Jump to content
SAU Community

Recommended Posts

Make it as big as you can fit on your land and as high as possible , even if you dont want a hoist in there, its cooler and you can use the height for storage . Minimum 7 mtrs long if you want a bench at the rear .

415 volt comes handy for the hoist , welder and tyre machine .

If you can aford it make it double brick , much cooler than steel ( a lot more expensive though ) and use a sectional door not a roller .

If you need a heavy duty floor 150 mm thick with 2 rows of f82 mesh will do the trick , otherwise 125 mm thick with a row of f82 close to the top .

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

If you use the Merlin motor you wont have a problem.If your opening height is 2400mm,you will fit in a 4WD with a roof rack.

I recommend you use the CSI door,very strong door at a good price,B&D is good but dear,stay away from Steeline,Gliderol and Centurion.Dominator make a good door but expensive.

My garage doors aren't wide enough. It takes precision driving to drive the car in forwards let alone backwards. Misses the mirrors by about 3cm on each side. No way you'd get a wide 4x4 in there.

But I think my garage was designed for one door but instead has brick support down the middle. So it has double doors. It sounds so obvious but give yourself plenty of room either side of the car.

Thats the only thing that shits me about my garage. Oh and also its full of shit now so I can't put my car in there anyway. Don't let your missus use the garage for storage, she'll take it over.

everythings great so far

tho if you cant stretch the budget to 3 phase and a hoist, think about a simple pit. just a hole in the ground that you can comfortably fit into with a suitable lid. gf's old man did that and it works reasonably well

felt a bit hairy fixing a leak in my fuel tank from it tho.. as you have to get somebody to drive the car over you... pretty much sealing you in... with leaking fuel :\ ive seen others with steps leading down tho

Yeah, if I was building a garage I'd want a hoist.

Alternatively, I did see this on New Inventors recently:

Cartar 125 mobile automotive hoist

Apparently its not safe enough to spend a lot of time under the car (its more a panel beater's tool) but you could always use it as a full-body jack to put all four corners on wheel stands simultaneously.

this is my garage me and my dad built. the pics shows it with the frame up. its long finished now.

We bought the steel tubing all from scrap wreckers. The blue tubes are those real thick ones are used to build playground houses etc and go about a meter under the ground, in solid concrete.

The yellow poles are old stop and give way sign poles we bought. the are fully rust proof inside out.

The colorbond sheet i got from auction for real cheap.

we compacted the ground with a heavey duty compacter and i used a truck load or so of yellow sand.

the roladoor i got from the tip, a bit scracthed but a quick paint job made it look like new.

the most expensive stuff was the concrete. i needed two truck loads.

the f**king thing is hell solid and on a doesnt move or leak.

it fits the gtr in and has plenty of space all round. plus a ton of space for my work bench etc.

steve

post-11604-1130896136.jpg

duncan, definately make it as big as possible, spend some time thinking about airflow and light (both natural, and lighting). also definately get someone to come and lay the concrete for the floor as the laying down those pre made slabs sucks and they probably wont stay perfectly flat (plus all the joins are a pain).

like wrxhoon suggested brick would be ideal, but obviously more costly.

3 phase is a great idea too. also i would build a little brick enclosure behind it to put the air compressor in (with some sound proofing) and have it plumbed to two points in the garage (one each side) to save getting tangled up in air line all the time.

also a big strong beam down the length of it is a good idea for attaching a block and tackle to.

running water is handy also.

fridge is very nice but may lead to a poor standard of work during the summer as you may find yourself constantly pissed.

forgot to mension we laid electrical pipiing, and water pipiing for a tap and sink on the side of the garage (out of sight) and the pipiing allows me to have power sockets all around the garage. i had the fridge sorted way before i had even built the damb thing.

the air compressor housing is good idea, mine is in the shed and is loud.

might make a sound proof cabinet for it or something.

was thinking about a engine hoist but i bought a crane instead.

steve

steve

Always liked the idea of the old garage "pit" which allows you to work under the car - If you are building - cheaper than a hoist. Have it set up so that you can cover the hole with heavy duty timbers if you need to.

Pits have long lost their appeal because they are very dangerous , i wouldn't even think of having one in mine . If you want a hoist and you have plenty $ to spare the japs have fully recessed in the ground so you can drive over them as if they wern't there . A normal 2 post hoist acn be had for less than $2000 second hand and they are very handy to have , dont bother with with a 4 post or drive ons , minimum height 3.6 meters . You can install the hoist anytime as long as you have the power there .

i also think pits are horrible. it's like working in a dungeon. so it's not much fun if you get a little claustraphobic. also unless you put side access to it can't easily get in and out (means you always need someone there helping you). plus I much prefer a nice flat, clean floor. makes it easy to clean spills and easy to find sh1t when you drop something.

do i need to post up that report on jack related deaths again??? lol.

2 post hoist is definately the go, but for a home garage a big beam with a block and tackle will do the job too if you prefer more flexibility and more floor space. hoist and block and tackle is better though :P

This may sound stupid but if you fully work on your car I'd suggest putting in a gutter around the whole outside. I'm not sure if that's what you call it. Make sure it doesn't run straight into the drain though (a catchment or something?) so you can degrease and clean the floor.

The cement should be the shiny stuff so you can clean it.

Pretty obvious :\

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...