Jump to content
SAU Community

Recommended Posts

Was a good turnout, alot of nice cars.

Whats the deal with that dude with the bluebird wagon claiming his car was wheelspinning, and bagging shauns dyno opperating...?? check his web site at this link

www.srt910.com

check the graphs and make up your own decision, you can see at peak torque the power dips and is all wavy from then on, also the torque curve turns quickly depicting what wheel spin would to a dyno graph.

This in its self I have no problem with, if you car wheel spins on the dyno so be it, it spun, but the part i do have a problem with if for someone to turn around and tell me there is 100% no posibility,no change ever that it wheel spun, and that my previous runs are "reading high" because of a higher ramp rate used, when after i found out what ramp rate was used,his comment is completly untrue.

So that is my opinion, you have your opinion.

Edited by SR910
  • Replies 294
  • Created
  • Last Reply

Top Posters In This Topic

Bagging Shaun and his dyno (on the open internet) because your not happy with the result you got (on a dyno day where he is pressed for time) doiing his best getting everyones car on and off is bad form in my opinion....

Sky30's car did wheelspin (you could see it and hear it), which Shaun had to restrap it down cos it got a little off line from memory...

Edited by Bl4cK32

Shaun is not bothered who won or lost, he doesn't

own any of the cars, and any that were there are built to the

owners wishes,He is just doing his job . To think he is worried about

your car winning SR910 shows how modest you are :) ,

Bloody dyno queens :angry:

Edited by S3_Girl

awesome day guys, thanks to everyone who put in their efforts. Just finished putting my footage to vcr, looks great but its not a digital camera so i can't post it up i'm afraid. Loved seeing sky30's car on there hoping that i can one day make that with my rb30.

Once the Rb30 is in my car i will definitely be taking the car to Shaun for everything dyno and otherwise related, very professional guy!

Good luck to everyone with their cars and keep modding so our next dyno day can be even bigger and better with more cars. I'm suggesting the end of summer once it cools down again but so that the weather is still nice like yesterday!

check the graphs and make up your own decision, you can see at peak torque the power dips and is all wavy from then on, also the torque curve turns quickly depicting what wheel spin would to a dyno graph.

This in its self I have no problem with, if you car wheel spins on the dyno so be it, it spun, but the part i do have a problem with if for someone to turn around and tell me there is 100% no posibility,no change ever that it wheel spun, and that my previous runs are "reading high" because of a higher ramp rate used, when after i found out what ramp rate was used,his comment is completly untrue.

So that is my opinion, you have your opinion.

The dyno graph should show large dips if the car is wheelspinning bad during a run. It is also easly seen and heard, but realy dont care if your car was or wasnt wheelspinnig on the dyno, or what power it made(all cars were run on the same dyno, the same day, by the same opperator). Baggin out shaun on the Net aint a good thing to do.

The dyno graph should show large dips if the car is wheelspinning bad during a run. It is also easly seen and heard, but realy dont care if your car was or wasnt wheelspinnig on the dyno, or what power it made(all cars were run on the same dyno, the same day, by the same opperator). Baggin out shaun on the Net aint a good thing to do.

So incidentily would it show smaller dips for less then "bad" wheel spin, consitering the losses were only in the region of 35+ kw? Just like it shows on the sheet.

I dont care if i "win or loose" a dyno comp, i dont care if my car wheel spins on a dyno, i do care about what a dyno operator says about integrity of the people i use to work on my car.

but that is ok, i didnt mention anything here, i didnt even mention the dyno operators name, your the one who brought it up here, i talk about my experiences and opinions on my website about my cars.

Have a nice day

more like he didnt want certain cars he has built with 2 more cylinders and another litre of displacment with the same turbo to get upset

my "opinion"

more like someone didn't want to face that another car using a engine only cost 1/3 to built with tons better off boost pull better result with the same turbo setup hence get upset :lol:

Edited by Maxx

Good call on the yellow 33 there Chops, was a bit of a sleeper i thought, would be happy with those results out of mine :P

Yeh thanks Ash for your hospitality afterwards, would have come to Andrews but mate racing yesterday had to sort some Kart issues out, Next time for sure.

Good to see so many Skylines on saturday and catch up with a few people

Had to leave early due to other commitments, thanks to everyone who organized it and big thanks to Boostworx for the day and for all the stuff done on my car

Here's my chart, nice torque for a little 167,000km old RB20 :P

Need a bigger turbo!

post-493-1130112248.jpg

Thanks heaps to Will and Boostworx for the day, and anyone else who helped :P

I would also like to thank the sympathetic comments that people made when they saw the key marks on my poor car.

That shit was f**ked up, i just don't know how these low-lives can act like that, just gets me angry thinking about it again.
Here's my sheet from the Crown.

Thanks for letting me join in boys, much appreciated.

Sean

Mate i would have been bloody disappointed if you HADN'T put it on the dyno, you can't tease us with 4.5L of donk and turbo as big as your head and not run it, and from the back seat the power delivery felt impressively smooth it just kept pulling. :D
What turbo does he run?

What boost?

ECU?

Injectors?

Cams?

I second this Sky30, keen to know the specs above especially the specs of the 35/40 u r running! Looked so tough watching the footage back on TV!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...