Search the Community

Hi, as topic states, I'm looking to purchase a GTR front bar to suit my R32 skyline gtst drifter, so it doesnt need to be flash. In fact, the cheaper the better. It can have some damage as long as its all one piece. let me know what you got! Im located in Sydney west, 2165

Hey everyone I'm chasing a front bar as the title says. I'm in Perth and will be interested in any style but preferably nothing over the top, trying to keep it under the radar. Prefer white in color. Thanks

Hey Guys, So I've searched the forums for similar issues and haven't been able to find much information. I'm currently trying to fit a set of 18x11 +20 Concave Concepts to my Gts-t and have purchased and installed a set of Front Upper Camber Arms to try and pull them in a little as they poke on my Gts-t guards quite a bit as pictured. Although since doing so have run into a few problems. 1. After adjusting the camber it looks as though the wheel sits further back inside the arch towards the back of the car and is now rubbing quite heavily against the guard/sideskirt mount when turning. (I'm thinking caster arms will fix this as I assume the caster is all out of whack) 2. After adjusting the camber the inside of the wheel looks like its sitting over the coilover (above the lock collar for the base and below the lock collar for the spring) and over hard bumps the coilover compresses and hits against the inside of the rim. 3. At full lock, or close to, the inside of the rim rubs up against the upper wishbone and makes a horrid grinding noise (I have since notched out the wishbone but apparently not enough because it still does it) I tried fitting a set of 7mm slip on spacers to fix the issue but they pull the wheels out a little too far and create all kinda of rubbing issues on the guards. Has anybody had any similar issues, or have any constructive suggestions/can help at all? Thanks.

looking to buy a r33 gtst series 2 front reinforcing bar. Open to any price within reason. contact number is 0430442658. thanks.

Hey guys, so I'm trying to decide which front bumper to go for on my R33. Right now i have a JUN front bumper, don't know if i should stick with it or change. Some of my choices were the 400R front bumper, Do-Luck, or Top Secret style. Or, i could just go back to the stock bumper.. haha I know its personal preference, but just wanted to get a general idea of what will look nice. Thanks guys, any help appreciated.

DIY Painting Front Grill Hi all I painted my front grill matte black and it looks quite nice on white skylines. If you want to try it out, I hope this DIY guide helps you out! Tools needed: 12-15cm flat head screw driver Some newspaper or cardboard Dish wash liquid Sponge Paint (I used 1/3 or less can of plasti dip) Step 1: Removing the front grill You will need to remove all the pins holding the grill using a flat head screw driver. To remove the side lock pins (circled in red in the picture), insert the flat head screw driver and turn the lock pin inside clockwise to release it. This video is very helpful too. You do not need to remove the pin circled in green. Please refer to pictures for further details. Step 2: Remove Nissan badge and wash grill Even if you want to paint the badge, I still recommend removing it so you can paint the curvy parts better. Using dish washing soap and a sponge, wash the grill. If you have a bath tub, it is every better. I used warm water. Note that I put the plasti dip can inside the warm water too. This is to melt the rubber inside or make it softer so when you spray it, it is much finer and the finish is better. Dry it using a microfiber cloth. If you want, you can use hair dryer to dry hard to reach corners. Step 3: Painting Put the grill on top of some newspapers or a cardboard like I did so you do not mess your floor (I over sprayed a bit lol). When you paint, spray around 20cm from the grill and start and finish each spray out of the grill. I applied 4 times in an interval of 25 minutes. Let it dry overnight and put the badge back on. Step 4: Put the grill back Seems straight forward but I struggled 3 minutes to figure out how to put it back. You will need to take the lock pin out from the hole and attach to the grill first. Then you can slide the grill back and put back all the lock pins and you are done! Next project is restoring headlights!

Silver Front and Rear Bumpers off a 2 Door Coupe V35 or G35. Mint Condition, comes with Front Grill, Badged Nissan, Oem Plastic, No cracks and comes with Foam Support Bars Front Bumper $250 Rear Bumper $250 Located, Tascott NSW 2250 Willing to Post PM or Text Msg Anytime 04049212EightSeven

Selling my R34 GTT bumpers as I no longer need it. Front bumper : Orignial color is white. But primer coated for a paint job. Incl air vents. Small bit cut out for intercooler piping $120 Rear Bumper : White $150 Located in Mill Park, Melbourne. Pick up only as I'm not in Melbourne atm. Drop me a text if you are interested 0434143021 Photos not available atm sorry.

Brand new Super Pro Bushes, bought them for my R34 GTT, but not going to install them anymore. SPF1202K - (RRP $74.06) Front Strut Bar To Chassis Mount Kit SPF3153K - (RRP $102.60) Front Control Arm Upper-Inner Kit SPF1811K - (RRP $181.06) Front Control Arm Upper-Outer Eccentric Kit SPF1483k - (RRP $155.00) Front Control Arm Lower-Inner Bushing SPF2681K - (RRP $41.39) Steering Rack & Pinion Mount Bushing Kit SPF1750K - (RRP $74.46) Rear Control Arm Lower-Inner Bushing SPF1638K - (RRP $81.82) Rear Control Arm Upper-Inner / Outer Kit RRP is based on GSL Rallysport, and it comes to a total of $710.39. Willing to let them go for $660, as I don't really want to separate them. Check http://www.superpro.com.au/ for more information, to make sure it fits your car. Pick up from SE Melb or posted at your expense.

R33 Front Bar Indicator Pair Good condition Picture only shows one, selling as pair. $80 Cheap bargain Pick up in Oakleigh Inbox me for details

ITEM: Nissan Skyline R33 GTR Series 3 front bumper bar freshly reconditioned ready for paint. Comes with vents and blinkers but not the nostril ducts. CONDITION: Reconditioned - like new and ready to be painted LOCATION: Blacktown (Western Sydney), NSW PRICE: $1,400 CONTACT: PM or call O4O4.193.556 PICS: will upload over the weekend Will separate: front bar $700 lip spoiler $800

Hey guys. I've been on the lookout for DR30 rear calipers for my own build. I stupidly imported the wrong ones... So for sale I have a front pair of DR30 RS Turbo brake calipers (I believe are upgraded from the standard R30 gear?). They come with all the new seals, pads, copper washers etc to overhaul them entirely. They are fresh imported from Japan with the fancy Japanese newspaper. I paid $150 to get them to my doorstep, I'm asking $100 + postage to wherever in Australia. (Est $15 for Eastern states) You can contact me via PM or text/call me on 0401 169 265 Cheers.