cmoney

FS NSW - CP Pistons 86.5mm to suit rb25 Hi all For sale, brand new set of CP pistons to suit RB25, 86.5mm bore. I picked these up by mistake with some other bits for my RB26 build, but they are the wrong make for me. This set is SC7308 as per pic, specific to RB25. Pistons only, no rods for sale. Some pins have been opened for inspection & trial fit only, never installed or run in an engine. Asking price $1000. Price is pretty firm, the cheapest I've personally seen these advertised for is $1320 brand new for the same set. Can meet / deliver around blacktown / 7 hills area most weekends, & potentially late on some weeknights. Local pick up only, not able to post around work. PM me on here or sms 0407 896 339 for any info. Cheers

BUMP open to swaps for a cheap track gtr

BUMP possibly also keen on an RB25/26 powered cefiro / laurel or R32 GTS-T, maybe even an r33 or r34 for a swap closer to same value throw me some offers & see what catches my attention

post is a bit old, not likely still available....

post is a bit old, not likely still available....

also would be interested in RS260 stagea, or possibly even GTR with blown engine throw me some offers, worst i can say is id rather keep this beast

EOI Trade - 290kw JZS147 aristo 2JZ for GTR 32/33 Wanting to trade my single turbo JZS147 aristo for a lightly modified R32/R33 gtr in Sydney. Or even sell outright if someone is interested. Not massively fussed on colour, just a clean body with no rust & light modifications is mainly what I'm after, only wanting a weekend street car for now, as the aristo has been for a few years. Reason for trade is i have no need for the big 4 door, i miss driving manual as my daily is also an auto, & all my spare bits & pieces are for an RB26, not so good for a 2jz. Quick specs list: * 1995 S2 in black with leather interior & factory sunroof, factory LSD, cruise control * Rego valid until September 2017 * shift-kitted auto gearbox with trans cooler & factory converter * 2JZ with single Garrett GT3582 turbo making 286kw at the wheels on 18psi * Apexi Super AFC piggyback on standard ECU Turbosmart eboost street boost controller (set to 15psi low & 18psi high boost) 19" work meisters Veilside twin 3" exhaust * adjustable fuel pressure reg with gauge in engine bay * I'm sure there's a whole lot more I've forgotten here Plenty of work done, this is a quick car even for its weight & size. Traction control is there for a reason. I've had this car for the past 3 years now, had a lot of maintenance & servicing work carried out to bring the car back up to a reliable level: * radiator replaced approx 12 months ago * lots of seals replaced as it was leaking oil in a few places (no longer), these include front & rear mains * turbosmart 40mm external wastegate installed & plumbed back into exhaust - approx 12 months old * turbosmart bov fully plumbed back - approx 12 months old * Apexi Super AFC & Turbosmart eboost installed as part of upgrade works roughly 12 months ago Car value is being listed at $13K neg, I have roughly 10K in receipts alone for work carried out in the past 2 years. I can add cash on top for a tidy GTR up to a certain point, or I also have a road bike which I can throw in to increase the value on my side. Please PM me on here, or msg 0407 896 339 for further info, questions or offers. Cheers, Chris

interested in swaps at all or just straight sale??

where about you located?? i have a few sets of standard rb26 pistons

been a while, still available??

here's the cefiro for the moment before work begins. initially il probably freshen up the old rb20 from my skyline & get it back on the road with that, while i build the 26/30 for a transplant at a later date. it's an ex drifter so probably got a few things to change for road use

ah gumbi, $100 for the pair. cheers, had a feeling id missed something....

Selling standard set of GTR turbos (ceramic turbine wheels) completely bare, no actuators or exhaust studs, turbos only as pictured. Came off standard running engine, minimal shaft play, unknown kms traveled. Have been in storage for a while. Reason for sale is I upgraded turbos before using the engine these came on, & needed to reuse the actuators & studs from this pair. Turbos come exactly as in the picture, these are the physical units advertised. Located Northmead NSW, but I frequently travel between Penrith & Richmond, so can potentially deliver anywhere around there if needed. COD for pick up or delivery. Any questions, please PM me directly. Cheers

i think luke will be in also (calsonic14u)

better count me in for the local meet

i wanted more power too, so i stuck an rb26 in mine lol. its about to get a LOT more power but with the rb20 150kw was good for a daily, plus it had over 200,000kms by the time i pulled it out & never missed a beat. i was happy for the compromise with my uses. next il be rebuilding it to put into a cefiro i picked up, so we'll see what numbers it can make then

150kw isn't a bad figure at all, i was getting 145kw with an old rb20 & standard rb20 turbo on 14-15psi with an upgraded fuel pump & splitfire coils, it's pretty fun to drive even at this power level hey

ok so more detailed update after much time absent from the build thread found the cause of the throttle sticking open....some little japanese bastard shoved a shirt in the intake that nobody ever saw, even after checking on 5 separate occasions prior to connecting cooler piping. i say some little japanese bastard because there's no way humanly possible either fatz or myself could fit in this tiny excuse for a shirt lol fitted the 18" rims with wider rears aiming for better traction once the beast is running again retrofitted an r32 GTR 320kp/h speedo to my already retrofitted gtr cluster picked up an rb26/30 with the intention fitting the entire motor in place of my old sick rb26, but now thinking il just use the head which has been freshened up with 270 degree cams & several other good bits & pieces, then save the 3 litre bottom end to use with the original rb26 head for my cefiro when i get around to starting that (too many projects at once). picked up some schmick flashy hks cam gears to help dial in the 270 degree cams when the rb26 is alive again too also fitted a pair of turbosmart BOV's while things are all in pieces 1 last addition, not really noticeable with everything fitted to a motor, but the new turbos are now HKS 2530 items rather than the N1's, il probably keep them & rebuild them for an RB26/30 motor for the cefiro later in life cheers

if you separate the motor/box from the shell for sale, i want 1st dibbs on the motor & box for my cefiro

ok found some seats, now chasing a pair of seat belt buckles that are attached to the seats to suit cefiro, the ones that came with the seats arent suitable.

if the seats mount the same as skyline coupes il be up to haggle with you on them

still after rotors?? i believe i have a spare set of all 4 from an r33

PM sent j-plus, cheers Ok this is the seat im trying to match if possible

Hi all I'm after a single drivers seat for an A31 cefiro, western sydney pickup ideally. I will get a pic of the passenger seat I'm trying to match it with. Please PM me directly or msg 0407 896 339. Cheers

pm sent