Jump to content
SAU Community

Recommended Posts

Can anyone help me? i have a clicking noise on my r32 .. when ever i take off it clicks, change gears it clicks, turn a bend it clicks, gear down it clicks, even boost spools up quikly it will click under the load. the clicking sound is kinda like the sound if you got a pebble stuck in you tire and it clicks as it rolls over it.

i have no pebbles

i can also slightly feel it on the peddles. has anyone ever had this problem b4... if so please ease my pain..

thanks guys!

Link to comment
https://www.sau.com.au/forums/topic/105663-clicking-noise-driving-me-insane/
Share on other sites

How about a description of WHAT causes it?

does it increase in frequency with speed (drivetrain) or rpm (engine)?

how does cornering affect it (suspension)

from your 'pebble on tyre', perhaps you should try rotating all the tyres individually (by hand?)...

EDIT: fixed spelling

Edited by ebola

I have had this problem (attributable to increase in speed) it occurs for me when going over 80km/h and then disappears about 100km/h

It was not engine related. Why the past tense well...

I did the following

Secured fron fog lamp leads

Secured inner guard after lower section removed

Got tyres pulled off rims to remove dirt balls the build up sometimes

A HOST of other things to ni avail

Then one day...it just went away...had me stumped, mechanic stumped

Fulcrum stumped...its the little gremlin, maybe I went fast enough that he finally f#cked off

i had a constant clicking sound

it was one of the vents in the aircon system not closing quite properly, and it'd keep trying forever

click-click-click-click-click-click-click-click-click-click-click-click-click-click-click

hmm. has it had a manuel conversion done?

ive had it where the dust cover on the back of the box had a dent in it. rubbed the tailshaft each revolution.

also check the tailshaft for ware. ie.centre bearing(midle bit) and the unis.

also stones can get behind the brake disk backing plate. similar sound

but i really need to know if it speeds up with the car/engine ctc

ive got the same thing. firstly it was a screw in my tyre. got some coilovers put in and then got the puncture fixed. noise is still there. only happens on certain types of road surfaces and whenever i turn right. it is also relative to speed too.

Its got nothing to do with engine... now that you mention CVs. my mums camrys CVs were about to go and the sound was similar. my clicking noise only comes when i take off, gear down and sometimes when i plank it and boost picks up quikly....it is definatly at my right rear wheel... it clicks alot going up my drive way because of the up hill.... i just changed the shocks but i had this problem b4 hand so its not them ... im so confused

Can you swap the drive shafts left-2-right? See if that causes the sound to come from the left. That would start pointing the finger at the CV joint (which is my guess, regardless).

I dont know if this helps but my car clicks whenever i turn the wheel cos my steering rack needs to be overhauled. The r32s steering racks bugger up pretty quick around the 100k mark. But id desnt sond like it comes from there all the time but.

Another thing is i have on my car is cos its a fourdoor the seat belt is pretty slack once its on(due to the sorter front door). The socket or whatever u want to call, it clicks everytime i move it clicks dunno why but it clicks, very annoying.

hmm. has it had a manuel conversion done?

ive had it where the dust cover on the back of the box had a dent in it. rubbed the tailshaft each revolution.

also check the tailshaft for ware. ie.centre bearing(midle bit) and the unis.

also stones can get behind the brake disk backing plate. similar sound

but i really need to know if it speeds up with the car/engine ctc

clearly im wasting my time :)

Ooooooooooooooo! What an angry frog :(

By the looks of this thread you haven't checked back in since you started it but if it makes you feel any better i to have an R32 with the exact same click noise from the right hand wheel as well!

I'm a mechanic and have been meaning to have a crack at tarcking this gremlin down but haven't had enough time to even start the car let alone fix things for months. I also have access to a skyline Guru so i might even ask him if he has struck it before and will try to keep everyone informed

On mine = when stationary engage the clutch for a brisk take off and straight away as if with the torsion applied to the rear a very quick "click,click" and also occasionally after a stong acceleration with a sudden off throttle, same thing.

Once i held the hand brake on and tried it = still there = rules that out

Possibly a CV but thats an awful big call when there are so many other things You'd check prior and without disassembling you car! also when ever i've had CV's clicking it does it all the time in many driving conditions.

I think a pair of chassis ears will be the go.

But my first port of call would be to really clean up the rear brake pads and apply brake grease to any contact surfaces and make sure they hve the shims they're supposed to!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - there is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it     Apparently this is motorsport !  
    • Thanks, will do that.  Thankfully they still feel great.
    • Yeah man, absolutely. You can try pushing me all the way in swapping the R34 for an E9x M3 
    • It's almost certainly going to be some amount of pads compound transfer onto the rotors. It will probably go away after you've run them for a bit. If not, pull it all out, lightly sand the rotors, scuff the pads, and rebed.
    • no one recommending speedtek gearsets?   i'm in the same boat as Cosline but rwd, I am holding boost back in third to 600nm at the hubs to save the gear as i make nearly 750nm at the hubs on a mainline
×
×
  • Create New...