Jump to content
SAU Community

Recommended Posts

Will I need any mods or spacers or guard rolling ????

Skyline model = r34 GTT

Wheel diameter = 17"

Wheel width = 9.5"

Wheel offset = +12

Tyre size = ?

Modifications to fit = ?

Stop being a moron. Go back 1 page, and look. Oh wow there is 9.5+20 there, ON AN R34! Oh and he has written the mods to fit!! It's almost like this thread is full of information or something.

  • 2 weeks later...

Skyline Model = R32 GTST
Wheel Diameter = 18"
Wheel Width = 9.5 Fronts 10 Rears
Wheel Offset = +18 Fronts +15 Rears
Tyre Size = 235/40 Fronts 265/35 Rears
Modifications to fit = 20mm wide front guards 30mm wide rear guards
Fronts = 2.5deg neg camber
Rears = 1.5degs neg camber

Any many many hours fiberglassing
Is lowered cant figure out how to upload photos. everytime I use the photo/link button above and copy a link across from photobucket is freezes -.-

Edited by Cxxo

If you go into the "more reply options" you can upload and attatch, rather than linking via a site.

Is lowered cant figure out how to upload photos. everytime I use the photo/link button above and copy a link across from photobucket is freezes -.-

HI Guys, getting new tyres soon for my R34GTR.

I have Advan 18x10 +25 rims and they do not have the tyres I want in a 275x40 18 , but they have a 285x30 18 , would they fit without scrubbing.

I just went thru every page of this thread :)

I did have 19x9.5+25 with 245s and no mods were required...they are now sold i want jap wheels.

now im tossing up between the following for my r32 gtr:

1). 18x9.5+22 with 265s ('safe' option with gauranteed clearance on full lock & guards)

OR

2). 18x10+20 with 265s (will work with with no mods if i run nitto invo tyres, thx SIR-RB for the advice)

decisions decisions...also looking for other ppls opinions :)

Ok thx for the feedback :)

Would it be optimistic of me to think I can run 265s on 10s without guard rolling or is this simply required from your personal experience?

Where did it rub on your inner guards, on the front which sits directly behind the bumper bar right? What tyre brand are u running?

Ok thx for the feedback :)

Would it be optimistic of me to think I can run 265s on 10s without guard rolling or is this simply required from your personal experience?

Where did it rub on your inner guards, on the front which sits directly behind the bumper bar right? What tyre brand are u running?

I rolled the guards myself (on the rear). Previous tyres bashed the lip out on the front guards lol. Rolling is required unless you car is high. It'll probably still scrub.

Yep the front part, because I used to run a bit more caster. Had to dial some caster back and add negative camber up front (around -2deg, -1.5deg rear). Caster is around the 5deg mark.

I'm running Falken FK452 at the moment. Previously had old Bridgestone TS-02 or something with more rounded shoulders so didn't need guard rolling.

If you're worried about not rolling, then get 9" and run 255 wide tyres. I would rather roll and try to cram the widest tyre possible :P.

Model: r34 gtt

Wheel diamiter: 18"

Wheel width: 9.5" all round

Offset: +15 all round

Wheel size:225/40

Hi, I'm looking to buy a set of hks coilovers for my car and I saw these wheels for sale. If I bought these wheels how far could i lower my car before I would need rolling of the guards ? Also I'm not an expert on tires so while I'm posting this will 225's fit on 9.5's without any issues ?

Model: r34 gtt

Wheel diamiter: 18"

Wheel width: 9.5" all round

Offset: +15 all round

Wheel size:225/40

Hi, I'm looking to buy a set of hks coilovers for my car and I saw these wheels for sale. If I bought these wheels how far could i lower my car before I would need rolling of the guards ? Also I'm not an expert on tires so while I'm posting this will 225's fit on 9.5's without any issues ?

If you leave it stock height with reasonable tyre profiles, you won't need a roll at all. But that offset is fairly aggressive, and if you lowered at all you would need guard rolling and 2 deg negative camber to fit inside the guards. And yes, 225's sit nicely on a 9.5.

Refer to previous page, I have 225/40 on 9.5+20.

I rolled the guards myself (on the rear). Previous tyres bashed the lip out on the front guards lol. Rolling is required unless you car is high. It'll probably still scrub.

Yep the front part, because I used to run a bit more caster. Had to dial some caster back and add negative camber up front (around -2deg, -1.5deg rear). Caster is around the 5deg mark.

I'm running Falken FK452 at the moment. Previously had old Bridgestone TS-02 or something with more rounded shoulders so didn't need guard rolling.

If you're worried about not rolling, then get 9" and run 255 wide tyres. I would rather roll and try to cram the widest tyre possible :P.

i had all my suspension dialed in by heasmans & i am very happy with it :)

i dont want to 'potentially' compromise handling for the sake of running wider wheels...from this, i purchased 18x9.5+22 & will run 265s as i was told this would clear.

now i need to decide on tyres - any recommendations?

nitto invo OR nt-05 sound interesting.

i get mixed feedback on the federal rsr's

Thanks mate :)

Street use really but I want optimum grip due to the power level I'm running...as long as the tyres aren't too sticky where they pick up small rocks and scratch the bodywork haha

Hi mates, first post on the forums.

I just got one of the first two R34 GTTs in my country (Costa Rica!) and I definitely want to change the wheels it came with...

I have read through this thread and a couple others and I arrived at the conclusion that some 18x8.5 +30 front/18x9.5 +38 rear seems like it will work with the all-stock car (please correct me if I am wrong here!)

From that, I am eyeballing the Work Emotion Ultimate Kiwami wheels and I am wondering if these will be a good fit.

Any comments and ideas are really appreciated! :thanks:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...