Jump to content
SAU Community

Recommended Posts

Hi All,

Advise & Idea is much appriciate....my aim is 11s on my A31/R33. What I have now:

1. Garret GT30 (700177-018) with Tial 38mm

2. Highmount manifold

3. 71mm Throttlebody from Alfa

4. 6x 510cc injector from mitsubishi Evo3

5. Frontmount intercooler from Mitsubishi Evo3

6. 17" x 235 Yokohama street tyre.

Can someone list up the other supp. mod to archieve 11sec.

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/
Share on other sites

drag radial, fuel reg & fual pump will be in hand soon BUT should I change the engine management ?????

I got experience with microtec LT8x on my evo3 & run for 10s. Alots problem on tuning due to the microtec tunner in my place are limited. (400km from my place)

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/#findComment-1849478
Share on other sites

You most definitely do not need 300+rwkw to break into the 11s. Sydneykid has told us about an r34 with 260 odd kilowatts that did an 11.

An r33 is even lighter. I have a friend who is a good driver and on a perfect day, perfect launch etc, he just cracked an 11 with 250 odd rwkw in a 33 gtst on bfg drag radials.

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/#findComment-1849537
Share on other sites

You most definitely do not need 300+rwkw to break into the 11s. Sydneykid has told us about an r34 with 260 odd kilowatts that did an 11.

An r33 is even lighter. I have a friend who is a good driver and on a perfect day, perfect launch etc, he just cracked an 11 with 250 odd rwkw in a 33 gtst on bfg drag radials.

im not saying this isnt possible just that id sure love to see that :P

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/#findComment-1849741
Share on other sites

260kws is pushing the stock internals to their limits (isn't it?) if you want to do it once it should handle it.

I thought the safe limit for a stock r33 bottom end was more around the 280 mark?? with some people living in fear on 300rwkw

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/#findComment-1853145
Share on other sites

lowering the compression is a safe method so the engine doesnt go boom. also im talking about potenza re01, which are very good for drag application....

wtf they are probably one of the worse drag tyres you could use being low profile etc

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/#findComment-1853712
Share on other sites

lowering the compression is a safe method so the engine doesnt go boom. also im talking about potenza re01, which are very good for drag application....

As far as I know it allows you to run more boost safely. It doesnt make the engine stronger..

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/#findComment-1854162
Share on other sites

a stock r33 gtr run 12.8 with re01 and stock evo9 run low 12's with re01 i through they were good street tyres (never said they were good drag radiials) :blink: guess im wrong, so will take back comments :)

and 33SOM, i didnt say it made the engine stronger i said it was a safety method....

Link to comment
https://www.sau.com.au/forums/topic/101262-11s-rb25det-s2/#findComment-1854377
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
    • No, you're wrong, and you've always been wrong about this. The Nismo has 2 sets of openings. One is a real 2-way, and the other is a 1-way. There is no 1.5-way possible with the ramps that they offer. A real 1.5-way does exist. That Cusco stuff I posted is a prime example. If the forward drive ramps are, say 55°, and the overrun ramps are, say, 30°, then you will get about half as much LSD effect on overrun than you do on drive. It is real, it realy works. OK, you're slightly right. The Nismo has 55° and 45° ramps on the 2-way, so it does offer less LSD effect on overrun. But, I think that just means that they've (probably) sensibly established that you do not want actually equal LSD effect on overrun. You just want "quite a lot, but not quite as much as the drive LSD effect".
    • Just wanted to unearth this and post my baby with the new front ❤️😝 Took her to my wedding rehearsal today. Next up is getting wide skirts (after wedding)
×
×
  • Create New...