Jump to content
SAU Community

Recommended Posts

hey people,

Im soon to be getting my 1st car in round 5 months or so and cant decide whats better in my situation.

As im still 16 im limited to turbo exemptions and all that mumbo jumbo, i have to stick with the NA's for a lil while.

I've always liked my skyline's but when their turboed. but when it comes to pick over an NA R32 or a 300zx i cant overcome what would be overall a better buy...

Any ideas?

Link to comment
https://www.sau.com.au/forums/topic/100509-300zx-or-r32-skyline/
Share on other sites

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

i think you would find a lot of 32s are in better condition. and i dont know from experience but i've been told by a lot of people that 300's have huge upkeep bills. but i assume that is more applicable to the twin turbos. both nice lookin cars. Non turbo so neither one is going to be a huge power house, so i guess its up to your preferance.

I would suggest the R32 also. Have also heard from a friend that working on the 300 engin is a pain in the backside. Apparently just to change a radiator hose you have to get under the car, or pull off the front end. The 32 is much better to build on and easier to mod when your ready. That would be my choice but it is up to you in the end.

My mate has a N/A targa 4 seater Z32. Power-wise (stock-for-stock) it would easily outdo an RB25DE R32. It pretty much kept up with my car when it was un-modded. Granted the engine may be a pain to work on, but for outright speed + interior go the 300... unless pricing is a concern then go the 32.

Dude

All that b...s..t about 300 is not true.Well one thing is and that is that they are tigth to work with. But appart fromt that they are exellent car to have.Even N/A will pump out 163kw which is pretty cool, will give you alot of grunt and that sex appeal of 300zx that is quite rare. Yeah well they will cost a bit of money to look after if you buy a piece of s..t that cost you say under ten grands.Consider this, 300zx was over 80 grands when new and was aimed at the big fish like M3, AMG and Porsche so that is the reason as why some maintenace tasks will require more money then r32. 300 is a grand tourer, not your average Joe from around the corner.You cant expect to neglect it, mind you if you get a helathy one and believe me ther are a few around if you dont want to bite the bullet and imoprt. Service it regularly look after it , hook up some good exhaust, dumP pipe AND set of filters and you will be on a good path to keep up with some v8, not only that but smaller capacity turbo engines AS WELL. How do i know? Well easy i had one. Last but not the least, do not buy AUTO as reconditioning is very expensive (over $2000) go manual which will give you a rigid strenght box with second to none problems

Cheers

BLACK R

The 300zx is a great car, most of the rumors are rubish. Anycar that has not been looked after will cost you a fortune....

Anyway for $10K forget the 300ZX you will be regreting it, as it probably will need abit of work. I spent $17K on my first 300ZX, it was an Aus spec model, so N/A and 2+2. immaculate condition, I wouldn't pay less than that for a Z or you will most likely get a rubbish car.

Even the R32 will be worn out pretty bad for $10K I recon.

Go for something alittle small first, maybe a s13 or something, and work your way up to a quicker car.

thats my 2 cents....

about 3 years ago now....

but look at it this way, you would probably have to pay something like that for a semi decent low km Z anyway, as they are hard to come by with original km's on the clock.

Aus spec models are your best bet, as they generally have a good service history. If i had to hazard a guess, i'd say every single import has had it's km's wound back.

Aslo, although the aus-spec is almost entirely identical to a jap model N/A apart from some negligable differences, the insurance will be alittle cheaper as well.

Just remember it all comes down to what you pay for is what you get. $10K won't get you a very good condition car.

Alot of mechanics won't touch it either as half of them can't even find the air filter.The mechanics that do work on the Z will charge you a fair bit, but some do a very good job and know thier stuff (insert plug for UAS here).

Nissan will charge you through the nose for parts... best to hunt around for bits online or at the wreckers, or to buy aftermarket bits for it....

Different strokes for different folks.

As has been said, both cars are built for a different purpose. You need to work out what kind of driving you'll be doing and how you like to do it.

ie. you don't buy a Barina to tour Australia and you don't buy a 740i just to get you to work and back, if you follow.

To the guys that have driven/owned the z-cars, is the driver visibility and handling suited to someone learning the ropes? I would have expected poor vis out the rear glass and the zed being a bit of a handful when reverse parking/carparks/etc.?

As mentioned, an N/A S13 might be a good option...? They don't look real flash but are cheap to buy, cheap to run and easy to drive.

I would love a 300zx,

I got a 300zx b4, but that got stolen, now i got a R33, gtst

which is not as dream to drive like 300zx,

The handling in 300zx, and the Torque just outstand the rest.

But yea, 300zx cost more to maintain, If ur still young,

i reckon u should go for R32, or something cheap, coz u dun wana spend too much on maintaining.

300zx do have cramp engine bay, since i have it for 2 yrs,

I have never have any problem with the engine, only top radiator hose broken and its like 5 mins task, the rest, just normal services.

But R33, cant go past that back seats, I can fit 5 ppl in there?? LOL...gosh, never seen such a huge sport car.

To the guys that have driven/owned the z-cars, is the driver visibility and handling suited to someone learning the ropes? I would have expected poor vis out the rear glass and the zed being a bit of a handful when reverse parking/carparks/etc.?

good point cowie, visibility is definatly limited at the rear, so you do need a good feel for the size of the car. I had a stillen type III wing on mine, and that reduced visiblilty even more.

I would say that in general even an N/A model is probably not the best choice for a first car. They are very quick and in the wrong hands very dangerous.

as I said before if he has his hart set on a nissan.... at the price range he is looking for, an S13 or N13/N14 might be a better/safer option... plus your mates fit in the car as well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
    • Perhaps the answer is... more jacks!* *proper jacks must be used.  
×
×
  • Create New...