r33cruiser

yes it does work for s2 r33's. but u need a voltage changer thing or something. it is in the emu thread....y dont u have a look

the aac valve goes on the underside of the plenum. i installed mine about 2weeks ago...but still has not started. now the injectors dont work :S. all i can say is make sure u tidy up the hoses under the plenum...it can get a bit messy under there. also with the join to the fmic pipes i had to use a very sharp 90-120 degree silicone joiner. thats because my pipe runs through the side of the bay...and not through the washer bottle.

thats the one f**king nice

pm sent

YES. it has a automatic mode adjustment

redo the alignment man., and tell the operation to get the f**king thing right. they just look at it and say "she'll be right, looks straight" and u are the result. a wheel alignment requires the steering wheel to be centred along with the front wheels. obviously you have been ripped off. its happed to me aswell. GO SOMEWHERE else and get it done properly.

hmmmmm i like r34 GTR's. especially jap spec ones filled with dogboxes, twin plate clutches, electronics galore . wat do u think mitch?

i just checked my voltage to the injectors. i am getting about 6-8volts. is this right? should it get more?

cheers nick. looked at it, and it is fine. the car starts up for 1-2sec but then dies. and smells rank..the same smell when it is super lean. also the fuel pressure is a constant 60psi and the pump is working. there is fuel in the fuel rail, but it is not going through the injectors into the engine. this leads me to believe that the injectors, or injector electrics is the problem. but cant find a solution...

dump pipe and turbo are now sold

are u still getting fuel and spark? btw. 270cca is REALLY small/low

YES. if all else fails. go to repco and buy a EL falcon 3wire one. it is a direct replacement for $75.

+1 with 280 duration cams. your power band would be pushed closer to the redline. this is not ideal on a drift car which loves its lowdown torque.

umm yea. i have just done this to my ride. now the car cranks but wont crank over (stay on and idle). fuel seems to be getting into the fuel rail but not into the injectors and into the engine. when the engine is ON, the pump wirrs and the fuel line goes tense...but u dont hear the hiss of the engine sucking up all that fuel.. multimeter was used and i have a circuit to all injectors...and i also have power to all injectors. has this happened to anyone else....and what did u do. p.s. i have checked all my hoses and electrics

YES MAN SWAP. man. LOVE THOSE THINGS. screw the skyline, move it up a knotch

i disagree. when i fitted my rear strut bar. chassis roll was substantially lower. that was my experience

agreed

no dude. just 3 gauges mounted in a 3 gauge holder in the din pocket. not like that, not 1 unit. but it can get bright at night. so make sure u hook up the wire to the lights, so it dimms when lights are turned on

DONT DO IT MAN. i bought one off ebay. it didnt fit, it had to face backwards, which would not fit.. i went with a NISMO front strt bar with brake stopper and a NISMO nissan rear strt bar. BEAUTIFUL wen used with bilsteins. flat as a tack sliding around corners

wouldnt u also have to fork out for driveline modifications...or would it just fit straight in?

ummm yea dynamix that is the norm now. me and mates go on 2hr 'runs' towards kenilworth bi-weekly. awesome twisties.

have u tried resetting the ecu? other than that, it is the timing. GET A GOOD REPUTABLE SKYLINE MECHANIC to look over it and adjust it.

i would be unsure of how u could BUY a turbo if u cant one have one?!?! and even if u deturbo it and replace piping and electronic, what are u going to do about the VIN? and the other ID plates?

cheers r334door for that bloke on suger road. i pulled in and there were about 6 highly modded cars with engines just staring at me. every engine had HUGE turbo's with gaping bellmouths. and they were in old celica's and shit. BLEW MY MIND!!!!!!!

FEB 17TH which works perfectly for me. no way was i going to be ready. im sure some of u are in the same boat