Jump to content
SAU Community

Recommended Posts

Hey all,

Just a quick note to everyone competiting in 2006 in track days that there is a new requirement for Modified Skylines to be equipped with a harness when competiting in the WRX Club events. i.e. cars that fall into either our Modified RWD or Modified AWD classes. But all cars should consider one anyways. They make driving around a track so much easier as you dont have to try and hold yourself in place whilst driving.

I can recommend Meridian Motorsport as a good source for these.

Cheers

Snowy.

  • Replies 81
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Had a qick look, doesn't seem to be a set of rules re: modifications anywhere. Or am I just a useless searcher?

I'm guessing mine, now that it has the RB25DET, would be classed as "modified".

Last year in our classes we set the rules for modified as:

changes to 2 or more of - turbo, fuel pump and injectors

or

semi-comp tyres

or

complete engine upgrade.

all other mods were free in "standard" class.

The 4 point harness from Meridian was around $400 from memory.

Just to clarify, this seems to be a Supp Regs thing, so whilst CAMS allow you to enter a Club Sprint with a non - FIA approved harness, or an expired harness provided it is installed correctly and in good condition...am i right in saying that we need as a min FIA approved 3" 4 point harnesses...and fastened in the correct manner?

Also, check that your build doesnt dictate that you need a 5 point harness. Read your manuals to see how the buckles should sit when you are strapped in, asincorrectly adjusted harnesses can be veruy dangerous in an accident.

Not hard to get right, but easy to get wrong :D

Is it worth trying to organize a group buy or a discount through a supplier since there will be so many members that will require harnesses before the first wrx day? Do the wrx club have anything organized? Just thought I might ask so it may save some of us a little money. It is a reasonable ask, just look at the times some of the cars are doing now and roll cages aren't required. One day a car will have a massive crash and if somebody gets really hurt it may put club racing out of many peoples reach due to insurance or over regulation. Just my thoughs. Worth the money! Can't put a price on your life.

This may be a stupid question, in relation to the harnesses, for new drivers if they are considering entering into a "Driver Training" section is the car required to have 2 harnesses fitter for driver and passenger? Or is Driver Training different and doesn’t require any harnesses??

I have a pair of Willians LD6 4/6-point harnesses fitted in the R34... FIA approved and expire in 2009 or something. they really keep you in your seat! But I'd also highly recommend a full bucket seat, soo much easier to concentrate on cornering when you dont have to hold on to the transmission tunnel with one hand to stop yourself from sliding around :lol: The only downside is they are a prick to get in and out of....

gareth - i think meridan give a pretty decent price to us as its stands anyhow.

but im sure if a few of you get your a$$es into gear and walk in there asking for 5 or more sets you mighty be able to come to some agreement

Why?

you have a quick release, its no different to a seatbelt in terms of getting "out" of a car incase of an accident

Probablt easier to find IMO as if your upside down, the seatbelt buckle isnt that hard to find... and i speak from expirience ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...