Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Guys,

Im looking at ordering new wheels soon.

Anyone have experience running 19x10.5 + 12 wheels?

Any rubbing front/rear?

Was also thinking about going 19x11 +12 at the rears. Anyone run this before?

On a R33 GTR??

you want the same all round for that.

10.5+12 will be maximum

ofcoarse you can run any brake size with 19s

I've seen brakes not clear 19's on a r34 gtr, he had to get specific 19's but mostly ran 20's. Dunno what brand of brakes they were but 8 pot fronts and 6 pot rears, set him back around $15k I believe.

I've seen brakes not clear 19's on a r34 gtr, he had to get specific 19's but mostly ran 20's. Dunno what brand of brakes they were but 8 pot fronts and 6 pot rears, set him back around $15k I believe.

woooooooahhh

thoughts on 18x9.5 +22 front 18x10.5 +30 rear?

been reading through pages and pages but haven't found anyone running 18x10.5 +30 on the rear. will +30 be a problem with the strut or inner guard?

i want to run as close to 0 camber as i can

Hey guys,

I have never been completely happy with how my 18x9.5 +22 rims sit on my car.

So I decided to call up the place who did the wheel alignment and get the specs for the camber that they put on it.

Below are the details

Front Left: -2.27deg

Front Right: -1.14 deg

Rear Left: -1.39deg

Rear Right: -3.69deg

Does this sound right? I always thought 3deg camber was something the fan boys did

I'm questioning if he actually gave me the correct info.

Looking at some whiteline camber arms to help correct this.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
    • No, you're wrong, and you've always been wrong about this. The Nismo has 2 sets of openings. One is a real 2-way, and the other is a 1-way. There is no 1.5-way possible with the ramps that they offer. A real 1.5-way does exist. That Cusco stuff I posted is a prime example. If the forward drive ramps are, say 55°, and the overrun ramps are, say, 30°, then you will get about half as much LSD effect on overrun than you do on drive. It is real, it realy works. OK, you're slightly right. The Nismo has 55° and 45° ramps on the 2-way, so it does offer less LSD effect on overrun. But, I think that just means that they've (probably) sensibly established that you do not want actually equal LSD effect on overrun. You just want "quite a lot, but not quite as much as the drive LSD effect".
    • Just wanted to unearth this and post my baby with the new front ❤️😝 Took her to my wedding rehearsal today. Next up is getting wide skirts (after wedding)
×
×
  • Create New...