DaymoR32

PRP have 1 samsonas in stock at special price mate. Get it before it’s too late!!

HFM are currently working on a set of adapters for the 34. im sure some for 32's and 33's will be around the corner https://www.instagram.com/p/Cs0bls6SrBY/?img_index=2

come on then, show us photos!

nice to see a decent bit of effort going into this, have you decided what colour you are going with? or is it a suprise?

brakes look great, i have a similar sized setup on the same wheels (HFM dogbone adapters and 324mm rotors) love how it pretty much fills the whole wheel!

needs more burgers

yeah its ridiculous how cheap they are. and you can get silly power from a stock block

how much are greentop barra's these days? 😆

absolutely love the CS Sportsters. do they drop in easily? plenty of clearance from side of seat to door etc?

That was @Hondakid90 i did about 30-40k's this weekend but fuel tank still has some in, hoping to do a bit more driving this weekend and fully empty my tank. voltaghe is still bouncing between 0.0 and 0.6v at the moment.

And when I say my voltage is erratic this is me sitting in my garage at idle. Wondering if one of them Haltech fuel conditioners will sort that out, or whether it’s an issue with wiring (have a relay running a thicker wire all the way to the fuel pump). IMG_3066.MOV

hey mate, im currently working on this now, i've set up a fuel level voltage so i can see the volts live (currently bouncing around 0.2 to 0.6 volts its very erratic) and im going to drive it till my car literally runs out of fuel. i have 2 jerry cans of e85 in the boot. once empy will take a photo of voltage. then i'll pour 5 litres in and take another photo (this will become my 0 litre value) then i'll brim it and take a photo of voltage again. This means i dont have to take anything out the fuel tank and my readings should be pretty accurate. Will update this thread once i get my readings. I barely use the car so it takes a while to empty a tank but i should only have about 5-10 litres left in it at the moment. using this video for reference -

thats really not a bad price at all, especially as you can spread the purchasing costs over a few items (rather than a big lump sum cost)

Nice, didnt realise someone had released a gearset, was always wondering what people ran with the CD009. Gonna be a really nice build this!

thats just a destroked barra isnt it? 😆

what ratio are you going with for the rear diff?

it even comes in MP1 😆

fixed it for you :)

I do like the look of the new M3 Touring that is coming out though. 375kw with space for your dog and groceries in the back. wonder if there is a way to stick an older front end on it though rather than the coke snorter grilles. Might have to take one for a test drive, and if it really is that good then the skyline “may” go…

Yeah I think I’m going to keep it now, even if it barely gets used I’ll regret it the second I sell it

Been a while since the last update, nothing drastic has changed, i have however added a few more chinese carbon goodies. Gurney flap is the first one:- And then a carbon grille for the front:- House is nearing completion, then i'll hopefully be spending some money on engine, driveline and suspension upgrades!

assuming r32 and r33 ashtrays are the same, if you provide dimensions of the can pad i could draw up and print something for you.

cool, will still be interested in what values you get too though :)

if you are taking your pump out to measure voltage i'll be keen to know what values you end up putting in the IC7. i havent got round to pulling my pump out yet so my fuel guage is always around 40% ha

definitely interested in following this gearbox conversion!