Jump to content
SAU Community

Recommended Posts

its just coz its your thread isnt it!

haha, i think you are right, i just wanted to spam before as Ska spammed beforehand >_<

hahaha, I had a feeling someone would say that!!! :D

  • 4 weeks later...

So guys, seeing as this is the buyers guide. Can someone give us a rundown on each model, and what you get with it. (including the non-compliable non-turbos). If possible can someone also explain the different chassis No.s. It all gets pretty confusing when browsing the jap sites, as to what you're actually looking at.

So guys, seeing as this is the buyers guide. Can someone give us a rundown on each model, and what you get with it. (including the non-compliable non-turbos). If possible can someone also explain the different chassis No.s. It all gets pretty confusing when browsing the jap sites, as to what you're actually looking at.

Alright, here's a basic run-down:

Model:......................Driveline:...............Engine:..............Chassi

Code:

RS Four S..................AWD manual..........RB25DET Neo......WGNC34

RS Four V..................AWD......................RB25DET............WGNC34

RS Four.....................AWD......................RB25DET............WGNC34

RS............................RWD......................RB25DET............WGC34

25X Four...................AWD.......................RB25DE.............WGNC34

25G Four...................AWD.......................RB25DE.............WGNC34

25X..........................RWD.......................RB25DE.............WGC34

25G..........................RWD.......................RB25DE.............WGC34

20G..........................RWD.......................RB20DE.............WHC34

So, basically, when it comes to model spec, "RS" is anything turbo, "RS Four" is turbo AWD, "Four" is any AWD, and "RS Four S" is turbo AWD with manual (series 2 only, and there were NO turbo RWDs).

As far as chassis codes, series 1 all had an "E-" prefix (such as E-WHC34), and series 2 all had the "GF-" prefix (such as GF-WGNC34).

WHC = RB20DE power (the lowest model and in one spec level and RWD only)

WGC = RB25DE or RB25DET power, and RWD only

WGNC = RB25DE or RB25DET power, AWD.

So, H = RB20 power, G = RB25 power, and GN = RB25 + AWD.

All this info was found RIGHT HERE, and I will update the first post when I have time with more specific details regarding release dates, spec levels, and options.

So, basically, when it comes to model spec, "RS" is anything turbo, "RS Four" is turbo AWD, "Four" is any AWD, and "RS Four S" is turbo AWD with manual (series 2 only, and there were NO turbo RWDs).

there was turbo RWD variants

25t RS V Wagon FR AT Gasoline 2498 RB25DET GF-WGC34

they just werent available in manual, and were not released until August 1998...AKA series 2

Hey guys, thanks for that. I have been browsing too, and found this link http://www.nissan-global.com/GCC/Japan/NEWS/News6Eng.html

it covers the 1st realease of the Stagea by Nissan, it also has all the specs.

  • 1 month later...
  • 2 months later...

Hey finally found THE spec list. This is for series 2's. It's from the online catalogue, which I will post up the link. Be aware that this is through google's language tools. It's a translation from the original japanese site, (so for lead, as a color - read RED...I kid you not!).

http://64.233.179.104/translate_c?hl=en&am.../language_tools

  • 2 weeks later...
i replaced everything with Pioneer dealies. splits in the front, 4 ways in the rear doors, AMP and 2x 10" subs in the boot. goes awesome

Ok, so have been offered a 96 stagea straight swap for our modified 94 skyline R33, what should I look out for guys... also what is the insurance like on these little things? is it cheaper or the same because it is still imported and turbo'd? have rung for a quote but waiting on a callback...

Thanks in advance.

Alright, here's a basic run-down:

Model:......................Driveline:...............Engine:..............Chassi

Code:

RS Four S..................AWD manual..........RB25DET Neo......WGNC34

RS Four V..................AWD......................RB25DET............WGNC34

RS Four.....................AWD......................RB25DET............WGNC34

RS............................RWD......................RB25DET............WGC34

25X Four...................AWD.......................RB25DE.............WGNC34

25G Four...................AWD.......................RB25DE.............WGNC34

25X..........................RWD.......................RB25DE.............WGC34

25G..........................RWD.......................RB25DE.............WGC34

20G..........................RWD.......................RB20DE.............WHC34

So, basically, when it comes to model spec, "RS" is anything turbo, "RS Four" is turbo AWD, "Four" is any AWD, and "RS Four S" is turbo AWD with manual (series 2 only, and there were NO turbo RWDs).

As far as chassis codes, series 1 all had an "E-" prefix (such as E-WHC34), and series 2 all had the "GF-" prefix (such as GF-WGNC34).

WHC = RB20DE power (the lowest model and in one spec level and RWD only)

WGC = RB25DE or RB25DET power, and RWD only

WGNC = RB25DE or RB25DET power, AWD.

So, H = RB20 power, G = RB25 power, and GN = RB25 + AWD.

All this info was found RIGHT HERE, and I will update the first post when I have time with more specific details regarding release dates, spec levels, and options.

Well, now I am really confused.

My car has 25X on the tailgate, but this can't be true because it is definately a RB25-DET

It also has the same RSFour badge on the grill as all the others I have seen on the site.

But it doesn't have any body kit at all, not even the lower front lip, and it doesn't have the privacy glass on the back windows or cargo area.

It also has all woodgrain console and door trim highlights.......

Any one has any ideas as to why it would have the 25X on the tailgate?

Hi Dale

You have to realise that the basic rundown is basic, it doesn't show every model, (grade).

You have a 25tX four, I have a spread sheet of series 2's that shows the same grades as the series ones. It shows what you get for each model as standard, but that doesn't mean that you coudln't get extras.

cheers

John

  • 4 weeks later...
COLOUR AND TRIM

Exterior Colours:

* Bayside Blue (TV-2)

* Sonic Silver (KR-4)

* Black Pearl (GV-1)

* Lightning Yellow (EV-1)

* Sherwood Green Pearl (DR-2)

* Active Red (AR-2)

* White Pearl (QT-1)

I think there's also a 'midnight blue' (at least S1)? Here are some pic's of a sold one:

7981.jpg

According to Prestige's page it's 'midnight blue', have seen a few others in that.

Correct. The colour codes I posted were for the Series 2, as the last time I updated this I hadn't had a chance to get the s1 colour chart together. SydneyKid's car is the same blue as that.

That particular car is lowered, and looks like it has 260RS wheels on it.

  • 1 month later...

post-35366-1171285621.jpgpost-35366-1171285392.jpgpost-35366-1171285430.jpgHi All,

First post on the forum, infact just joined, or should I shay "long time listener, first time caller" as when I get time I have enjoyed going through the topics, damn imforative.

Anway I have been looking at the Stageas for over a month and I am pretty sure that I am going to go for a 2000 series 2 in RED and have found one in Sydney for a decent price with what looks like everything including the leather seats but NOT the sunroof unfortunately. My question is that the guy has listed 4 wheel steering, is this an option as I cannot seem to find it on any other site ?

My other question, if you will allow 2, is that I am looking for this as a more exciting way to get the family around but I am not a mechanic and it seems that most of you guys are pretty hardcore DIY's. Is this the sort of car that I can own without having to go to a tech course ???? then try a few mods as things need changing ?

Alright a third question, have you had a problem with ground clearance ? speed humps ? bloody parking tyre stops as the vectra always grinds the skirt on these and has anbody looked at adding airbag suspension to lift the body an inch or so for some interesting fast offroad fun ?

Missing my old RF-600R and want something that I can have some serious (but well with-in the speed limit) fun on the old road to Gosford.

Keep up the great forum

Sasquach - sorry for the long post

Welcome aboard, do you live in Sydney?

As far as I know, HICAS (i.e. 4 wheel steering) was only available on the RS Four S (which is a series 2, RB25DET, AWD manual), and the 260RS (basically a Stagea version of an R33 GT-R, with the RB26DETT, etc.)

No need to be a mechanic for these things - they're pretty reliable and if you can't find a DIY thread in here, you'll definitely find someone who can either point you in the right direction with your problem, offer to fix it (or help you fix it), or can recommend a workshop for those bigger problems... Most of what applies to a Skyline also applies to the Stagea.

Hmm, ground clearance - I've never had a problem, but mine is at the standard height (and looks kinda ridiculous). Andy (EGA41T) has had problems, but that's because his car is lowered and has a 260RS front bar on it. It's for sale, by the way, and is a rare factory manual RS Four S. As for air-bags for extra height, the Stagea might have AWD, but it's not a constant 4WD like a Subaru, so apart from some users having a bit of fun on dirt roads, I doubt anyone's gone off-road.

Welcome aboard, do you live in Sydney?

As far as I know, HICAS (i.e. 4 wheel steering) was only available on the RS Four S (which is a series 2, RB25DET, AWD manual), and the 260RS (basically a Stagea version of an R33 GT-R, with the RB26DETT, etc.)

No need to be a mechanic for these things - they're pretty reliable and if you can't find a DIY thread in here, you'll definitely find someone who can either point you in the right direction with your problem, offer to fix it (or help you fix it), or can recommend a workshop for those bigger problems... Most of what applies to a Skyline also applies to the Stagea.

Hmm, ground clearance - I've never had a problem, but mine is at the standard height (and looks kinda ridiculous). Andy (EGA41T) has had problems, but that's because his car is lowered and has a 260RS front bar on it. It's for sale, by the way, and is a rare factory manual RS Four S. As for air-bags for extra height, the Stagea might have AWD, but it's not a constant 4WD like a Subaru, so apart from some users having a bit of fun on dirt roads, I doubt anyone's gone off-road.

exactly what he said lol you will love it i know i love mine its the best car ive ever owned

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
    • The video for the servicing and fuel filter change can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44 One of the main jobs I wanted to do before the car officially went on the road, was to remove the awful looking blue silicone hoses. There's nothing wrong with having coloured silicone hoses, but I realise as I'm getting older I prefer monotone engine bays with a splash of colour on the engine cover(s). I cover this in a lot more detail in the Youtube video, so unfortunately there's limited photos of the process. The intercooler, upper radiator, boost vacuum and upper breather hoses were all changed to black silicone with mikalor clamps. The only blue left is a blanking cap at the back of the inlet manifold and the GReddy pulleys (which will be replaced for stock when the cambelt gets replaced) While the intercooler pipes were off I gave them a quick clean/polish too A before photo I do have a replacement air filter on its way. Fuse box covers were painted blue, they're now satin black Another job on the list while the bumper was off, is to add some mesh https://live.staticflickr.com/65535/54737966256_99b28bfa30_c.jpg[/img] I was hoping to use some thin wire to secure it, but it seems I've misplaced it and the wire I had was too thick to twist easily. I ended up using cable ties for the time being https://live.staticflickr.com/65535/54737131882_c2b7989dcc_c.jpg[/img] Was pleasant to see this https://live.staticflickr.com/65535/54737131627_8b2aab13b3_c.jpg[/img] The last thing to do was to fix the front grill and re-mesh that to match but I ran out of time The Youtube video can be seen here: https://www.youtube.com/watch?v=R4FsF6tgizE&t=23s
×
×
  • Create New...