Jump to content
SAU Community

Recommended Posts

after having a long read through this very informative discussion i decided i would seek the help of this group to help me decide a fitment as i want to get it right as i need to order wheels.

1999 S2 260RS wheel fittment.

size 20x8.5 or 9.0 ?

offset i need help with any sugesstions ? i can order the wheels in any offset i want but i want a fairly even flush look that wont scrub

tyres size 245/30/20

does anyone have a set similar to the above please comment also about how they look.

thanks

I run 19x9.5 +12 with 245/35/19

Go at least 9 inch wide, not 8.5

No rear guard rolling needed. It is tight with 5mm clearance to rear guard and 10mm to rear shocks with 245's

Make sure rims are "A" type at front to clear brembo's.

Type A or Disk A refers to the caliper clearance.

I do not think it is a industry standard, but most Jap brand wheels quote it

Rule of thumb is A suit big calipers like Brembo, B type will suit GTST calipers and Type C will normally only work on the rear with small calipers

It also depends on the shape of the spoke.

I run 19x9.5 + 12 in a type B front and rear and have r34 GTT calipers. My rims only have 1-2mm clearance to calipers. I would not fit brembo's

If they were type A there would be approx 10mm clearance to the calipers. The Type A will also effect the amount of dish/outer rim you see.

Type B will have more dish/outer rim

The main thing to remember is, rim width and offset are not the only thing to consider. Make sure to consider the caliper clearance as well esp on a 260RS

What wheels are you considering buying?

Also find yourself on online wheel calculator

That way you can put in either your stock wheel sizes or mine and compare to the ones you want to buy

The calculator will tell you the increase or decrease of both the inner and outer dimension changes

try this one

http://www.1010tires.com/WheelOffsetCalculator.asp

http://www.wheeldude.com/catalog/product_info.php?products_id=5774&osCsid=a1e4576cc4ab64f7fa9ff1a4839aa460

Can anyone shed some information and tell me if something like this will fit on a RS4-V auto.

Many thanks

Joe

Sorry, yeah she is an auto.....

I shall start looking at my options then. Around $4k to spend including rubber.

If you have 4 k to spend you should look at getting your rims via Jesse Streeter. I got him to order some Work xsa for me, they custom make them to order at the sizes you want. Mine in 18" cost under $2200 delivered and they are a 2 piece wheel. Then just over 1k for a set of kumho ku31's. O ly problem is waiting near 12 weeks for the wheels but worth it IMO.

no problems running staggered as long as the tyres are EXACTLY the same

offsets sound a tad ghey

i think for rs4s use r33 gtr specs

something like 18x9+12 or 18x9.5+15

www.willtheyfit.com, measure up your current clearances (plumb bob and ruler to see how much inside the guards they are now) chuck in your current wheel specs and play around with offsets till you get something you like

  • 2 weeks later...

Fitted these up last night.

After initial dry fitup concerns they fit sweet, thanks darrinspencer and everyone else for convincing me 19*9.5 +12 will fit a manual.

Its still quite high, but being my daily I dont want to increase camber just for the low yet and kill my tyre life.

My phone camera (and my location choice) is sucking at taking photos of black rims with any detail...

post-45315-0-54378600-1337776397_thumb.jpg

post-45315-0-43072600-1337776450_thumb.jpg

post-45315-0-48273100-1337776608_thumb.jpg

Fitted these up last night.

After initial dry fitup concerns they fit sweet, thanks darrinspencer and everyone else for convincing me 19*9.5 +12 will fit a manual.

Its still quite high, but being my daily I dont want to increase camber just for the low yet and kill my tyre life.

My phone camera (and my location choice) is sucking at taking photos of black rims with any detail...

looks perfect to me

I'll go 18x9.5 +12 too i reckon....when i get my new wheels.....in the distant future

Fitted these up last night.

After initial dry fitup concerns they fit sweet, thanks darrinspencer and everyone else for convincing me 19*9.5 +12 will fit a manual.

Its still quite high, but being my daily I dont want to increase camber just for the low yet and kill my tyre life.

My phone camera (and my location choice) is sucking at taking photos of black rims with any detail...

what kit is that?

what kit is that?

Its all as I got it so I'm not 100%.

I assume the car was originally a Dayz edition as the rear lip and spolier is as per dayz.

The front bar and skirts are series 2 RS260 as far as I know.

My wife calls it the underbite.

I run 19x9.5+12 all round with a 25mm spacers on rear and 245/35/19 rubber heaps of clearance with camber and rolled guards, I could go up to a 255 with out issues but a 265 would propably scrub the suspension.

Or

18x9+30 all round with 25mm spacers with and 265/35/18 these only just clear the suspension on the rear but have heaps of clearance on the front.

PS the ride with 19s is shit house, I can only imagine 20s would be crap.

19inch Volk GTC's in silver.

pcd 114.3

Front 19x8.5 + 30 face 2

Rears 19x9.5 + 24 face 2

do you guys think these will fit 260RS ? providing same size tyres are fitted

just a few pix of my wheel fitment on the Stagea 260RS

Tyres are 235x40x18

rear wheels 18x10 +13

front wheels 18x9.5 +24

im considering selling these wheels also so if you know anyone let me know.

CIMG4560.jpgCIMG4559.jpgCIMG4558.jpgCIMG4561.jpg

Edited by PRIMO
  • 1 month later...

hi guys/girls I've just bought a rs4s manual (just waiting for compliance :O) and looking at a set of wheels.. they are 18 x 9" +20..im not sure how these would fit and what size tyre! any help would be appreciated.

Edited by jwelshy19

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...