Jump to content
SAU Community

Recommended Posts

Well finally i bit the bullet and bought some Toyo Proxies RA1. These are a race tyre but are street legal similiar to the Bridgestone RE55. Im not expecting a very long life out of them but when you spend a fair bit of time spinning wheels, these are a huge releif. With the old Sumitunos HRZ 11's 255/40/17, 2nd gear wheel spin was at will as soon as boost hit. Good for showing off but not good for winning races. Now with these RA1's, i have 1st gear traction on the street and it is a rocket, no more hiding at traffic lights. Just for the record, i know RWD cars doing 1.6 60's with these tyres. Im not expecting 1.6, but if i can get 1.7/1.8 60's look out for a very low 12 and then i can drive it home. Perfecto.

Link to comment
https://www.sau.com.au/forums/topic/82245-traction-like-a-gtr-from-a-gtst/
Share on other sites

The drag spec Nitto's is what you want for straight line.

They handle quite well also.

Whatsisname had them on his car when it was making some where from 260-290rwkw and ran a low 12 with his granny shifting. :P

I remember him telling me he can get almost all the power from first down and second also.

The drag spec Nitto's is what you want for straight line.

They handle quite well also.

Whatsisname had them on his car when it was making some where from 260-290rwkw and ran a low 12 with his granny shifting. :P

I remember him telling me he can get almost all the power from first down and second also.

Where do you buy Nittos from? and how much are they roughly?

I just found this on Toyo's website:

The Proxes RA1 has the same construction & tread compound as the Nitto NT555R Extreme Drag Radial, and therefore provides very similar performance.

Don't know if I believe it but interesting... anyone know the price diff?

The Proxes RA1 has the same construction & tread compound as the Nitto NT555R Extreme Drag Radial, and therefore provides very similar performance.

If Toyo's RA1 (which they advertise as a clubsport circuit racing tyre) has the same construction and tread compound as Nitto's NT555R (which is reknown as a drag tyre), then one of them is going to suck at their advertised function.

Drag tyres make shit circuit tyres, because of their weak sidewalls. And vice versa.

With the rubber compound and tread pattern, I don't doubt that the circuit tyre will provide good grip compared to your regular street tyre off the line, but its still not ideal.

If Toyo's RA1 (which they advertise as a clubsport circuit racing tyre) has the same construction and tread compound as Nitto's NT555R (which is reknown as a drag tyre), then one of them is going to suck at their advertised function.

Drag tyres make shit circuit tyres, because of their weak sidewalls. And vice versa.

With the rubber compound and tread pattern, I don't doubt that the circuit tyre will provide good grip compared to your regular street tyre off the line, but its still not ideal.

Refer to my original post, I know guys using these tyres at the drags and producing awesome launches. As for me, my car now bites hard.

If they cant do both (drag and cornering) why do alot of quick street cars use RE55's and also Ben from RacePace uses these on his track GTR.

The Toyo's are a great "cold start" tyre. On the track they are awesome for the first 2-3 laps. From that point on they go off like "Mums pants on Father's Day". Excellent hill climb tyre and for street -the only thing to look out for would be to make sure they are not overworked too much. A lot of high speed continuous cornering would see them go off. Once they do, they become very "squidgy".

Good tyre though - except they will probably wear fairly quickly.

The Toyo's are a great "cold start" tyre. On the track they are awesome for the first 2-3 laps. From that point on they go off like "Mums pants on Father's Day". Excellent hill climb tyre and for street -the only thing to look out for would be to make sure they are not overworked too much. A lot of high speed continuous cornering would see them go off. Once they do, they become very "squidgy".

Good tyre though - except they will probably wear fairly quickly.

So far i have noticed, i can still get wheelspin in 2nd when they are cold, but once they warm up, grip is phenominal. Im yet to try them down the 1/4 as yet but im predicting a nice drop in my times. I dont track race so i can't adivse you, but i only have them on the back so i would be understeering quite badly.

The Toyo's are a great "cold start" tyre. On the track they are awesome for the first 2-3 laps. From that point on they go off like "Mums pants on Father's Day". Excellent hill climb tyre and for street -the only thing to look out for would be to make sure they are not overworked too much. A lot of high speed continuous cornering would see them go off. Once they do, they become very "squidgy".

Good tyre though - except they will probably wear fairly quickly.

So which tyres are good for track days?

Those bloody A032Rs....did you guys run the 48s? I am interested to see if they will be any better....I am hoping Gordon will be out of stock of the 32s when I need to buy the next set :P

Pete and Terry were having a tricky time with the 48s apparently?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok guys thank you very much. GCG highflow it is then 🙂 
    • forgot to mention that when it does this it does not kill the engine, but I have not kept the pedal down long enough to let it, as I see no reason to beat up on it as its got to be something simple, small and dumb causing this.  And as soon as I let off pedal, the engine returns to its normal super smooth operation and rpms re-stabilize quickly, once below 4k. 
    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
×
×
  • Create New...