Jump to content
SAU Community

Recommended Posts

There is too many choices in what car to get!! argh. ive got someoe looking at my car, and im really keen to sell it and upgrade. thats where i get stumped... upgrade to what? while not the best Q to ask on a model specific forum, ill throw it in anyway.

some cars ive been looking at:

1. r33 GTST

2. R32 GTR

3. Subaru WRX about a '97 model

4. Holden VR/S V8 or S/C Statesman

5. Holden VR Senator

those cars ive found to be in my price range, tho some of the r32 GTRs do need a little TLC on them. I also know some are over the power to weight laws of Vic, but the police of my town are fairly lient on the matter, and also i know a few of them from past dealings with them with the family.

Are there any other options i could look into? i dont drive often, i have only managed 4000kms in the commodore over the past 13months ive owned it. and im considered by mates that im a fairly sane/good-ish driver, and i wouldnt mind a little bit of power. im not gunna set time aside as yet to look for test drives, as the VS is still around and finding spare time with my work sucks...

throw some opinions in here id like to hear them.

PS. i think this topic would be useful to most in a similar situation, weighing up options n stuff.

Link to comment
https://www.sau.com.au/forums/topic/100513-im-looking-to-upgrade-my-car/
Share on other sites

stagea rb25 awd, theres a series 2 with neo rb25 and tiptronic auto pearl white in colour in good cond at a perth yard for 19 900 i think ono as well, could get it for 17k i reckon, and its a 2000 model with all options :P

better value and comparable to r34 gt-t's for half the price :D extra wight is the only downfall, but its capable of being practicle for everyday use compared to 2 door coupes.

you wont get a 32 GTR that cheap unless its a POS. a WRX would be very nice i love the older models. And a 33 Gts-T would be hot too. but i wouldnt go holden mate. youl regret it when you see a turbo 6 smoke you off :P

Edited by thrtytwo

yeah, holdens are at the bottom of the list, i will take one for a test drive sometime to get it out of my system i think ;)

am i allowed to post links to other sites? anyhoo...

http://www.imports101.com.au/view.php?car=1462

they are similar to this one

i kinda dont want a 'family' car, tho stageas are cool, i kinda want something more sporty...im not really keen on 4-door skylines either.

there a bp walking distance away with ultimate and all that. and theres 3 other servos around that supply premium. petrol isnt a prob :D the BP here didnt run out of ultimate either when they had all that happen...

lol, sorry Spook's_Skyline but im after a car for me, as im usually the only one in it except on kfc runs. :P

Hows about work out if you want RWD or 4WD, that will make your choice a bit easier. 32GTR would be they way to go, but then you'll have a 89 model, R33's are sweet and newer, WRX are cheap a good but seems as tho you need to be 40+ to have one! as for Holdens unless it's a Manual V8 don't bother, actually just don't bother with them.

And what about a 180sx or Silvia. S14 would be good.

Good luck with your choice!

That GTR is a PIG! If that's what you can afford I would not even consider it. Photos always look better than real life, and there are many things wrong with that car. The dealer claims no rips on seats, so why take a photo of the passenger seat and not the driver's seat :confused:.

Anyway.......

Personally I would go an immaculate R32 GTS-T (preferably with an rb25 conversion :blink: ), an immaculate R33 GTS-T, or the WRX. How about a Subaru Legacy GT-B (twin turbo)

Shameless Plug.............. :nyaanyaa:

If you want something different my mate has a mildly modified Suzuki Cappuccino, for sale. Being sold due to a new business venture, needed a car that could carry goods.

3-cyl, turbo, rwd, hardtop->Targa->Full convertible, 2 seater, small sized car :lol:

Has upgraded Suzuki Motorsport: ECU, Injectors & Turbo.

With a Blitz BOV and hi-flow exhaust system.

PM me if you are interested.

post-1811-1136355858.jpg

post-1811-1136355912.jpg

post-1811-1136356011.jpg

post-1811-1136356059.jpg

Poor guy... go on a Holden forum, and they'll prolly tell you to get the senator and stuff skylines.

Having owned both, the V8's are toquey as anything, but chew through the fuel. Comfortable though, heaps of legroom, glovebox room, boot space... the Skylines have none of that.

Stagea's are nice, but they're kinda big if you're looking for something sporty.

I would have to recommend the R33GTST. You'd get a very clean one for ~20K. Something a little rougher for 14-17K that you've budgeted. It's sporty, fairly economical when stock, and very moddable if you decide to go that way later.

Parts are cheaper for Holdens too... so you have to factor in that sort of stuff, but since you are hardly driving, I don't think it'll be a big issue.

I managed to get my R33 for 13K after a 3K trade in, and 1K discount for the 18" alloys that it had on it.

My second choice would be (and was at the time) an R34 GTT. The 4-door tiptronic ones are around 18K, and if you find one with a factory body kit, they look quite sporty.

lol at the cappucino, what kinda power is that putting out ?

I think 65rwkw, BUT only weighs about 700kg

A typical standard-ish R33 has a power(rw) to weight ratio of about 9.3kg/kw

This Cappacino has a power(rw) to weight ratio of about 10.7kg/kw

So it wont bet a R33 in a straight line, but on the track and motokana's it is a different story (due to it's size and low centre of gravity).

PS: It has only been on the track ONCE, but was overtaking a few typical R33's :lol:

Note: power(rw) = power reading taken from the rear wheels

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...