Jump to content
SAU Community

Recommended Posts

Hi All,

Advise & Idea is much appriciate....my aim is 11s on my A31/R33. What I have now:

1. Garret GT30 (700177-018) with Tial 38mm

2. Highmount manifold

3. 71mm Throttlebody from Alfa

4. 6x 510cc injector from mitsubishi Evo3

5. Frontmount intercooler from Mitsubishi Evo3

6. 17" x 235 Yokohama street tyre.

Can someone list up the other supp. mod to archieve 11sec.

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/
Share on other sites

drag radial, fuel reg & fual pump will be in hand soon BUT should I change the engine management ?????

I got experience with microtec LT8x on my evo3 & run for 10s. Alots problem on tuning due to the microtec tunner in my place are limited. (400km from my place)

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/#findComment-1849478
Share on other sites

You most definitely do not need 300+rwkw to break into the 11s. Sydneykid has told us about an r34 with 260 odd kilowatts that did an 11.

An r33 is even lighter. I have a friend who is a good driver and on a perfect day, perfect launch etc, he just cracked an 11 with 250 odd rwkw in a 33 gtst on bfg drag radials.

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/#findComment-1849537
Share on other sites

You most definitely do not need 300+rwkw to break into the 11s. Sydneykid has told us about an r34 with 260 odd kilowatts that did an 11.

An r33 is even lighter. I have a friend who is a good driver and on a perfect day, perfect launch etc, he just cracked an 11 with 250 odd rwkw in a 33 gtst on bfg drag radials.

im not saying this isnt possible just that id sure love to see that :P

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/#findComment-1849741
Share on other sites

260kws is pushing the stock internals to their limits (isn't it?) if you want to do it once it should handle it.

I thought the safe limit for a stock r33 bottom end was more around the 280 mark?? with some people living in fear on 300rwkw

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/#findComment-1853145
Share on other sites

lowering the compression is a safe method so the engine doesnt go boom. also im talking about potenza re01, which are very good for drag application....

wtf they are probably one of the worse drag tyres you could use being low profile etc

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/#findComment-1853712
Share on other sites

lowering the compression is a safe method so the engine doesnt go boom. also im talking about potenza re01, which are very good for drag application....

As far as I know it allows you to run more boost safely. It doesnt make the engine stronger..

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/#findComment-1854162
Share on other sites

a stock r33 gtr run 12.8 with re01 and stock evo9 run low 12's with re01 i through they were good street tyres (never said they were good drag radiials) :blink: guess im wrong, so will take back comments :)

and 33SOM, i didnt say it made the engine stronger i said it was a safety method....

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/#findComment-1854377
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
×
×
  • Create New...