Jump to content
SAU Community

Recommended Posts

I know the twin turbo 3ltr sequential twin turbo supra has a lot of potential. But I was just wondering if anyone knows what rwkw are achievable with the following mods

- After market cooler

- Power FC or equivalent

- full exhaust system from turbos back.

- boost increase with stock turbos

From reading these forums and from personal experience these mods on a RB25 with 10-12psi of boost ~200rwkw seems to achievable. I know the supra will make a lot more power than this but how much more?

Edited by Munna
Link to comment
https://www.sau.com.au/forums/topic/90052-toyota-supra/
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Well.. when we were at the dyno day with OCAU a supra running pretty much the same setup except it was running a SAFC2 and a boost controller I believe.. he reeled off about 240kw..

Thanks thats about what I would have expected anyone else? What 1/4 mile times would a supra with these mods and a good suspention setup get?

Link to comment
https://www.sau.com.au/forums/topic/90052-toyota-supra/#findComment-1623994
Share on other sites

My brother has a '95 Supra RZ with those mods, plus a Trust pod filter, Bosch 044, AVCR and a Malpassi fuel pressure regulator and is making 272rwkw at 14psi. He could be making a little bit more, but needs a new dump pipe.

"They taste like burning!"

Link to comment
https://www.sau.com.au/forums/topic/90052-toyota-supra/#findComment-1624554
Share on other sites

The dump isn't stock; it's a 3 inch dump. But he was told that a 3" dump was too large for the stock turbos on a Supra as the wastegate can't control the boost properly (needs the back pressure). So he's had a restricter put into the dump until he gets a new one.

"They taste like burning!"

Link to comment
https://www.sau.com.au/forums/topic/90052-toyota-supra/#findComment-1624659
Share on other sites

Got a friend who got there 1996 TT (6spd) Supra dynoed with the following setup:

1. Aftermarket Front Mount Intercooler

2. Stock Air box/Turbos/Boost setting 10psi or there abouts

3. Catback- OR turbo back exhaust (unsure)

4. 18" rims.

result:

214rwkw at unigroup.

Link to comment
https://www.sau.com.au/forums/topic/90052-toyota-supra/#findComment-1624706
Share on other sites

2JZ-GTE into an R33 is stupidity in my opinion. 2JZ with the 6 speed costs an absolute fortune, and an RB26 can make similar power. If you really want the BIG CUBE straight six, you could probably build a killer RB30DETT for less than a 2JZ engine swap. The cost of installing a 2JZ would be phenomenal.

Link to comment
https://www.sau.com.au/forums/topic/90052-toyota-supra/#findComment-1624976
Share on other sites

Keep a Supra engine in a supra, and an RB in a Skyline..

If you want extra power in a Gts-t.. go and buy an R32 GT-R than you'll even it up.. what a skyline lacks sometimes in raw power, it makes up for round the corners.. ATTESSA.. and a couple of other areas..

Personally I would love a Supra TT - but for 40k i'd be hard pressed to not buy a R33 GT-R..

They are definately quite a nice car.. I love the look of them.. so sleek.. with a set of rims, lowered with no wing.. droooolling..

Link to comment
https://www.sau.com.au/forums/topic/90052-toyota-supra/#findComment-1625025
Share on other sites

Thanks everyone I know that the supra is quicker over the 1/4 than the r33 gtst from the factory.

How would a R33 GTS-T fare against a the supra both in street trim at this level of modification assuming they both have a decent suspention/tyre setup. Keeping in mind the supra weighs 200kg's more.

I know that the skyline is capable of high 12's what can the supra do?

Link to comment
https://www.sau.com.au/forums/topic/90052-toyota-supra/#findComment-1625140
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...