Jump to content
SAU Community

Recommended Posts

wouldn't i go for bkr7es (or bcpr7es) for the colder plug? or am i getting confused?

Black soot would indicate a hotter plug is needed but you might not need to change the plug if gapping it down does the trick.

ahh yep i get it, so the plug is hotter to help burn off the soot, or another way, so its not a cool area in the cylinder for the soot to form on...

That is a dangerous game to play. I would say your plugs are sooty for different reasons, most likely just rich A/F ratios the car could be R & R'ing or could just have a rich idle (bung O2 sensor) or just be a normal rich running RB with upped boost.

If your car is in any way modified, I wouldn't recommend hotter plugs; standard 6's would be a minimum.

Edited by SKiT_R31
  • 2 weeks later...

just changed my ngk coppers (bkr6es-11's) to bosch fr7dp's (equivalent to ngk platinums gapped at 0.8) and the car is now drivable again. the coppers died after 5000km and on the day i changed plugs the car was barely drivable. was very sad.

still missing problems every now and then but that'll be the coilpacks, they're desperate for a change

  • 1 month later...

I have standard copper BCPR6ES and the car misses a few beats at idle.

At higher rpms I could not detect anything unusual.

(running 14PSI)

Is it normal that the car misses a few fires at idle?

RB25DET

Thanks and sorry for being slightly off topic.

Cheers,

Andrew

I have standard copper BCPR6ES and the car misses a few beats at idle.

At higher rpms I could not detect anything unusual.

(running 14PSI)

Is it normal that the car misses a few fires at idle?

if you're really keen to make it a bit smoother do a search, it's a pretty common problem but most people just leave it. first things to do are clean the iac and aac valves, there are diy's on them in the diy section...

but as said above, it's pretty normal

miss at idle is usually the ignitor getting tired, pretty common

Thanks guys .. I was a bit worried about the pops at low idle.

And to contribute something to this thread:

I am using these V-Line Spark plugs in my Skyline (on the right)

VLine

NGK on V-Line

I have no idea if there is any advantage to multi electrodes, but on my motorcycle it really made a difference.

(though I don't believe in Snake-Oil :verymad:)

And here's a link from NGK with some videos included (technical advice on installation):

NGK

More:

Edited by Torques
  • 2 weeks later...

i've had a miss fire problem for months and just assumed coilpacks. hadn't even thought to change plugs. i'll just go copper so that's BCPR6ES right? RB20 running 7 PSI?i drive fairly tame 70% of the time. i bring it up on full boost probably only once or twice every drive. so that means i should go a hotter plug? or doesn't it really matter and i should just get the bcpr6es?

i've had a miss fire problem for months and just assumed coilpacks. hadn't even thought to change plugs. i'll just go copper so that's BCPR6ES right? RB20 running 7 PSI?i drive fairly tame 70% of the time. i bring it up on full boost probably only once or twice every drive. so that means i should go a hotter plug? or doesn't it really matter and i should just get the bcpr6es?

go bcpr6es-11's cos it's stock boost. 6 is a hotter plug, 5 is recommended. have a read of earlier pages in this thread, plenty of answers there

  • 2 weeks later...

After finally getting my FMIC return flow installed, it took me awhile to narrow down this thing my car is now doing. If you've ever had or driven a front wheel drive car with maybe old or spongy front shocks, you'd know the feeling when you are trying to floor it and hit bumps. The car kind of shudders a little and you can feel the traction slipping.

Now with my car I have a standard turbo running the ground boosting trick. What happens is when I put my foot down, there is for sure more power there, but there's also this feeling like the car is slipping or hiccuping. Could this be due to my Bosch Plats being gapped at 1.1?

I don't know where to start to go about fixing my problem, but at first I thought I was just imaging it, but after driving around more it's there for sure. Oddly I notice it more than I have the Overdrive ON. When it's OFF and I have the Power/Snow switch set to Power it still does it, but I think the increase in revs is helping to hide the fact I've got a problem somewhere.

So guys, where do I start to look at this problem?

go bcpr6es-11's cos it's stock boost. 6 is a hotter plug, 5 is recommended. have a read of earlier pages in this thread, plenty of answers there

5 is a hotter plug, 6 is reccomended. 7 Is a colder plug and is more ideal if running more than stock boost imo. Also, a 1.1 gap is fine providing your coilpacks are in good shape, but 0.8 are what your supposed to run and will give you the least issues (especially if your coilpacks are getting old).

After finally getting my FMIC return flow installed, it took me awhile to narrow down this thing my car is now doing. If you've ever had or driven a front wheel drive car with maybe old or spongy front shocks, you'd know the feeling when you are trying to floor it and hit bumps. The car kind of shudders a little and you can feel the traction slipping.

Now with my car I have a standard turbo running the ground boosting trick. What happens is when I put my foot down, there is for sure more power there, but there's also this feeling like the car is slipping or hiccuping. Could this be due to my Bosch Plats being gapped at 1.1?

I don't know where to start to go about fixing my problem, but at first I thought I was just imaging it, but after driving around more it's there for sure. Oddly I notice it more than I have the Overdrive ON. When it's OFF and I have the Power/Snow switch set to Power it still does it, but I think the increase in revs is helping to hide the fact I've got a problem somewhere.

So guys, where do I start to look at this problem?

It's common for a missfire to clear in the higher revs, its definitely your gap, i would down it to 0.8. If you still have issues you need to source some new coil packs - you can happily gap down to ~ 0.6 but any lower and you start to really hurt your idle and light throttle/off boost.

It's common for a missfire to clear in the higher revs, its definitely your gap, i would down it to 0.8. If you still have issues you need to source some new coil packs - you can happily gap down to ~ 0.6 but any lower and you start to really hurt your idle and light throttle/off boost.

Ah ok. I still have my old Autolite plugs, so might clean them up, gap them to 0.8 and see if that cures anything. If it does, then I'll have a go at gapping the Bosch Plats. I don't want to damage them if it turns out it's not the gap, so the Autolites will be testers hehe.

bosch plats gapped at 0.8 are like $5 more than the 1.1's, well worth the dollars cos u dont have to risk damaging them

Where can you buy them from? I got mine from Repco or something for a 6 pack @ $38 or something. They only had the 1.1 gapped ones.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...