Jump to content
SAU Community

Recommended Posts

Thanks for the info mafia .. do the garrett gt3071 turb need new lines too ?? i have a stainless manifold... but i will need to get a new one for the external wastegate if i go down this path..

thats exactly right - GCG highflow is the most cheapest upgrade ($2k) and it bolts straight back on, no adjustment to oil or water lines.

2530, you'll be spending $300 on oil and water lines, and lots of time and stuffing around... I've been there and done that, pain in the ass.

If I could do it again, I'd get a high flow. But, I can't do it again..

unless the kit specifically says that the turbo will use all standard RB25 oil and water lines then yes.

ALL non RN25 turbos need new water and oil lines, except for the kits the specify that they will use the existing factor ones - which are rare as f**k.

i thought i would quickly check with yall first...

i have a 33 with ems cooler exhaust new turbo manifold etc..

and want to upgrade my turbo... i have decided on a Garrett gt3071 with .63 exhaust and with an internal wastegate....

does this all sound like a good setup ?

Cheers thanks for any feedback

I know a couple of people who have fitted these 3071r .63's to SR20DETS and they suffer from really bad boost creep. One of them is having the internal wastegate modified (enlarged) to try to alleviate the problem.

surely you have learnt something in the last 2 pages of advice and previous topics in the forced induction section.

cheap turbo's are cheap for a reason

ebay turbo's are a no no

mystery (unknown spec) old school t04 combos are lag monsters usually

what do you call a laggy turbo?

one that comes on at 3000?

one that comes on at 3500?

one that comes on at 4000?

one that comes on at 4500?

one that comes on at 5000?

hehe thanks paul i know you get what you pay for !

so a 2530 hks would be a good upgrade on mid to high boost ?? compared to the 3071 ?

surely you have learnt something in the last 2 pages of advice and previous topics in the forced induction section.

cheap turbo's are cheap for a reason

ebay turbo's are a no no

mystery (unknown spec) old school t04 combos are lag monsters usually

what do you call a laggy turbo?

one that comes on at 3000?

one that comes on at 3500?

one that comes on at 4000?

one that comes on at 4500?

one that comes on at 5000?

  • 4 weeks later...

The GT-RS kit, for what it's worth, was a pretty easy thing to install.

Turbo bolts up to the existing manifold and exhaust no probs.

New oil and water lines need to be used (come with the kit) and are also pretty easy, with the exception of the water line at the back of the engine block which is a b*tch to get to.

It's a solid day's work, but will net you 230-260rwkw on an RB25.

Worth considering for what you say your goals are. I imagine they would be pretty responsive on an RB20, as plenty of the SR20 guys use them aswell.

The GCG Hiflows (RB25) all seem to be getting similar power figures.

Edited by Beeble

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mount some of these on your dash? https://www.greddy.com/products/16001720  
    • Given you're running a 2.8 and my 2.5 is not really like for like, I suspect there could be a bit more timing you could give it. What is the kW yield per degree you're putting through it? Here's my E85 map to give you an idea, where it was I could still get another 3~4kW per degree thrown at it.  
    • It turns out that Setrab make a fan specifically for the oil cooler which is great and I've installed it with minimal swearing. I removed my 2x 12in push fans from the front of my aircon condenser and wired them into this. My main thermo fans kick on when I use the aircon anyway and would effectively already be working as puller fans through the condensor which is infront of the rad. The push fans (understandably) didn't really do much in the config they were previously in so now they're out. Now we're on to the "Oil fan doesn't really do much either!". Yes I'll duct it next if it does nothing in heavy use which it shouldn't. But hey, the object exists and fits great and is cool. Let me have this. The car is still in the "do my fittings leak oil now? do my wheels actually rub?" phase. I did a spirited drive on them and didn't hear or feel anything. Then I got back home and noticed there were grind marks on the inside of the rims, though I couldn't see where they were touching I got out the grinder and attacked the suspects. Note: I do not know how to use a grinder. Then I realised I had dragged my new rims across my concrete driveway before I did this drive. I didn't think I had damage at that time when I briefly looked...... but remembered this occurred after I did all the angle grinding. The grinding on the wheels in some very specific spots. It's not around the whole rim for example, which lines up with dragging it across concrete more than hitting a suspension component for even 1 full rotation. So everything is currently painted and taped up and I need to test it some more to see if it really IS rubbing, but from inside the car it doesn't feel like it is. In other news I attempted to do a before and after comparison of the heads/cam upgrade thing. Dynos lie, everything is in different measurements. Here is the data from the sandown back straight. Car go faster than before. Vroom vroom.
    • Here's my base ignition. +3 correction to redline when shooting water/meth which is always on. Looking at my old ignition table, I should be able to add 1-2 degree's next time I'm on the dyno.  Let me know your thoughts. 
    • Given what I know now - same haha, but this was 12 years ago with second hand 740cc Nismo injectors in my S15 daily, I was too busy hunting elsewhere for the issue to even look at the injectors, running through some cleaner was a happy coincidence haha
×
×
  • Create New...