Jump to content
SAU Community

Recommended Posts

Hi guys

My alarm is farked so I'll be driving around without an alarm for next few weeks until I can put one in

I might be parking in some dodgey places and thought about removing a fuse in the mean time after I park the car.

Question is which fuse is the best to pull out and where is it? I prefer removing a blade fuse and not the type that is in its own box because its easier to carry around and keep spare blade fuses

Link to comment
https://www.sau.com.au/forums/topic/108343-removing-fuse-to-disable-car/
Share on other sites

Many fuses can be pulled out to disable car. Fuel pump, starter, ign etc. The one i used before i had an alarm installed was the ignition fuse from the fuse box in the engine bay.

A good idea when you decide which fuse to pull would be to replace the fuse you pull with a blown fuse. That way it is not obvious to the theif which fuse to replace.

My experience has generally been that they don't want the car, they only want what's in it.

Having an alarm didn't prevent them sitting inside and stealing the radio; so now I have installed one of those Jayco Screecher alarms (110dB @ 2kHz) - it certainly reminds them that they haven't been invited into the car.

Pulling a fuse is probably easier than disconnecting the AFM... and pulling the ignition or starter would give the same result as an immobiliser... so I figure most theives would assume that there is an immobiliser and just go to town ripping anything out of the car that they can.

Might want to wire up a flashing LED or something in the meanwhile. I feel much more comfortable knowing that my alarm has a flashing LED. Kinda deters theives from even bothering in the first place I guess.

What about one of those power inverters that give you 240v out of a 12v source? Rig that up to parts of the car that are metal but not grounded...

Might be better suited for electifying your wipers. No more parking tickets! ;o)

(jk people... don't do this)

I'll go with arh32, i have a burnt fuse I'll use to swap with my fuel pump fuse in the mean time, i think thats a great idea.
So good that now every bloody car thief who frequents these forums knows to carry around a spare fuse as the first remedy to pinch a car that won't start. (which is why I have never publicly announced my secret anti-theft weapon).
I feel much more comfortable knowing that my alarm has a flashing LED. Kinda deters theives from even bothering in the first place I guess.
You obviously didn't read my previous post - thieves could care less about flashing red LEDs.
Guest Xinhua
or hook up a switch to it?

im hooking up a kill switch on my car.

Thats what i did for my car mate.. theres a switch under my floorpanel.. very hidden.. can't start the car without pushing the switch.. you can put the key in and turn.. nothing will happen.. Works very well.. good luck

Thats what i did for my car mate.. theres a switch under my floorpanel.. very hidden.. can't start the car without pushing the switch.. you can put the key in and turn.. nothing will happen.. Works very well.. good luck

probably the best example ive seen of someone asking to get their car stolen.

saying youve got a kill switch - ok.

giving the exact location.... that shits just not smart dude.

I think it's good to flood the topic with information. The more people that give ideas, the more variety people can use, and any thief reading through will have to remember 20 different places for 50 different cars. He's not going to go through each and every one to find the "trick" to stealing it. On the other hand if we only heard about the blown fuse one, anyone without an alarm and without any better ideas would probably do it, and the thief would be able to casually check every car for blown fuses and probably get a couple easily.

It's probably best to use a combination of things. For example, pull a fuse as well as putting a kill switch in, or 2 kill switches in different areas. I've got 3 different things - club lock, alarm with starter kill, a separate 3 point immobiliser, and a kill switch. Sure you can always tow it but if the thief is determined nothing will stop him. The best defence I've found though is to not park it in dodgy areas.

Also a good idea for the kill switch is to not necessarily have it as one of those metal toggle switches. Something that doesn't seem like a switch to the touch, like a you press. A friend has a "toggle" button which you can push up or down for on/off. If you were feeling around without knowing about it you probably wouldn't even notice it, it would feel like one of those plastic screws you use for keeping the kick panel on.

a car i've driven before had a good idea. it was some kind of circuit linked to the starter. you had to complete the circuit to use the starter. you had to be touching the key with your right hand, and with your left reach down to a screw that holds on the left kick panel (side of center console) this would complete the circuit and allow you to start the car. quite a good one.

Well yes it can be towed. But opportunistic car thives dont have tow trucks at disposal.

As mentioned, if they really want your car they will get it.

A lot of my friends have kill switches and they are in some ingenius places, well hidden places and right in front of you places. Like using one of the factories blank switches and putting a switch there as the kill switch with "demister" for example. Multiple horn button steering wheels with one of the buttons used to complete the starter circuit. Another mate has a buggered electric aerial and you have to press the aerial up button to start.

But to reiterate what I said it can still go missing.

Mechanics are a good place where your guard is let down. You might of been there for 10 years and trust the guy with your life but his apprentice who started a week ago might need to move the car and ask "how do I start this thing". Then cut your key during his lunch break and....you get the idea.

Hey since you guys are tellling everyone your secrets about wiring and fuses now we have to do all of them at once so they cant guess which one it is! Or take the engine out with a crane and put it in our lunch box you morons!

Shut the f**k up and youse your brains!

Not everyone on these sites regardless if they own a skyline is trustwrthy!

I knew of a guy with a vl turbo with a rb25det and everyone of the performance parts he had on the car were ripped off other cars!

f**ks sake

LoL sorry. I didnt ask for any secrets

I actually pulled the fuel pump fuse out a few times in the past week and put a blown one in when going out, the peace of mind was more than worh it. I cant watch a movie knowing the car is not secured.

I got a very decent alarm installed on Sunday, I wont say what it is!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...