Jump to content
SAU Community

Recommended Posts

hey guys atm i am working to make 200rwkw after my last dyno of a shit 140rwkw due to poor tune and lack of a few things

Mods last dyno

Gts-t R33 rb25det

Link Plug in replacement ECU tunes by poor shop at 7psi on 95oct fuel

PWR INTERCOOLER

K & N POD

Trust Catback

Now my new plan is mod then retune it at MRT in Sydney On 12psi and get near 200rwkw

New Mods that i hope help me get to 200rwkw

Dump and front Pipe Twin set up off BOS

Hi flow Catco cat

PLUMB BACK BLOW OFF VALVE caust stock one isn't working right Flutters on 7psi

loud ( NOT sure on what brand anyone know any good ones for Plumb backs

custom 3" pipe intake from turbo to Pod without AFM due to link computer

last of all thinking Cam Gears but will they heap on stock cams

anyone know if cam gears will gain more power r they worth the money also what brand

OS GIKEN or TOMEI

thinking about new Timing beat too while cam gears r off

what u guys think

Edited by scottman
Link to comment
https://www.sau.com.au/forums/topic/84593-adjustable-cam-gears-on-stock-cams/
Share on other sites

Those mods with a good tune should push you to that figure, or very close to it.

But if you looked in the Quick Ref guide at the top of this forum you would have seen the following threads

Ex. Cam Gear: http://www.skylinesaustralia.com/forums/sh...41&page=1&pp=25

Dump Pipe: http://www.skylinesaustralia.com/forums/sh...ead.php?t=10567

btw, 140kw is what you would expect for a near stock Skyline. That must have been a really really bad tune..

Those mods with a good tune should push you to that figure, or very close to it.

But if you looked in the Quick Ref guide at the top of this forum you would have seen the following threads

Ex. Cam Gear: http://www.skylinesaustralia.com/forums/sh...41&page=1&pp=25

Dump Pipe: http://www.skylinesaustralia.com/forums/sh...ead.php?t=10567

btw, 140kw is what you would expect for a near stock Skyline. That must have been a really really bad tune..

I know 140rwkw is low but i beat one of my mates with a gts-t with a full exhaust so i am guessing maybe the dyno was just out been just beaten by a 180sx and onces by a gts-t with least mods then mine he was a better driver

I am Hoping its just the Tune Mrt will work out whats holding my Power back

Tony,

Cmon you should know better ;) Those are the "Revision 1" HKS gears. The "Rev. 2" gears -- which use duralumin -- don't appear to have the same problems.

Edit: I'd still look at getting the Tomei gears as part of the camshaft + camgear packages they do.

LW.

Cam gears will make some difference, but not 60+ kw. (AFAIK, all they do is move the power band, they don't necessarily make more power).

I suspect it's the tune. I'm running a RB25DET on a Wolf 3D. It has VVT, and is otherwise stock. It was tuned at 10psi on 95 octane, and pushes 180 kW out through 4 wheels (R32 GTS4). Granted it does also have a "hi-flo" cat and a dump pipe, but still runs the factory air box and filter.

Hey whats the deal, is there something freaky about my car cause i got it dynoed with minor mods (see sig) and even at 7psi it was pulling 169rwkw, and was 186rwkw @ 10psi.

Was dynoed at unigroup, i would have thought scottmans would have been more powerful...

Must be UBER dodgy tune

i have no idea why its only 140rwkw i am hoping to try and fix it hoping its just the tune

other things it cound be is Fuel Pump or injectors or something MRT will find out hoping to fix it :P

still i own lots of shit with 140rwkw :blink:

I thought it was shited so i went and raced my mates Gts-t r33 with a Full Exhaust and BOV and i beat him so i have no Idea maybe it was the dyno

If you want to try adjusting the inlet gear whilst keeping the use of your VVT, PM me.

I've got a little invention that may just help you out.

Yo bass.Have you made some for r33 now.Or is this a trick that you have up your sleve.

I have the newer HKS gear and its fine....

Didnt gain anything at all... Just got a few more km's per tank and smoothed out the top end.... No jerky action inbetween 6-7000k....

AND more importantlly i got FLAMES>>>>> LOL

Scottman, what dyno was it on ? The dynologs read alot lower than the DynoDynamics ones (most common).

I just had car on dyno yesterday to retune, and all i could get was 145 rwkw's (Dynolog)

(was tuning it myself)

Now bear in mind this is S1 R33 GTST, std turbo

3" turbo back, and i just put a 4" magic cat in (which does work well by the way , 4 gas analyser confirmed)

I have a plug in LINK. No AFM (3" SS Pipe to pod)

Carbon cleaned it too.

R34 GTT cooler

And just fixxed the coil probs with a mates 32 GTR coils borrowed till the splitfires arrive... also new BKR6EIX iridiums (.8mm std gap). After last tune the coils shat themselves , siliconed them to get by, but power was flat...

Also fitted a MV auto shift kit.

Its been a busy 2 weeks !

Heading out to drags again tonight to see how it goes...

Two weeks ago with it feeling flat it ran a 14.6 @ 95.3 mph So i hope i can get a 13 tonight ... time will tell.

I think you should go out to the strip and just see what mph your getting ......that will be a better indication of how well the cars going.... as your dyno may read low as well.

Gary

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
    • FYI: Racebox RE7R Custom Tunes Released!   https://goracebox.com/.../2017-infiniti-q50-q60-re7r-tcm...   FOR GEN 2 (21+) VEHICLES, PLEASE SEE NOTE AT BOTTOM See more   But whomever tuned your car is the tuner you should go back to, AMS, Sonictune or BT Tune....
×
×
  • Create New...