigger than stock

cheap pads and plenty of choices

cheap discs dba/rda etc

setup around 500 to buy

It might cost more compared to a single replacement of pads and rotors for the standard stagea brakes, but by the time you get to the 2nd or 3rd change it will be much cheaper. and your car will stop much better in the meantime

the best thing about the 32 gtr / 33 gtst brake setups are they

bolt straight on

much bigger than stock

cheap pads and plenty of choices

cheap discs dba/rda etc

setup around 500 to buy

It might cost more compared to a single replacement of pads and rotors for the standard stagea brakes, but by the time you get to the 2nd or 3rd change it will be much cheaper. and your car will stop much better in the meantime

standard booster/master/lines okay?

yeah i used standard master, the 4 pistons are each much smaller than the 1 large standard one, I am not sure of the exact difference but I don't have a front/rear bias issues.

I re-used the front lines with the fitting inside the caliper removed - darrin covered this above. I also used the M12 bolts from 32 gtr with a small sleeve to match the 14mm diameter of the stagea hub. but that was it.

yeah i used standard master, the 4 pistons are each much smaller than the 1 large standard one, I am not sure of the exact difference but I don't have a front/rear bias issues.

Don't you mean '2' standard ones? The fronts are twin-sliding aren't they?

(It's late & I can't remember...)

Hmm wonder if R34GTS-T rotors have the right offset and could be machined down? Would be a bit of a waste of diameter... but they are now available in the RDA group buy :happy:

you could get a fair idea by pulling off one of your rotors and sizing it up. then go on the DBA website and start checking the sizing of the stagea rotor to some of the other nissan rotors, maybe even toyota or ford, some of them run the same PCD as nissan.

yep, fronts are twin, rear is single.

So if this is true, then wouldnt an upgrade of 33gtst/gtr calipers and slotted rotors on the front, and swapping your standard 2 pot front calipers onto the back with some slotted rotors, be a really good braking system upgrade, but for not a hell of a lot of money?

So if this is true, then wouldnt an upgrade of 33gtst/gtr calipers and slotted rotors on the front, and swapping your standard 2 pot front calipers onto the back with some slotted rotors, be a really good braking system upgrade, but for not a hell of a lot of money?

i wouldn't bother, just looking at the size of the front calipers (slightly bigger then the front R33 ones) you'd probably run into a fitment issue trying to put them on the rear, with bolt hole centers, rotor offest may be off even if you put the front rotor on the rear. also, and i'm not sure about this, but it may cause issues with brake bias.

a couple of R33/R32 rear calipers aren't to expensive, and at least you know they are designed to be a rear caliper.

Edited by QWK32

yeh thats fair enough, i wasn't aware there was bias' with the front and rear calipers, but yeh that does make sense tho :)

so probably a full set of 33 calipers and some nice slotted rotors to suit i think would be a decent braking upgrade, and some good pads too of course :(

so will the r32/33 four spots fit m35 ??? :)

i'm sure you could get them to fit, just how much work would be involved is another thing. what do the M35's have standard?

do you think there might be a better match/upgrade with something off the V series skylines?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • bumping this post as im still having dramas, my fuel pick up is sitting on the bottom of the tank, my pump gets a constant 13 volts through a relay, my fuel pressure holds consistently without fluttering or dropping, yet as soon as im near half a tank of fuel my car starts fuel starving and leaning out, it cant be due to g force as it never pulls hard enough before it starts breaking up, any help would be much appreciated 
    • Just a thought, was that car and auto at any point of its life? If so, maybe whoever bridged the inhibitor switch/circuit did a not so good job.
    • Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
×
×
  • Create New...