Jump to content
SAU Community

Recommended Posts

well picked the up the R34 today from SPG.... car is a beast now lol goes hard, bascily splitfires fitted PFC fitted tuned, 040 fitted, service, boost controller fitted :D run's like a dream now

New front bar and lights going on after some numbskull backed into the GTR in Woolies carpark on Sunday arvo.

Not like he hit it real hard, just pushed the whole car nearly a meter backwards, while it was parked, unattended, with the park brake on and stuff...

New front bar and lights going on after some numbskull backed into the GTR in Woolies carpark on Sunday arvo.

Not like he hit it real hard, just pushed the whole car nearly a meter backwards, while it was parked, unattended, with the park brake on and stuff...

Ouch :blink:

New front bar and lights going on after some numbskull backed into the GTR in Woolies carpark on Sunday arvo.

Not like he hit it real hard, just pushed the whole car nearly a meter backwards, while it was parked, unattended, with the park brake on and stuff...

Saw the car not pretty :)

well got my car back on saturday, PFC installed, splitfires in full service, 040 put in boost controller put in car was a rocket, got it into launnie and sunday the oil seal in the turbo shit it self. so i just want to say i FARKING hate KKR :blink: so learnt my lesson :) so now looking into a HKS 3071 and some bigger injectors ?

Edited by ian_and1
Ouch :)

Doesnt really look like much at all actually.

Till ya get the bar cover off and see all the little bits that add up.

The rio is creased and bent on both sides, lh headlight has been pushed sideways into the indicator breaking the mounting lug, the rio mounts are bent and will need to be straightened...

Its been in the bodyworks today so they can do a quote and send off to my insurance company (Thumbs up to Shannons and Cooee Bodyworks)

I think the guy who did it will be a bit surprised when he gets the bill from them as he doesnt have insurance and I dont think he knows exactly what it was he backed into.

well got my car back on saturday, PFC installed, splitfires in full service, 040 put in boost controller put in car was a rocket, got it into launnie and sunday the oil seal in the turbo shit it self. so i just want to say i FARKING hate KKR :D so learnt my lesson :P so now looking into a HKS 3071 and some bigger injectors ?

Just before you get all suicidal check all your breather plumbing and PCV valve to make sure your not building up to much crankcase pressure. A turbo seal is like a piston ring, so not a lot should go wrong in such a short time, but even a new seal will leak if there is to much backpressure in the bearing cavity so that the oil can't drain out. :D

Just a thought.

Doesnt really look like much at all actually.

Till ya get the bar cover off and see all the little bits that add up.

The rio is creased and bent on both sides, lh headlight has been pushed sideways into the indicator breaking the mounting lug, the rio mounts are bent and will need to be straightened...

Its been in the bodyworks today so they can do a quote and send off to my insurance company (Thumbs up to Shannons and Cooee Bodyworks)

I think the guy who did it will be a bit surprised when he gets the bill from them as he doesnt have insurance and I dont think he knows exactly what it was he backed into.

Don't you hate people without inssurance :P

well got my car back on saturday, PFC installed, splitfires in full service, 040 put in boost controller put in car was a rocket, got it into launnie and sunday the oil seal in the turbo shit it self. so i just want to say i FARKING hate KKR :) so learnt my lesson :bunny: so now looking into a HKS 3071 and some bigger injectors ?

Garrett 3071, Hks version is 28-35 and about $2k more, http://www.horsepowerinabox.com/HPIAB2/category12_1.htm

The 3071r on here are bolt-on and some guys on SAU are making around 275rwkw. As for injectors there’s not a lot out there for neo's but Ben at SPG will be able to get them for you.

Edited by RAZOR32

I dropped the rear end our of the car today. I'll change the bushes and wheel bearings tomorrow and put it back together. thats after i cover it in degreeser and clean it all up.

some dody phone pics:

post-5985-1236513742_thumb.jpg

post-5985-1236513782_thumb.jpg

Got our wagon back last Friday and took it for a drive Saturday to blow the cob webs out after 2 months, believe me they are all gone!!! 'Vi-pec plug & play' works a treat with auto. My vote for Pete Lockett at Fuel Tech Automotive, Launceston.

Getting everything together to finish my car off ready to be tuned as i dont want it to be off the road for 4 years :)

Car currently sits with the following set up:

RB20DET

TD-06 20g L2

HKS 264 cams

Tomei 555 injectors

GK Tech cam gears

HYBRID GT FMIC with GReddy hotpipe

Just Jap oil cooler and relocation kit

APEXI power intake

Thanks to BMS i have coils, Z32 and coil cooler on the way, a decat pipe thanks to the guys from SPG and a new extinguisher supplied by Hamish @ REVOLUTION.

Once fitted (next week hopefully) the car will be ready for rego/tuning so i can start driving it again.

Getting everything together to finish my car off ready to be tuned as i dont want it to be off the road for 4 years :D

Car currently sits with the following set up:

RB20DET

TD-06 20g L2

HKS 264 cams

Tomei 555 injectors

GK Tech cam gears

HYBRID GT FMIC with GReddy hotpipe

Just Jap oil cooler and relocation kit

APEXI power intake

Thanks to BMS i have coils, Z32 and coil cooler on the way, a decat pipe thanks to the guys from SPG and a new extinguisher supplied by Hamish @ REVOLUTION.

Once fitted (next week hopefully) the car will be ready for rego/tuning so i can start driving it again.

By the sound of it Ben our car's will be hitting the road about the same time, Sweet!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...