Jump to content
SAU Community

Recommended Posts

spose ill update lol,

new hks2530 was put in a month or so back same with bosche 040 pump.

have powerfc, injectors and z32 waiting to go in as well as an oil cooler/reloc kit.

new body kit is being worked on and nearly done.

suspension should be here soon..hopefully!

nothing happening to the rx7, but plenty on the mitsubishi side of things... the lancer will soon be ready for new paint.

the skyline goes into the bodyworks for tidy up soon too.

post-5400-1226035624_thumb.jpg post-5400-1226035640_thumb.jpg

  • 2 weeks later...

So...

- Now have a TT 5sp Soarer

- Have pulled the turbos off

- Am just about to fit TR43i, stainless manifold, 50mm gate, Walbro pump, FMIC and make custom exhaust and cooler piping

- Just shopping for an adj fuel pressure reg and ecu/piggy back

Also, just picked up our new family bus.

stagea1yw5.jpg

stagea2vo4.jpg

well pick up my car today with the new turbo fitted :) trail fitted the body kit side skirts and rear bar very very average fit :down: will be fitting bonnet tonight, so ill wait and see how good that fits

got the rx7 back with the engine removed! (was going to do it myself but no time at the moment and need to get things cracking if its gonna make the start line next season!)

will now strip the engine of all the crap on it and the gearbox then its off for freshening!

the engine bay is pretty tidy, but will clean it up and repaint.

got the rx7 back with the engine removed! (was going to do it myself but no time at the moment and need to get things cracking if its gonna make the start line next season!)

will now strip the engine of all the crap on it and the gearbox then its off for freshening!

the engine bay is pretty tidy, but will clean it up and repaint.

There will be nothing left if you do that Stu :)

I need a knock sensor to finish my car off :down:

well few pics from todays vist :D

Body kit fitment not to bad side skirts need a fair bit of work but front and rear just a lil trim here and there and will be a perfect fit,

few pics to give you a rough idea of what it will look like when finished :down:

DSC00677.jpg

DSC00679.jpg

DSC00681.jpg

DSC00682.jpg

Guess i better do an update on mine, it's sat in a corner of the shed since i picked it up from having the cage done, so this weekend i pulled my finer out and gave the inside a cleandown and started painting it. at this stage it won't be back on the road til jan, but hopefully before christmas. On another note, anyone interested in buying it?

post-25384-1227418248_thumb.jpg

post-25384-1227418363_thumb.jpg

post-25384-1227418459_thumb.jpg

post-25384-1227418585_thumb.jpg

^^^ love the bonnet and a nice choice of kit, 34's can look horribly wrong but that kit makes it look wider and neater.

GT-R made 270kw on 15psi and made 1547.3 n.m of torque.

will wind up the boost (around 22-23psi) next tune to see what i can get out of it.

^^^ love the bonnet and a nice choice of kit, 34's can look horribly wrong but that kit makes it look wider and neater..

thanks mate :thumbsup: well car is now fixed no more break down at 4600RPM coil packs FTL :huh: but all good now :ph34r:

Mines coming back together now. fitted new radiator and put all the loom back and other bits and peices that were removed for the respray. should be on target for a pre christmas finish. anybody got a interior carpet for sale?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.  
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...