Jump to content
SAU Community

Recommended Posts

--------------------------------------------------------------------------------

This is how I see it, if you are lucky enough to have a ten second car & you want to run it at the drags & have it road legal in NZ( IS IT THE SAME IN AUS) you can't= ten second cars have to have I full cage= cars with cages have to have a low volume cert before they can be woffed= you can't get a low volume with a cage in the front & bolt in cages are no good for tech inspection so you can't take it in & out to get a wof !

as for a nine second car ( yes I know that's a big call ) it has become even tougher in a GTR because you have to have to have a steel bell housing, unfortunately gtr boxes including hollenger & giken sequential' s have alloy bell housing's & you can't just change the bell housing to steel because it also incorperates the gearcase, imagine the cost of a custom made job- fark

ANY GOOD IDEA'S ?

Link to comment
https://www.sau.com.au/forums/topic/95698-you-have-a-ten-second-car-hard-luck/
Share on other sites

i thought you just have to have a shield around the bell housing. so the existing alloy one stays you just create a shiled around it. perhaps even allowed to run a ballistic blanket in place of that? but yes having a fully street legal 9 second GTR will be tough.

--------------------------------------------------------------------------------

This is how I see it, if you are lucky enough to have a ten second car & you want to run it at the drags & have it road legal in NZ( IS IT THE SAME IN AUS) you can't= ten second cars have to have I full cage= cars with cages have to have a low volume cert before they can be woffed= you can't get a low volume with a cage in the front & bolt in cages are no good for tech inspection so you can't take it in & out to get a wof !

as for a nine second car ( yes I know that's a big call ) it has become even tougher in a GTR because you have to have to have a steel bell housing, unfortunately gtr boxes including hollenger & giken sequential' s have alloy bell housing's & you can't just change the bell housing to steel because it also incorperates the gearcase, imagine the cost of a custom made job- fark

ANY GOOD IDEA'S ?

You can run a welded four point bar instead of a roll cage, good down to 10.000. You keep your Holinger gearbox and use an SFI spec ballistic blanket. Problems solved.

you obviously haven't been to VIC then. as long as you aren't caught driving an illegally modified car on the street, you can re-register the car without ever having it sighted. Technically meaning it only has to ever be inspected once in its life before becoming a purpose built track car. Just make sure you pay your rego every year (none of this blue, pink, green, orange and purple slip crap like in NSW) and you've got a "street registered" top fuel drag car with number plates, rego sticker and the paperwork... who cares that it was once registered as a VW beetle.

"fully street legal"

That's a tough one, I am looking out over a ~40 staff car park and I reckon 90% of the cars aren't "fully street legal".

Several of them have illegal tyre depth

Quite a few have non OEM tow bars

Lots have non standard wheels

Half a dozen have non OEM roof racks

A couple have non genuine mud flaps

All the Commondoors have at least one brake light not working

A few have non OEM mufflers

A couple of the utes have non OEM roll bars

Two have non OEM spoilers

All of the 4wd's have non OEM bull bars

etc etc

In fact, if I looked really hard I reckon I could find something not "fully street legal" about almost every car in the car park. That's the real problem, one man's "legal" is another man's "highly modified".

:( cheers :(

You can run a welded four point bar instead of a roll cage, good down to 10.000. You keep your Holinger gearbox and use an SFI spec ballistic blanket. Problems solved.

Hmm. Intersting MrBlonde. I'm currently contemplating cage construction, and I like the sound of that.

Explain when you have a moment?

Cheers

Sean

Hmm.  Intersting MrBlonde. I'm currently contemplating cage construction, and I like the sound of that.

Explain when you have a moment?

Cheers

Sean

Sean, it's right there in the rule book. You can run a four point rollbar instead of a six point cage, in a sedan down to 10.000.

RTA and highway patrol are much more accepting of a rollbar than a rollcage.

Sean, it's right there in the rule book. You can run a four point rollbar instead of a six point cage, in a sedan down to 10.000.

RTA and highway patrol are much more accepting of a rollbar than a rollcage.

Excellent. I shall consult my rulebook.

Thanks :rolleyes:

Sean, your car isn't street registered anyway is it?

Why not go the whole hog, there's a 9 in that thing of yours anyway with a decent launch (or so close you'll chase it anyway), why do it by half and then have to do it again.

That's a tough one, I am looking out over a ~40 staff car park and I reckon 90% of the cars aren't "fully street legal".

Several of them have illegal tyre depth

Quite a few have non OEM tow bars

Lots have non standard wheels

Half a dozen have non OEM roof racks

A couple have non genuine mud flaps

All the Commondoors have at least one brake light not working

A few have non OEM mufflers

A couple of the utes have non OEM roll bars

Two have non OEM spoilers

All of the 4wd's have non OEM bull bars

etc etc

In fact, if I looked really hard I reckon I could find something not "fully street legal" about almost every car in the car park.  That's the real problem, one man's "legal" is another man's "highly modified".

:P cheers :)

And the Police/RTA/powers-that-be will still yank the import/sports car/insert name of favorite car brand here because it's got a boost guage or something equally criminally outrageous in sight...

Where are the Rozzers when the early model Fawd/Commondoor with all the above listed "features",full of rust and an unrestrained child peering out the back window at your 'Line roars past(hole in the 'zorst,y'see)at 130 kp/h an a 100 zone as you try and do the right thing to stick to the limit for fear of the rubber glove treatment?!?

Sorry...got a bit carried away...Rant over!

Sean, your car isn't street registered anyway is it?

Why not go the whole hog, there's a 9 in that thing of yours anyway with a decent launch (or so close you'll chase it anyway), why do it by half and then have to do it again.

Yes she's registered - but is it legal, and do I drive it on the road much? Nooooooo.

I agree-a street legal 10 or 9 second car is practically impossible. Passing emissions laws alone would be the killer-let alone everything else...

Hmm-You're probably right chops. I was having a look at the rulebook last night and I think that a full cage would be wise. Considering the car was far from running at it's potential on the 10.45, and I can't even drive it properly yet, the probability that it'll go under 10.00 is pretty high.

I think that I'll also be going for a parachute mount at the same time so (only 3mph off now) it's all there when I need it-and for when I go to a bigger turbo (seriously :) )

Sean

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
    • To be fair it's the other way around. 300kw is boring in a modern Golf or BMW. They are so competent / well-engineered / devoid of emotion that you have to go stupid fast to feel anything. Whereas the <300kw RB still makes all the right noises and it feels good to drive. Can pull off at the lights with the turbo whooshing and the blow-off pssshing and feel like the coolest kid on the block. Just don't look to the side where you'll see the bored housewifes in their shitbox Yaris/Corolla/Camry that kept up because you didn't go fast at all
    • 300kW is so boring in a Skyline, you'll get spanked by someone's mum's Golf with Alibaba pipes, and an email tune.
×
×
  • Create New...