Jump to content
SAU Community

Recommended Posts

new tie rod end for me, will get the other one tmrw (only had 1 in stock)

the ball actaully popped out when i was taking the old one off! glad i chose today to change them

how much to make me one to suit the stagea?

probably only needs to be a little longer, i have a flange near the diff too

looks like a pirate! pirate.gif

depends wat you want i asked the guy he said $150 to make it ( with flanges gasket pipes joiner)... the more you supply cheeper it is thats to cover his time gas ect .. let me know and ill get you his number ?

mines just after the diff too :D

sooo :D got my Vi-Pec all done car is so much better to drive around town ( i took all the return bov set up off ) and high ways ;)

only one problem ... fuel pump has had the dick pinch.gif i changed the fuel filter about 2weeks ago and it was the factory one :mellow: cut it open and i was suprissed the car even started...

wen i brought it the guy said it was a GTR Pump HA FAIL think its std as iv never taken it out :pwned:

new 340L/Pm pump should be here tomora so il take it back get the pump put in and re-tuned as atm the fuel cut is set to 4300 Rpm wen it starts to lean out

SO..............for sale is a nistune board and manual R34ecu it is running the std map PM me for price :banana: i took lots of pics befor a wrapped it up for postage so just ask if you want a look

sooo :D got my Vi-Pec all done car is so much better to drive around town ( i took all the return bov set up off ) and high ways ;)

only one problem ... fuel pump has had the dick pinch.gif i changed the fuel filter about 2weeks ago and it was the factory one :mellow: cut it open and i was suprissed the car even started...

wen i brought it the guy said it was a GTR Pump HA FAIL think its std as iv never taken it out :pwned:

new 340L/Pm pump should be here tomora so il take it back get the pump put in and re-tuned as atm the fuel cut is set to 4300 Rpm wen it starts to lean out

SO..............for sale is a nistune board and manual R34ecu it is running the std map PM me for price :banana: i took lots of pics befor a wrapped it up for postage so just ask if you want a look

pins and ecu are in perfect condition all work was done by Nistune

DSC_1271.jpg

DSC_1267.jpg

DSC_1266.jpg

My skyline is now ready for battle :D

Just got a wheel alignment done -4 degrees on the front camber, looks quite aggressive now, need to buy a pyrometer to see if it's aggressive enough though.

Oil restrictors in now too, should keep the top end oil in check.

Dash is all setup, I just need to get out to the track to see if I've done the GPS lap timing stuff right.

You better be at Round 5 of the drift series, just isn't the same without your limiter bashing thumbsup.gif

oh I'll be there...

4th gear, on the limiter around the whole thing!

That cover looks the goods man. Did you just make a flat piece of carbon then cut to suit?

Well I've almost got everythimg bolted on my engine ready to drop it in hopefully next weekend. Spent today modifying the external oil drain as it didn't clear the rear dump pipe so had to change the bottom 45degree fittings to 2 90degree ones and now it's sweet. Put the last few things back in the engine bay and got that tidy ready for the engine. Now all thats left is finish the turbo oil/water lines, oil drains, set up the timing, put the clutch on and drop it in. Then comes the fun part of connecting everything......

yea its just an off cut of some flat layed stuff. does the job thoe.

depends wat you want i asked the guy he said $150 to make it ( with flanges gasket pipes joiner)... the more you supply cheeper it is thats to cover his time gas ect .. let me know and ill get you his number ?

mines just after the diff too :D

in ltown?

did you consider the rb26 clip over cover?

or just had it there so did it type thing?

never thought of that but i wanted somthing that covered more than just the wires. that would have been a good option.

does this allignment look ok to you guys?

all they seemed to have done is adjust my awesome toe (changed tie rod ends) but all the others are the same as before, all are within spec but right on the limit

2011-10-27073527.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...