DaymoR32

I dont know who told you that you need to remove stuff from your engine bay to paint it, that is definitely not required. see example below:-

sweet, i'll bang it up for sale this evening then

sweet, i'll download it tonight and see if it works

I'll check when i get home, i donwloaded it on 25th February

what are rb20det ecu's worth these days? i've got one laying around

thats another possibilty as ive only used the latest haltech software!

one more thing that i havent tried, is modifying the dash when its not plugged in. basically load your layout from the dash > unplug > change settings > plug dash back in > send to dash. Maybe that will work....

hmmm, i dont have a haltech fuel sender conditioner in mine. im just taking it straight from the fuel level wire that went to the original dash. I originally had the fuel going into pin 21 as per the wiring diagram but that just didnt work at all and could not be calibrated for some reason. theres sesor and diagnostic for each avi input apar from on avi 4. I really dont understand why its not working when it worked fine on the Racepak IQ3

so is yours saying 100% full aswell? what voltage values have you used for full and empty? and did you put more than 2 columns worth of data in? I've tried having 2 columns. i.e 2.4v - 0% & 0v - 100% Then ive also tried 6-7 colums with 0, 20%, 40%, 60%, 80%, 100% etc It still reverts back to two columns and random values when i click apply

i second this! been following you on insta for a while but i do like to read about what people are building!

the resistor button isnt locked out so to speak. i just change it on the drop down to "disabled" then click apply and its enabled again if that makes sense

Hey guys, Im having an issue with the fuel level on my IC-7 too. I go into input calibration and try to input a range of values say for example 2.4v empty and 0 volts full. i then click apply and it automatically changes these values to 0.924v empty and 0.16 volts full. It also wont let me disable the pullup resistor either. i tried disabling just to see if it made a difference. I filled my tank up to the brim and ive done about 120km's and my tank still says 100% full. so either my car is now the most fuel efficient car in the world or theres something wrong. I'm using AVI input 1 sensor pin 18 with the 90-0 ohm fuel sensor channel. Anyone have any ideas? Car is an R32 GTS-T with a hlatech elite 2500 ECU - which shouldnt really make any difference i dont believe

just put a destroked Barra in it & Samsonas https://62f5fb6a-14c7-4556-8f38-df35dec2dcbe.filesusr.com/ugd/3dc2cf_720f980c4e8d4229b254bf0988dd2b7c.pdf

that looks real nice!

if you are talking in mph im assuming you are british or american? Whats the ambient temperature wherever you are at the moment?

Thanks, it really does make a huge difference!

Been quiet for the past couple of months and haven’t really driven the car much. I have bought a couple of goodies though. First thing I did was buy some wind deflectors. These were more to cover the window trims that are starting to crumble up a little bit. Also gave the car a good wash! Next thing on the list was an IC-7 dash. I ordered it and got impatient so I designed and printed a new surround before I even had the dash in my hands. Happy to say it fit perfectly first time! I’ve only tweaked one layout soo far. Need to figure out how to get the fuel working (it worked on my haltech/racepak iq3 street dash so I’m sure it’s just a setting that I’ll have to tweak. Really happy with how it looks though, looking forward to having a needle to read for speed rather than numbers! And the ability to fully customise layouts. Will have a proper tinker over the weekend. Anyway, enough chatting, here’s the photos...

are AU's in the 6 figures now? this damn covid tax, its gonna be cheaper to buy an R34 than an AU soon!

just go all out and buy a titanium key https://roninimports.com/product/nismo-titanium-key-n2/

that book rings a bell, i think i referenced it when doing my body styling and CFD module at uni back in 2010!

First draft cup holder knocked up, also has a slot for a phone aswell when a cup isn’t in the slot. Just need to tweak a few dimensions and print settings but I should have a better version drawn up and printed tonight.

I'll be drawing some cup holders up tonight, been working on this 52mm ashtray gauge holder over the weekend. (Hence the orange filament - that my prototyping colour). need to tweak the angle to be more focused towards the driver and a few other tweaks but she’s 90% there. once up for sale I’ll share the details on here or a new post.

cool thats good to hear, im holding out for some oem plastic ones, but may have to bite the bullet and get fibreglass!

imagine having the first AU fronted Ferrari in America. i think instagram would collapse with all the likes.

so you've gone from Ferrari's and AMG's to a Honda Beat, i've just googled one and been sick in my mouth.