Jump to content
SAU Community

Recommended Posts

I went for a bit of a spirited run up a windy road in my completly stock, apart from zorst, R32 GT-R. The oil temp got up over 100 maxed around 105. The oil is fully synthetic mobil 1 variety. I was just wondering wat is the maximum temp I should let the oil get to before I should start to worry about bearings e.c.t. Also on the way down the windy road the brake pedal disappeared to the floor which was an interesting experience they came back 15 mins later presumably when they cooled down. Would some exotic brake fluid help this or should I just upgrade the brakes if I continue the windy road drives. :rolleyes:

Link to comment
https://www.sau.com.au/forums/topic/101051-oil-temp/
Share on other sites

When it starts getting over 120 degrees, start looking at oil coolers and with the brakes, yep brake fluid will help & a good set of pads. Try the Motul RBF600 brake fuild & RB74 front pads with comp2 rear pads.

Another thing is don't ride the brakes, what I mean is brake and then take your foot off as any friction will build up heat.

Link to comment
https://www.sau.com.au/forums/topic/101051-oil-temp/#findComment-1844680
Share on other sites

Pick up the phone, dial the freecall number to Mobil and speak to a techo. You should find that a full synthetic is designed and rated to easily withstand 105 deg C temps.

If that's the max you get, little to worry about especially for a road car getting limited thermal loading.

If you want to run track work, oil coolers are an easy way to achieve more consistent temps and reliability.

Link to comment
https://www.sau.com.au/forums/topic/101051-oil-temp/#findComment-1845831
Share on other sites

Trust me it was a very sprited drive up hill with plenty of full throttle accelleration, hard braking then back on the throttle repeatidly for a solid 20 mins. I wanted to find the limits of my driving and the car. The part I love about the gt-r is it is so easy to drive it hard, I very really find myself in a situation where i'm out of control.......so I need more power lol

Link to comment
https://www.sau.com.au/forums/topic/101051-oil-temp/#findComment-1850112
Share on other sites

I am curious about the opposite - How cold is too cold? Curious at what point I need a thermostat on the oil cooler

And where are you guys taking the measurement from?

Look at it this way - the stock oil temp gauge on a GT-R is in the range of about 70 degrees to 150. If you are just cruising along it settles at about 90 degrees. So you would infer that 90 degrees is a good aim point for the oil temp.

Link to comment
https://www.sau.com.au/forums/topic/101051-oil-temp/#findComment-1889790
Share on other sites

Fanging it hard at >120C for a long period is no good because the oil thins rapidly and wouldnt provide an optimum film thickness to maintain good antiwear properties. Anywhere between 80-110C is safe but if your oil is constantly under 60C, or it takes more than 10 minutes to reach 80C, I'd definitely be thinkin about getting a thermostat.

Edited by Busky2k
Link to comment
https://www.sau.com.au/forums/topic/101051-oil-temp/#findComment-1889999
Share on other sites

Interesting this oil temp subject. I circuit race a 32 Gts-t 2.2 with 235RWkw ans using MOTUL 300V chrono 10/40 ($$$) and a heap of Greedy top of line elect gauges, big trust radiator and 9 row oil cooler (originally mounted behind RH guard). First outing last Sept and oil got to 115, water 88. Told this was too high - so moved oil cooler behind intercooler.

Next race (bit hotter day) and different track - oil peaked at 225 and water 100 for most of day.

Before next meet, I heard that up to 130 Ok, so left oil cooler where it was due to lack of time.....but put in some air deflectors - still ran at 125 and water about 95 all day.

About 50ml of oil in catch tank over 3 meets. Oil still looks and smells good.

At "brisk driving" (about 80% on track) oil stays at a steady 88.

Hope this all helps abit.

Kerry

Link to comment
https://www.sau.com.au/forums/topic/101051-oil-temp/#findComment-1892251
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...