Jump to content
SAU Community

Recommended Posts

sooo ! got my car back ! love it turbo sounds insane spooling up as well sending my ecu off next week to nistune for the tickel and lick lol then ill have to look into AFM Hmm after some reading a z32 could be my next upgrade .

all thats new for me is my dent has been fixed just waiting to paint it nowthumbsup.gif & i also worked out i still have the mines ecu, witch would explain why i don't have the speed limiter & the rev limit has been raised thumbsup.gif

another one? :( i think a mate may have one if you haven't got one already,

as for my car i was going to see if the GTR bar that toffy lent me would fit but i would have had to un mount my cooler & it was dark so ill do it another day, also found a split catch can hose pinch.gif all fixed now thothumbsup.gif

any other 33 owners have surge issues when around quarter of a tank? thinking i may need a new pump or maybe a surge tank

Edited by Autumn33

R33s are usually pretty good for fuel surge because of the nice shape of the tank. I've still just got the stock fuel setup with a walbro pump, loves to drift and I spin out more often than not, haven't had any problems with surge.

another one? :( i think a mate may have one if you haven't got one already,

as for my car i was going to see if the GTR bar that toffy lent me would fit but i would have had to un mount my cooler & it was dark so ill do it another day, also found a split catch can hose pinch.gif all fixed now thothumbsup.gif

any other 33 owners have surge issues when around quarter of a tank? thinking i may need a new pump or maybe a surge tank

Just check that who ever changed it didn't fit it back in the tank wrong , when i first got my white 33 (or my ex's now) it had been changed and they put the fuel pump where the level indicator thingy is supposed to go , if i cornered hard right it would run out of fuel under 1/3 of a tank pinch.gif . And check it's in its mount properly too!

Well today I got stuck into hacking up my front bar, and picked up a huge ass sheet of 2mm aluminium to make my splitter up. ordered some nice adjustable turnbuckles out of the states. gonna have to wait a week or two for those babies to arrive but that gives me time to repair the rest of the bar and start prepping for primer.

also have some bilsteins to replace my knarley old Tein HR's. so the Ol' dusty datsun is seeing a bit fo love atm.

Well today I got stuck into hacking up my front bar, and picked up a huge ass sheet of 2mm aluminium to make my splitter up. ordered some nice adjustable turnbuckles out of the states. gonna have to wait a week or two for those babies to arrive but that gives me time to repair the rest of the bar and start prepping for primer.

also have some bilsteins to replace my knarley old Tein HR's. so the Ol' dusty datsun is seeing a bit fo love atm.

look forward to seeing this splitter :yes:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Started sifting thru my brakes to decide which ones I will run on Clem   Made me think I should just put them all on Silver...for when brake fade just isn't an option   Should be able to bump rotor up from 343x32 to 348x36 off Supra. Not sure if the Supra annulus is right for the Alcons or APs but trying g to find a used Supra\M4 rotor to test fit The Alcons seem to gain 1-2mm clearance which all helps  
    • So car is getting a few mods to the cage and some jacking points welded in Meantime Ol Silver gets a new gearbox and shiny clutch.  Old Box is being set aside for Clem  
    • Probably speedometer itself if the odometer is ticking. If the needle is stuck from a bit of grease or something that can cause it to stay at 0. Or a cracked solder joint in the speedometer can do it too.
    • Thanks Fella’s   to take this off topic and to elaborate a bit more. I have an rb25/30 going into a r32 GTST.. expected to make around 600-700hp. Would you?   A) R34 GTT box   B) CD00#?  I’ve seen a few posts about the CD swap and sounds fairly involved with making it fit etc but if it’s worth the work then I’ll go that way
    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
×
×
  • Create New...