Jump to content
SAU Community

Recommended Posts

not so bad, you can now buy something that works. HUMM, maybe i should do thesame. LOL.

On another note, i scorred all the gaskets and studs and bits and pices needed for the exhaust manifold repair for $154 all up. YEEHHHAAAA.

Looks like i have sold my snotter :(

damn :ermm::ban:

not so bad, you can now buy something that works. HUMM, maybe i should do thesame. LOL.

On another note, i scorred all the gaskets and studs and bits and pices needed for the exhaust manifold repair for $154 all up. YEEHHHAAAA.

you can both buy my 33 :O , hasnt missed a beat :w00t:

not so bad, you can now buy something that works. HUMM, maybe i should do thesame. LOL.

On another note, i scorred all the gaskets and studs and bits and pices needed for the exhaust manifold repair for $154 all up. YEEHHHAAAA.

:O you shouldn't even have to ask what the plan is!!!

damn :ban::(

you can both buy my 33 :ermm: , hasnt missed a beat :w00t:

Still got the turbo for sale though Toff :P

Id love to buy your 33 but i just need some wheels to get around the net few weeks as it is without being fancy!!!

wogs....what was your torque reading on the 25?

at 170rwkw my torque was 550.2Nm !!!

dam thats ship loads. maybe i should bold an old rb30 in my 32 and bolt on a dirty old turbo. surly that would spin the wheels easy.

hahahah, you can feel the torque, well after owning silvias, r32 gtst, r31 gts with rb25, 300TT, vr4 etc etc.....Like the torque of the RB30.

Yeah turbo on, just sorting out the little problems like getting the raditator flushed today and the flywheel machined (damn vibrations in the clutch made it look like I was a retard trying to drive)

LOL. yeah i miss tourqe, the magan has a bit over 400 nM at the front wheels, and that is GREAT, any gear, bag, your away. Skyline, you need to rev it to get anywhere. LOL.

Well done mate, can't wait to see it.

On an up note, found out last night that my FICD, FIRTS IDLE CONTROLL DEVICE solenoid, doesn't work. See if this makes any differance.

plan B, build the bitch up, pronto. LOL.

That requires money and i owe more than i have let alone coming up with enough to rebuild it.

Im going to strip as much off/out of the shit heap as i can and flog it all along with the rolling shell!!!

Then once thats done im out of cars for a while, IM OVER THEM and all there PROBLEMS

Before you get too excited about torque figures remember a dyno set up in power mode (eg rwkw) will not accurately measure torque.

I mean, if the dyno was set up for a torque reading and you got 550Nm then that's an awesome result, but if it wasn't then there is absolutely no truth in that figure. This was a big problem after the dyno day with Dr Drift when everyone started saying "I have such and such Nm", when all their figures were complete rubbish.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...