Jump to content
SAU Community

Recommended Posts

"It's gotta all around stage 1 performance set" lol someone's been playing too much NFSU! :D

"talked to the police they're willing to let that slide" hahaha

From his main page..

"LOL one of my comps got hacked and destroied so had to get a new one....that one got hacked and destroied....got another one(this one) and my guess is it ain't gonna last to long." Funny that..

"Current Residence: N.W. Custom Motoring, Shinjuku, Tokyo Prefecture or Miyuki Motors Export, Ibaraki, Osaka Prefecture" Sounds like bullshit to me since he says "still been travleing the northwest area of the states soon to be goin to the southern centeral states for work".. sounds very much like he lives in the USA to me.. Japan doesn't have states as such does it?

"Favourite movie: Seven Samurai, 2Fast 2Furious" uh-huh! that explains it!

"Operating System: Windos XP w/ NX nitros cooling system, Twin Turbo Skyline R-33 GTR motor, and 60lbs Boost"

"Favourite gaming platform: PS2 Japanese custom w/ a Kanji vinyl, Red Neon, stage 2 hydralics, NX cooling and NOS purge"

K_S__R33_ID_by_Kuroi_Shi.jpg

Am i the only one who thinks that looks like an R32 (filename has R33)? Is it meant to be a jap cop car?

Edited by cogs
K_S__R33_ID_by_Kuroi_Shi.jpg Am i the only one who thinks that looks like an R32 (filename has R33)? Is it meant to be a jap cop car?

yup... everything about that is an r32.

it's a gtr with cameras all over it to tape it's doings.

deviantArt used to be such a nice place about 4 or 5 years ago, all the people in the design community used to be on there... now its just a cesspool for emo's and msn kiddies and their attempts at "art".

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After using a protractor for an actually accurate assessment of what is required,  and by NOT using my uncalibrated eyeball I worked out I need a 25° silicone bend from the TB ro the MAF, but, my choice was either a 30° or a 23° (23° is a weird spec), so I grabbed the 23° one from Raceworks I also grabbed 1mtr of 3" straight from Just Jap, I needed 350mm, but they only had 300mm, or 1mtr lengths....meh Also ordered a 1/2" hose bulkhead fitting from fleabay, this has a smoothish mushroom looking head (they are designed for below the water line of boats) that will fit inside the bend, the hose bit and threaded bit looks to long, but nothing that a hacksaw cannot fix if required, the hose will then just get jamed on the threaded bit up to the retaining nut Fingers crossed and the unsightly amount of hose clamps will be reduced down to 4 once all the parts arrive 
    • Oil change does not trigger code 21. Code 21 is for coilpacks primary side connection. You can try to clear the code with a battery disconnect, hold down the brake pedal to drain capacitors through the brake lights with the ignition on for 10-15 seconds before you reconnect the battery. I have seen R35 coil conversion permanently cause this code with no ill effects so it might be the resistance it wants to see isn't quite right on one or more coilpacks. Could be inside the ECU, could be the harness, could be a coil. You can test it all if you want or just ignore until the car actually starts misfiring.
    • I forgot you have a Nistune ECU. Use Nistune to do all the tests I mentioned instead of faffing with 30+ year old electrical connectors. You can read MAF volts off that too, there are reference values in the service manual to tell you roughly what it should be in different conditions.
    • No. I think it might be the AFM. Hence the use of the terms "swaptronics", which implies the use of swapping out electronics for the purpose of diagnosis. It's about the only way to prove that a small/niggling/whatever problem with an AFM or a CAS or similar is actually caused by that AFM/CAS/whatever. A known good item swapped in that still gives the same problem is likely to be caused somewhere else. They're all the same. Spraying AFMs with cleaner is an each way bet between cleaning it and f**king it.
    • Oh wow! This might actually work amazingly. Do you know the ratio of the diff? I was told the only thing you need to make sure of is if the front & rear diff ratios are the same. Ours is a 4.083 Thanks!
×
×
  • Create New...