Jump to content
SAU Community

Recommended Posts

Hey guys, i just replaced my standard rb20 injectors with gtr ones, had to take 35% off the overall fuel trim on the wolf 3d so it wouldnt blow clouds of black smoke, the af ratio on the apexi turbo timer reads 13-1 with a 4000rpm jab of the gas, dont no how acurate it is but. Would you just drive it nice and easy to the dyno or pay the $150 to put it on a tow truck, thanks.

Link to comment
https://www.sau.com.au/forums/topic/94068-drive-or-tow-it/
Share on other sites

If it starts and runs, and seems to drive o/k, then driving it will not do any damage AT SMALL THROTTLE OPENINGS.

If it is dangerously out of tune, you will know because of the stalling, hesitations, missing, or jerkiness, and it will let you know something is desperately wrong. But even then it will not damage the motor unless you really thrash it.

It is like running out of petrol. The car coughs a bit and stops. You don't melt pistons, break rings, or burn valves just because you run out of petrol.

Take it real easy, and it will be fine.

Link to comment
https://www.sau.com.au/forums/topic/94068-drive-or-tow-it/#findComment-1699899
Share on other sites

  • 2 weeks later...

i would drive it

BUT - keep it off boost. I had to do the same sort of thing when i changed my afm's and injectors, amongst other things. Added enough fuel so it idled and ran, but i kept way off boost. God knows what would have happened with an untuned pfc, larger injectors and some boost

Link to comment
https://www.sau.com.au/forums/topic/94068-drive-or-tow-it/#findComment-1736317
Share on other sites

thanks guys, as this was replied to again i thought id let you no that it drove fine. when the turbo started to spool it was blowing a bit of black smoke so i took a fraction more fuel out and just drove it nice and easy.

Link to comment
https://www.sau.com.au/forums/topic/94068-drive-or-tow-it/#findComment-1738111
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
×
×
  • Create New...