Jump to content
SAU Community

Recommended Posts

Hi All,

Advise & Idea is much appriciate....my aim is 11s on my A31/R33. What I have now:

1. Garret GT30 (700177-018) with Tial 38mm

2. Highmount manifold

3. 71mm Throttlebody from Alfa

4. 6x 510cc injector from mitsubishi Evo3

5. Frontmount intercooler from Mitsubishi Evo3

6. 17" x 235 Yokohama street tyre.

Can someone list up the other supp. mod to archieve 11sec.

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/
Share on other sites

drag radial, fuel reg & fual pump will be in hand soon BUT should I change the engine management ?????

I got experience with microtec LT8x on my evo3 & run for 10s. Alots problem on tuning due to the microtec tunner in my place are limited. (400km from my place)

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/#findComment-1849478
Share on other sites

You most definitely do not need 300+rwkw to break into the 11s. Sydneykid has told us about an r34 with 260 odd kilowatts that did an 11.

An r33 is even lighter. I have a friend who is a good driver and on a perfect day, perfect launch etc, he just cracked an 11 with 250 odd rwkw in a 33 gtst on bfg drag radials.

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/#findComment-1849537
Share on other sites

You most definitely do not need 300+rwkw to break into the 11s. Sydneykid has told us about an r34 with 260 odd kilowatts that did an 11.

An r33 is even lighter. I have a friend who is a good driver and on a perfect day, perfect launch etc, he just cracked an 11 with 250 odd rwkw in a 33 gtst on bfg drag radials.

im not saying this isnt possible just that id sure love to see that :P

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/#findComment-1849741
Share on other sites

260kws is pushing the stock internals to their limits (isn't it?) if you want to do it once it should handle it.

I thought the safe limit for a stock r33 bottom end was more around the 280 mark?? with some people living in fear on 300rwkw

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/#findComment-1853145
Share on other sites

lowering the compression is a safe method so the engine doesnt go boom. also im talking about potenza re01, which are very good for drag application....

wtf they are probably one of the worse drag tyres you could use being low profile etc

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/#findComment-1853712
Share on other sites

lowering the compression is a safe method so the engine doesnt go boom. also im talking about potenza re01, which are very good for drag application....

As far as I know it allows you to run more boost safely. It doesnt make the engine stronger..

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/#findComment-1854162
Share on other sites

a stock r33 gtr run 12.8 with re01 and stock evo9 run low 12's with re01 i through they were good street tyres (never said they were good drag radiials) :blink: guess im wrong, so will take back comments :)

and 33SOM, i didnt say it made the engine stronger i said it was a safety method....

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/#findComment-1854377
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...