Jump to content
SAU Community

Recommended Posts

hi guys

had my first bad experience when it rained in melb yesterday, was taking a standard turn around and roundabout at about 40km/h (not accelerating) and the back end totally drifted and almost put me off the road, lucky i was taught how to correct shit like that but anyways i was extremely surprised how easily it lost tracktion, i think its probbaly i have shitty tyres, they came on the car and are brand new but i dont think they had the fact that it rains in the world when they designed them as it doesnt seem to hold at all in the wet, is this a common skyline problem or just my tyres ? if so what tyres would you guys recommend, im a newbie driver and i dont do anything stupid,i'd just like to be able to not hold up traffic going half the speed limit when it rains :) i wanna be able to trust my car in the wet if yas know what i mean

Link to comment
https://www.sau.com.au/forums/topic/9561-skyline-handling-in-wet/
Share on other sites

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

I'd definitely take a look at your tyres there! It should be doing it at that speed without any acceleration.

It can also be about clutch control..you have to be a lot easier in the wet and let the revs out slowly. Can be hard with a very in/out clutch but it can be done. I'm still learning mine a bit after a couple of months.

poor guys with only 2 wheels driving your cars

Well it makes us learn how to drive properly! The amount of WRX that get invovled in accidents because they shove it around corners in the dry at xxx speed, and then when it rains - slide.. "oh it never did _this_ in the dry..what do i do"...crunch!

my tyres are absolute shit... i take off from the lights in second gear and they spin and my clutch control isnt the issue and u can forget 1st gear launches... i took a corner with no feet on any pedals at about 30kmh and it slid out and i ended up in the other lane (my ass end did). this corner is something u should be able to take at at least 50 in the wet its not sharp by any stretch of the imagination

my tyres are ultra grippy in the dry... but as soon as it rains... they may as well be made of ice.

I think all skylines are subject to slipping in the wet. I have almost had about 3 or 4 accidents when i first started driving the line.

I dont think its the wheels. I did a little test with them. I took the wheels off my bros car, which is a V8 and put them on mine, and the car kept on sliding on tight curves at about 30 ks.

I tried my brothers car and it stuck to the ground at about 45 ks.

Does your car have abs?

If so, has it ever saved your ass in the wet?

If so, learn to brake properly and pump the pedal rather than jamming it.

Get my point?

Besides, I'm sure 4wd drivers will agree with me here. Boosting in the wet is hella fun when all 4 wheels light up.

Originally posted by predator666

Well it makes us learn how to drive properly! The amount of WRX that get invovled in accidents because they shove it around corners in the dry at xxx speed, and then when it rains - slide.. "oh it never did _this_ in the dry..what do i do"...crunch!

Originally posted by poyz

real men with money drive 4wd skylines (of the gtr variety)

real men who are poor can't afford 4wd skylines.

well that explains why u drive a GTI-R not a GTR bro....and Gtr skylines aren't technically full time 4wd if u wanna get into details atessa baby rear wheel biased :rolleyes:

That's funny, last I checked this thread was about driving 'Line's in the wet.

Now, consider this scenario. A GTR driver boosts it in the wet. Looses traction. Fronts wheels kick in right. Effectively making them 4wd.

GTS-t driver boosts it in the wet. Goes sideways and hopefully kills himself because he's an idiot and knows his car will obviously loose traction.

So, all in all. Yes, I know they're rear biased. But this is wet weather driving in a Line. They front wheels will obviously get torque transfered to them.

As for me, I enjoy boosting it in all types of weather.

One more thing.

If I wanted a skyline I would have got one. Even over two years ago when I got my car these GTS-t's were about as common as a Commodore/Falcon around Melb. And over two years ago, I couldn't afford a GTR, I was still studying.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even with no BOV you will have issues unless the MAF is a hot film type like the R35 which has some design features to deal with reversion. Hot wire MAFs are very sensitive.
    • So i just change the (whatever is inside ma original MAF and slide the R34 MAF (it is gonna fit right in? ) and somewhere on the hot side a BoV...i presume that would be vented to the atmo? I just "trying" to understand...maybe my mechanic would know this   I would not mind(even prefer) to run stock BoV cuz it is way more than fine but i do not have that and only pipeing what is left is oem J pipe ... I will be running Blitz fmic(to fit oem one side style) and i gonna need custom pipes cuz i do not have rest of those pipes and hoses... But i am want standalone ECU. Only choice i have atm is Nistune...but that is not gonna cut it right?I dont know what Nistune can and cant do... I know you guys know Link and Haltech...but whatabout ECUmaster? I know guys in here run those but i literally do not know about that and do not know differences... Just know to take whatever "my" tuner can work on.  
    • Is that the blue one rpm?  
    • Update 2: Today I'm f**king pissed. Some of you probably saw my thread that I opened shortly after joining this forum, "urgently need expert/experienced opinion", in which I discussed the possibility of a porous RB26 engine block which I also found hard to believe. Currently both turbos are out since the shitty braided line that was installed by whoever fitted the GT28 turbos leaked oil onto the exhaust. Today while working on the cam covers to put new gaskets and half moons in, I cleaned the side of the engine block with brake cleaner. Some time later I saw that it was still glistening with oil or coolant so I dried that off. But it was wet again shortly after. Verdict: I'm royally screwed. What you can see here (hopefully, despite shit resolution), circled in red, is a crack above the turbo oil feed. Extent is a few cm long and basically goes from #3 cylinder wall to #4 cylinder wall. It slowly lets coolant through, even without any pressure behind it. I am absolutely dumbfounded as to how this crack even formed, especially since it isn't along the cylinder as it usually is but rather a horizontal crack. Probably a few cm in length. Not sure on how to deal with this issue right now. Most likely, the only true fix is a new engine block, and even a relatively well done temporary fix requires at least a full engine teardown. Neither of those really fit my timetable right now, the car has been in my buddy's garage long enough as it is. I'm open to suggestions, but I'll be looking into ordering a new 05U block soon so I have one ready for the coming year, or whenever the current block inevitably fails fully. (Most likely once the crack reaches one of the frost plugs) I think it'd be a waste of money and time to rebuild the engine with this block. Oh and I found a rust hole on the side pocket of the trunk, which someone covered up with sealant goop, a piece of number plate and bodywork filler. Fun times. So far for every issue we fix we just find a new one that is arguably worse.
    • I have not found this no. I put one back on a couple days ago with no drama. I agree they are tight, but no need to remove anything. 
×
×
  • Create New...